12 Volt Accessories
12V DC sockets, plugs, fuse holders, splitters and wiring accessories for automotive, marine, RV and mobile equipment power systems. Search by connector type or current rating and let ChatMRO match the accessory.
Browse →50 Hz Motors
AC induction motors wound and rated for 50 Hz supply frequency, used on equipment destined for Europe, Asia, Africa, and other 50 Hz grid regions. Search by horsepower, frame size and voltage, or describe the driven equipment and let ChatMRO match a motor.
Browse →A/C & Refrigeration Accessories
Manifold gauges, recovery equipment, charging hoses and leak-detection tools for servicing air conditioning and refrigeration systems, matched to the refrigerant type and system pressure. Search by accessory function and refrigerant, or describe the service task.
Browse →Abrasive Blasters
Siphon and pressure-feed blast cabinets, portable blast pots and soda blasting units for rust removal, surface preparation and deburring across metal, wood and concrete. Search by tank capacity, feed type and media compatibility, or describe the surface and coating you're removing and let ChatMRO match the equipment.
Browse →Abrasive Rolls
Cloth- and paper-backed abrasive rolls in aluminum oxide, silicon carbide and zirconia mineral, supplied in bulk lengths for cutting custom-sized sanding strips and belts. Search by grit and backing material, or describe the material being sanded and finish required.
Browse →ABS Pipe Fittings
Black ABS (acrylonitrile butadiene styrene) DWV fittings for drain, waste and vent plumbing, solvent-welded for a permanent leak-tight joint in 1-1/4 in. through 6 in. sizes. Search by fitting type and size, or describe the pipe run and connection needed.
Browse →Absorbent Maintenance Blankets
Bonded absorbent pads and rolls used to soak up oils, coolants and general shop fluids during maintenance work and spill response. Search by absorbency capacity, roll or pad size and fluid type.
Browse →Absorbent Pads
Oil-only, universal and hazmat-rated absorbent pads sized by absorbency capacity and application for spill control and routine maintenance. Search by fluid type and required absorbency and let ChatMRO match the right pad.
Browse →Absorbent Rolls
Perforated absorbent rolls in oil-only, universal and chemical-sorbent formulations, sized by roll width, length and absorbency capacity. Search by fluid type and roll size, or describe the spill risk and let ChatMRO match the roll.
Browse →Absorbent Socks and Booms
Flexible, tubular absorbent barriers filled with polypropylene or cellulose fill, used to contain and soak up spills on floors, in secondary containment, or floating on water. Search by absorbency type (oil-only vs. universal), length and diameter, or describe the spill scenario and let ChatMRO match the product.
Browse →AC Current Line Splitters
Multi-loop line splitter adapters that multiply the effective current reading of a clamp meter by 10x or more, letting technicians read small AC amperage draws that a single conductor pass would show too low to resolve accurately. Search by turn ratio and voltage rating, or describe the load you need to measure and let ChatMRO match the splitter.
Browse →AC Gearmotors
Parallel shaft, right-angle and inline AC gearmotors for continuous industrial drive applications, indexed by horsepower, gear ratio and output torque. Search by HP and ratio, or describe the driven load and let ChatMRO match the gearmotor.
Browse →AC Motors
Alternating-current induction motors for pumps, fans, conveyors and general industrial drive applications, specified by horsepower, NEMA/IEC frame size, voltage and enclosure type. Search by horsepower and frame, or describe the driven load and let ChatMRO match the motor.
Browse →AC Power Supplies
Regulated AC-DC power supplies in enclosed, open-frame and DIN-rail mount formats, for industrial control panels, automation equipment and electronics manufacturing. Search by output voltage or wattage and let ChatMRO match the supply.
Browse →AC Speed Controls
Variable frequency drives (VFDs) and simpler SCR/triac-based AC speed controllers that regulate the speed of AC motors by varying frequency or voltage, sized from fractional horsepower single-phase units to large three-phase industrial drives. Search by horsepower and voltage, or describe the motor and application and let ChatMRO match the control.
Browse →Accumulator Repair Kits
Seal and bladder replacement kits for bladder, piston and diaphragm-style hydraulic accumulators, matched to accumulator bore size and working fluid. Search by accumulator manufacturer, capacity and seal material, or describe the unit and let ChatMRO match the kit.
Browse →Accumulator Safety Blocks
Hydraulic accumulator safety blocks that isolate and safely bleed stored pressure before maintenance, in manual and lockable lever designs matched to standard accumulator ports. Search by pressure rating and port size, or describe the accumulator model and let ChatMRO match the block.
Browse →Acme Nuts
Trapezoidal-thread Acme nuts for lead screws, jackscrews and linear actuators, available in general-purpose 2G and precision 4C/5C fits. Search by thread size, class of fit and material, or describe the screw you're mating to.
Browse →Acorn Nuts
Domed cap nuts that enclose a bolt's exposed threads for appearance and injury protection, in low-crown and high-crown profiles, steel, stainless and brass. Search by thread size and material, or describe the bolt and finish and let ChatMRO match the nut.
Browse →Adhesion Tester Accessories
Replacement dollies, cross-cut blades, adhesive, and calibration accessories for coating adhesion testers used in pull-off, cross-cut, and tape-test methods per ASTM D4541 and D3359. Search by test method and instrument brand, or describe the coating and let ChatMRO match the accessory.
Browse →Adhesive Anchors
Two-part epoxy, polyester and vinylester resin systems that bond threaded rod or rebar into drilled holes in concrete, masonry or stone, rated to specific ICC-ES evaluation reports. Search by resin chemistry, rod diameter or base material, or describe the anchoring application.
Browse →Adhesive PSA Sanding Discs
Pressure-sensitive adhesive (PSA) backed sanding discs that stick directly to a sander's platen without hook-and-loop or clamped backing, for random orbital and disc sanders. Search by diameter, grit and abrasive mineral.
Browse →Adhesive Tape Measures
Self-adhesive rule tape strips for mounting to workbenches, saw fences, and machine tables, in steel and vinyl construction with left-to-right or right-to-left reading. Search by length and reading direction, or describe the machine you're fitting.
Browse →Adhesives, Sealants and Tape
Bonding, sealing and joining products spanning structural epoxies and cyanoacrylates, silicone and polyurethane sealants, and industrial-grade tapes, specified by chemistry, cure mechanism and substrate compatibility. Search by application or substrate, or describe the bonding task and let ChatMRO match the product.
Browse →Adjustable Pipe Supports
Height-adjustable pipe stands, roller supports and spring hangers that carry piping loads while accommodating thermal movement and installation tolerance. Search by load rating and adjustment range, or describe the pipe size and let ChatMRO match the support.
Browse →Adjustable Wrench Sets
Adjustable jaw wrench sets from 4 in to 18 in, in chrome-vanadium and drop-forged steel, covering general maintenance through heavy pipe and structural work. Search by jaw capacity and length, or describe the fastener you're turning and let ChatMRO match the set.
Browse →Adjustable Wrenches
Adjustable (crescent-style) wrenches with a movable jaw, sized by overall length and rated jaw opening capacity rather than a single fixed dimension. Search by required jaw opening and let ChatMRO match a wrench to your fastener range.
Browse →Aerosol Can Disposal Can Recycling System
Aerosol can puncturing and evacuation systems that empty and depressurize spent aerosol cans for recycling as scrap metal instead of hazardous waste disposal. Search by throughput and filtration type, or describe your waste stream and let ChatMRO match the system.
Browse →Aerosol Can Recycling Equipment
Aerosol can puncturing and depressurizing units that safely evacuate residual propellant and product from spent cans, letting the empty steel or aluminum shell be recycled as scrap metal instead of hazardous waste. Search by throughput and filtration type, or describe your can volume and let ChatMRO match the right unit.
Browse →Air Amplifiers
Compressed air amplifiers that entrain surrounding air to multiply a small compressed air input into a high-volume, low-pressure output flow, sized by inlet connection and amplification ratio. Search by inlet size and flow requirement, or describe the cooling, drying or conveying task.
Browse →Air and Vacuum Release Valves
Automatic air release, air/vacuum, and combination valves sized by connection and orifice, releasing trapped air during pipeline operation and admitting air during draining to prevent vacuum collapse. Search by valve type and connection size, or describe the pipeline application and let ChatMRO match the valve.
Browse →Air and Water Aftercoolers
Air-cooled and water-cooled aftercoolers reducing compressed air discharge temperature and knocking out bulk moisture immediately downstream of the compressor, sized to compressor horsepower and airflow. Search by cooling type, airflow capacity and compressor size, or describe the compressor you're pairing it with.
Browse →Air Belt Sanders
Pneumatic belt sanders for stock removal, weld blending and surface finishing on metal and wood, in narrow and wide-belt configurations. Search by belt size and free speed, or describe the material and finish and let ChatMRO match the tool.
Browse →Air Brake Tubing
DOT-approved nylon and copper air brake tubing sized for heavy truck, trailer and bus air brake and suspension systems, rated for the system's working pressure and temperature range. Search by outer diameter and material, or describe the vehicle system and let ChatMRO match the tubing.
Browse →Air Cannons and Man Coolers
Compressed-air blaster cannons for clearing bridged bulk material from bins, hoppers and chutes, plus vortex-tube and nozzle-style man coolers for spot personnel cooling at hot workstations. Search by tank size, discharge force or cooling capacity, or describe the application and let ChatMRO match the right unit.
Browse →Air Chain Hoists
Pneumatic chain hoists rated by load capacity, number of chain falls and lift height, built for continuous-duty and hazardous-area lifting where electric hoists aren't permitted. Search by capacity and lift height, or describe the load and duty cycle and let ChatMRO match the hoist.
Browse →Air Circulators
High-velocity drum, floor and wall-mount air circulator fans for moving large volumes of air across warehouses, shop floors and industrial spaces, rated by CFM and throw distance. Search by CFM and mounting style, or describe your space size and let ChatMRO match the circulator.
Browse →Air Cleaner Accessories
Replacement air filter elements, housings, pre-cleaners and clamps for engine air intake systems on industrial, agricultural and off-road equipment. Search by filter shape, media type and engine application, or describe the equipment and let ChatMRO match the part.
Browse →Air Cleaner Filters
Replacement intake air filters for engines, air compressors and industrial equipment, in paper, foam and oil-bath media types. Search by filter dimensions and media type, or describe your engine or compressor model and let ChatMRO match the filter.
Browse →Air Cleaners
Engine intake air cleaners, shop ambient air filtration units and industrial dust/mist air cleaners for engines, compressors and workspace air quality. Search by application, airflow (CFM) and filtration media, or describe the equipment or space you're filtering.
Browse →Air Cocks
Small-bore quarter-turn shutoff valves used to isolate or bleed compressed air lines at gauges, drain points and instrument connections. Search by port size, thread type and body material.
Browse →Air Compressor Pumps
Replacement and OEM reciprocating piston and rotary screw air compressor pump heads, in single and two-stage configurations rated by CFM output and maximum pressure. Search by CFM and stage configuration, or describe the compressor and let ChatMRO match the pump.
Browse →Air Conditioner Compressors
Scroll, rotary and reciprocating compressors sized for residential, commercial and automotive air conditioning systems, rated by cooling capacity and refrigerant type. Search by compressor type, refrigerant and tonnage, or describe the system you're replacing.
Browse →Air Conveyors
Air conveyors move lightweight parts, bottles or bulk material using directed airflow instead of belts or rollers, including air knife rail conveyors, pneumatic tube systems and air-slide bulk conveyors. Search by conveying method, product weight/type or throughput, or describe the material handling need and let ChatMRO match the right system.
Browse →Air Curtains
Air curtain units that project a continuous downward air stream across a doorway to separate conditioned indoor air from outdoor air, sized by door width and required air velocity. Search by door dimensions and application, or describe the doorway and let ChatMRO match the right unit.
Browse →Air Cut-Off Tools
Pneumatic cut-off tools that spin abrasive or carbide wheels at high speed for cutting bolts, sheet metal and exhaust components, in 3-inch and 4-inch wheel sizes. Search by wheel size and free speed, or describe the cutting task and let ChatMRO match the tool.
Browse →Air Disc Sanders
Pneumatic random orbital and gear-driven disc sanders for surface finishing, paint prep and material removal, sized by disc diameter and orbit stroke. Search by disc size and application, or describe the surface being finished.
Browse →Air Drills
Pistol-grip, angle and right-angle pneumatic drills rated by chuck capacity and free speed, for production drilling where continuous-duty torque outperforms cordless electric. Search by chuck size and speed, or describe the material and hole size and let ChatMRO match the drill.
Browse →Air Entrapment Products
Air admittance valves and anti-siphon air traps that allow air into a drain line to relieve vacuum and prevent trap siphonage, used where a conventional vent stack isn't practical. Search by connection size and pressure rating, or describe the drain line you're venting.
Browse →Air Filter & Element
Replacement air filter elements for compressed air intake, engine air cleaners and pneumatic system filtration, sized by micron rating and housing dimension. Search by application and micron rating, or describe the equipment and let ChatMRO match the element.
Browse →Air Finishing Sanders
Pneumatic random orbital, dual-action (DA) and in-line finishing sanders in 5, 6 and 8-inch pad sizes, for paint prep, composite finishing and metal blending. Search by pad size, orbit diameter and air consumption, or describe the finishing job.
Browse →Air Grinders
Pneumatic angle and die grinders for surface grinding, deburring and cutoff work, specified by disc/wheel size, free speed RPM and air consumption (CFM). Search by disc size and required RPM and let ChatMRO match a grinder to your shop air supply.
Browse →Air Gun Accessories
Nozzles, extensions, safety tips and inline accessories for pneumatic blow guns used in cleaning, drying and chip-clearing applications. Search by connection thread, nozzle style and maximum pressure, or describe the cleaning task and let ChatMRO match the right accessory.
Browse →Air Gun Nozzles
Replacement and upgrade nozzle tips for compressed air blow guns, engineered to reduce noise and static pressure to meet OSHA 29 CFR 1910.242(b) requirements while maintaining effective cleaning force. Search by tip style or noise rating, or describe the application and let ChatMRO match the nozzle.
Browse →Air Guns
Pneumatic blow guns for cleaning, drying and debris removal, sized by nozzle style, air consumption and OSHA dead-end pressure compliance. Search by application and inlet size and let ChatMRO match the right gun.
Browse →Air Hammer Chisel Retainers
Spring, clip and collar-style retainers that hold a chisel or bit in a pneumatic air hammer barrel, preventing accidental ejection during use. Search by shank size and retainer style, or describe the air hammer model.
Browse →Air Hammers
Pneumatic air hammers for chiseling, riveting, scaling and demolition work, rated by blow rate and stroke length, in standard and heavy-duty shank configurations. Search by shank size and application, or describe the material being worked and let ChatMRO match the tool.
Browse →Air Hose Electrical Cord Combination Reels
Retractable reels that spool both an air hose and an electrical cord together on a single mounted unit, reducing the number of separate reels needed at a workstation with combined air-tool and power-tool use. Search by hose/cord length, mount type or reel capacity, or describe the workstation setup.
Browse →Air Hoses
Compressed air hose in rubber, PVC and polyurethane construction, straight or self-storing coiled, sized by inside diameter and rated working pressure. Search by material and diameter, or describe the tool load and working environment and let ChatMRO match the hose.
Browse →Air Impact Wrenches
Pneumatic impact wrenches delivering high-torque rotational impacts for fastener removal and installation, sized by drive square and torque output. Search by drive size and torque range, or describe the fastener and application and let ChatMRO match the right wrench.
Browse →Air Knives
Pneumatic air knives producing a uniform, high-velocity laminar air curtain across a set blade length, for drying, cooling, cleaning and blow-off applications on production lines. Search by blade length and air supply pressure, or describe the process and let ChatMRO match the air knife.
Browse →Air Line Lockout Valves
Lockable ball, butterfly and plug valves for isolating and bleeding compressed air lines during lockout/tagout procedures. Search by pipe size, valve style and lockout mechanism, or describe the air system and let ChatMRO match the right valve.
Browse →Air Motors
Compressed-air-driven rotary motors used where electric motors are unsafe or impractical — vane-style motors for general industrial torque/speed duty and radial piston motors for high-torque, low-speed applications. Search by horsepower, RPM and rotation, or describe the driven load and let ChatMRO match the motor.
Browse →Air Nailers
Pneumatic framing, finish, brad and roofing nailers for construction and woodworking, sized by nail gauge and magazine capacity. Search by nail type and application, or describe the fastening job and let ChatMRO match the right nailer.
Browse →Air Operated Diaphragm Pumps
Air-operated double diaphragm (AODD) pumps in metallic and non-metallic bodies with PTFE, Santoprene, Buna and other diaphragm materials, sized by port diameter and flow rate for chemical, slurry and general fluid transfer. Search by port size and fluid compatibility, or describe the fluid being pumped and let ChatMRO match the pump.
Browse →Air Operated Grease Pumps
Pneumatic piston pumps that draw grease from a drum or pail and deliver it under high pressure through a hose to a grease gun or dispensing station, sized by pump ratio and matched to drum size and grease NLGI grade. Search by pump ratio and drum size, or describe your grease dispensing setup and let ChatMRO match the right pump.
Browse →Air Operated Pumps
Air-operated double diaphragm (AODD) pumps that transfer liquids using compressed air rather than electricity, in metallic and non-metallic wetted-part configurations. Search by port size, flow rate and material compatibility, or describe the fluid and duty cycle and let ChatMRO match the pump.
Browse →Air Operated Valves
Pneumatically actuated ball, butterfly, diaphragm and pinch valves for remote or automated on/off and control of process fluids and air. Search by valve type, actuator style and pipe size, or describe the process line and let ChatMRO match the right valve and actuator.
Browse →Air Pencil Grinders
Lightweight, high-speed pneumatic pencil (die) grinders for fine detail grinding, deburring and polishing in tight spaces, sized by collet diameter and free speed. Search by collet size and RPM, or describe the deburring task and let ChatMRO match the grinder.
Browse →Air Powered Airless Paint Sprayers
Pneumatic-driven airless sprayers that use a compressed-air motor to pump fluid to high pressure for atomization-free spraying, sized by pump ratio and maximum fluid pressure. Search by pump ratio and material type, or describe the coating job.
Browse →Air Powered Confined Space Fans and Blowers
Compressed-air-driven fans and blowers used to ventilate confined spaces where electrically powered equipment isn't permitted due to flammable atmosphere risk. Search by airflow rate and duct size, or describe the confined space and let ChatMRO match the ventilator.
Browse →Air Powered Hydraulic Pumps
Air-driven hydraulic pumps that convert low-pressure shop air into high-pressure hydraulic output, sized by air-to-oil pressure ratio, max output pressure and flow rate, for hydraulic tooling in hazardous or electricity-free environments. Search by output pressure and flow requirement, or describe the hydraulic tool being powered.
Browse →Air Ratchets
Pneumatic ratchet wrenches in 1/4 to 1/2 inch drive sizes, standard and slim-head profiles, for fastening in tight clearances where a full impact wrench won't fit. Search by drive size or torque output and let ChatMRO match the right tool.
Browse →Air Regulators
Compressed air pressure regulators for reducing and stabilizing line pressure to pneumatic tools, cylinders and process equipment. Search by port size and pressure range, or describe the downstream equipment and let ChatMRO match the regulator.
Browse →Air Sanders
Pneumatic random orbital, dual-action (DA) and in-line air sanders for automotive finishing and industrial surface prep, sized by pad diameter and orbit throw. Search by sander type and pad size, or describe the surface finishing task and let ChatMRO match the right sander.
Browse →Air Saws
Pneumatic reciprocating, body and hacksaw-style saws for cutting sheet metal, exhaust pipe and body panels, driven by shop air rather than electricity for lighter weight and continuous-duty cutting. Search by blade stroke and application, or describe the material being cut and let ChatMRO match the right saw.
Browse →Air Screwdrivers
Pneumatic screwdrivers with adjustable clutch mechanisms that disengage drive at a preset torque, sized for production-line fastening from delicate electronics assembly to structural panel work. Search by torque range, clutch type and RPM, or describe the fastener and assembly volume and let ChatMRO match the tool.
Browse →Air Staplers
Pneumatic staple guns for upholstery, narrow crown, wide crown and heavy-duty framing applications, sized to standard staple gauge and leg length ranges. Search by crown width, staple gauge or intended material.
Browse →Air Tapping Tools
Pneumatic tapping machines and reversible tapping arms that cut internal threads under controlled torque and speed, sized by tap size range and torque capacity. Search by tap size range and application, or describe your production tapping job and let ChatMRO match the tool.
Browse →Air Velocity Indicators
Vane, hot-wire and rotating vane anemometers for measuring air velocity and volumetric flow in ducts, at diffusers and in open-area airflow. Search by sensor type, velocity range and duct size, or describe the airflow measurement you're taking.
Browse →Air Velocity Meters and Anemometers
Vane, hot-wire and pitot-tube anemometers for measuring air velocity, volumetric airflow and temperature in HVAC ducts, cleanrooms and industrial ventilation. Search by sensor type and velocity range, or describe the measurement application and let ChatMRO match the instrument.
Browse →Air Vent
Automatic float-type and manual key-operated air vents that release trapped air from hydronic heating loops, chilled water systems and hydraulic lines, in NPT and sweat connection sizes. Search by connection size and pressure rating, or describe the system and let ChatMRO match the vent.
Browse →Air Winches
Pneumatic (air-powered) winches for pulling, lifting and tensioning loads in environments where electric winches pose an ignition risk, rated by line pull capacity and air consumption. Search by capacity and duty cycle, or describe your application and let ChatMRO match the right winch.
Browse →Air, Oil and Water Solenoid Valves
Direct-acting and pilot-operated solenoid valves rated for compressed air, hydraulic oil and water media across 2-way and 3-way configurations. Search by media type, port size and voltage, or describe the application and let ChatMRO match the valve.
Browse →Airless Spray Guns
High-pressure airless spray guns for atomizing paint and coatings without compressed air, rated for use with piston and diaphragm airless pumps. Search by max pressure rating, tip size compatibility and trigger style.
Browse →Airless Spray Tips and Tip Guards
Reversible carbide-orifice spray tips and cutoff safety guards for airless paint sprayers, sized by orifice diameter and fan pattern width. Search by tip size and fan angle, or describe the coating and surface you're spraying and let ChatMRO match the right tip.
Browse →Airline Filtration and CO Monitors
Breathing-air filtration panels and inline carbon monoxide monitors used with supplied-air respirators and airline breathing systems, filtering compressor output to Grade D breathing air quality and alarming on CO breakthrough. Search by CFM rating and alarm type, or describe your compressor setup and let ChatMRO match the system.
Browse →Alignment Tools
Alignment tools measure and correct the relative position of coupled shafts, pulleys, and belts to reduce vibration and premature bearing wear. Search by measurement method, accuracy, and application, or describe the equipment you're aligning and let ChatMRO match the right tool.
Browse →Alloy Steel Blanks, Flats, Bars, Plates and Sheet Stock
Alloy steel mill stock in blanks, flat bar, round bar, plate and sheet form, in grades like 4140, 4340 and 8620, supplied annealed, normalized or quenched-and-tempered. Search by grade, dimension and condition, or describe the machining or heat treat plan and let ChatMRO match the right stock.
Browse →Aluminized Hoods, Gloves and Sleeves
Reflective aluminized-fabric hoods, gloves and sleeves that protect against radiant heat and molten metal splash in foundry, furnace and welding environments. Search by protection type and garment style, or describe your heat exposure and let ChatMRO match compliant PPE.
Browse →Aluminum Angle Stock
Extruded and structural aluminum L-angle stock in equal and unequal leg configurations, common alloys 6061-T6 and 6063-T52, for framing, brackets and trim applications. Search by leg dimensions and alloy, or describe the structural or fabrication use.
Browse →Aluminum Extrusions
T-slot framing profiles, custom shapes and stock architectural extrusions in 6061 and 6063 alloy. Search by profile size and slot type, or describe the frame you are building.
Browse →Aluminum Foil Rolls
Bulk aluminum foil rolls in food-grade and industrial gauges, from light-duty 1235 alloy wrap foil to heavier 3003 alloy HVAC and insulation-facing foil. Search by thickness (gauge/mil), width and alloy, or describe the application you're specifying foil for.
Browse →Aluminum Grating
Welded, swaged and riveted aluminum bar grating for corrosion-resistant walkways and platforms, sized by bearing bar spacing and load class rather than panel dimensions alone. Search by load requirement and span and let ChatMRO match a grating spec.
Browse →Aluminum Tubing
Round, square and rectangular aluminum tubing in 6061-T6 and 6063-T5 alloys, sized by outer diameter and wall thickness for structural framing, hydraulic lines and general fabrication. Search by alloy and cross-section, or describe the application and let ChatMRO match the tubing.
Browse →Aluminum Tubing Fittings
Compression, flare and push-to-connect fittings for aluminum tubing, used in pneumatic, hydraulic and structural framing applications. Search by connection type and tube OD, or describe the system and let ChatMRO match the fitting.
Browse →American Glass and Ceramic Fuses
US-standard cartridge fuses in glass and ceramic bodies, sized to AGC, MDL, MDA and AGU dimensional standards for control circuits, automotive and small equipment protection. Search by amperage, voltage rating and body length, or describe the circuit and let ChatMRO match the right fuse.
Browse →Analog Multimeters
Needle-display analog multimeters for AC/DC voltage, current and resistance measurement, specified by measurement range and sensitivity (ohms-per-volt). Search by voltage range or describe the testing application and let ChatMRO match the meter.
Browse →Analog Panel Meters
Edgewise and round analog panel meters for continuous voltage, current and frequency monitoring on switchgear, control panels and generator sets, in standard DIN cutout sizes. Search by measurement type and range, or describe the panel cutout and application.
Browse →Anchor Bolts
Wedge, sleeve, drop-in and chemical anchor bolts for fastening equipment and structures to concrete and masonry. Search by diameter and base material, or describe the load and substrate and let ChatMRO match the anchor.
Browse →Anchor Kits
Complete anchor kits — anchor, drill bit, and installation tool matched together — for fastening into concrete, masonry and block, in mechanical (wedge, sleeve, drop-in) and chemical (epoxy, polyester) types. Search by anchor type and base material, or describe the load and let ChatMRO match the right kit.
Browse →Anchor Screws
Self-tapping concrete screw anchors and masonry anchor screws in hex, flat and washer head styles, zinc and mechanically galvanized, for direct-to-base-material fastening without a separate expansion anchor. Search by diameter, length or head style.
Browse →Anchor Setting Tools
Hand-driven and powder-actuated setting tools sized to specific anchor diameters, for installing drop-in, wedge, sleeve and screw anchors in concrete and masonry. Search by anchor type and size, or describe the anchor being installed and let ChatMRO match the right tool.
Browse →Angle Clamps
Corner-holding clamps that fix two workpieces at a precise angle (typically 90 degrees) for welding, framing, or assembly, freeing both hands to tack-weld or fasten the joint. Search by jaw capacity and angle type, or describe your joint and let ChatMRO match the right clamp.
Browse →Angle Grinders
Corded and cordless angle grinders from 4-1/2 in. to 9 in. disc capacity for cutting, grinding, and surface preparation on metal, concrete and masonry. Search by disc size, power source and no-load RPM.
Browse →Angular Contact Bearings
Ball bearings designed to support combined radial and axial (thrust) loads via races offset at a contact angle. Search by contact angle, bore diameter, or duplex pairing arrangement (back-to-back, face-to-face, tandem).
Browse →ANL and ANN Limiter Fuses
Bolt-on bar-style limiter fuses used to protect high-current DC circuits such as battery banks, marine electrical systems and audio installations. Search by amperage rating, fuse class (ANL vs ANN) and bolt spacing.
Browse →Annular Cutters
Annular (broach-style) cutters that drill clean, fast holes in steel by removing only a thin ring of material, used with magnetic drills and mag-drill presses. Search by cutting diameter, depth of cut or shank type, or describe the material and hole size and let ChatMRO match the right cutter.
Browse →Anti-Fatigue Mats
Ergonomic anti-fatigue mats reducing worker leg and back fatigue at standing workstations, from general-purpose foam mats to grease-resistant and ESD-safe options. Search by material, thickness and workstation environment, or describe the application and let ChatMRO match the mat.
Browse →Anti-Slip Tapes
Abrasive-coated, adhesive-backed safety tapes for stairs, ramps, walkways and equipment platforms, in coarse, medium and fine grit grades. Search by grit rating and substrate, or describe the walking surface and let ChatMRO match the right tape.
Browse →Anti-Vibration Gloves & Wraps
Gel and foam-padded anti-vibration gloves and tool handle wraps that reduce transmitted vibration exposure for operators of impact wrenches, grinders, and other high-vibration tools, rated to ANSI S2.73/ISO 10819. Search by damping material and coverage, or describe the tool and let ChatMRO match the PPE.
Browse →Antistatic Accessories
Wrist straps, heel grounders, ESD mats, grounding cords and ionizers for controlling electrostatic discharge around sensitive electronic components. Search by accessory type and workstation setup, or describe the ESD-sensitive process you're protecting.
Browse →Antistatic Gloves
ESD-safe gloves that dissipate static charge during handling of sensitive electronic components, sized and rated by surface resistivity. Search by material, size and cuff style, or describe the components you're handling and let ChatMRO match the glove.
Browse →Antistatic Table Mats and Sheets
ESD-safe work surface mats and sheets in rubber and vinyl construction, rated by surface resistance and sized for bench or table coverage, for grounding static charge during electronics assembly and repair. Search by mat size and resistance rating, or describe your bench setup and let ChatMRO match the mat.
Browse →Antistatic Wrist Strap Kits
Adjustable and disposable ESD wrist strap kits with coiled ground cords, banana or snap connectors, for grounding personnel at electronics assembly and repair benches. Search by resistance value or connector style and let ChatMRO match a compliant kit.
Browse →Antistatic Wrist Straps
ESD-safe wrist straps that ground the wearer to a common point, preventing static discharge damage to sensitive electronic components during handling and assembly. Search by resistance rating and connector type, or describe your workstation setup and let ChatMRO match the right strap.
Browse →Appliance Hand Trucks
Heavy-duty hand trucks reinforced for moving refrigerators, washers and other large appliances, with stair-climbing rollers or tri-wheel assemblies, wide toe plates and ratchet or cam-buckle securing straps. Search by load capacity, frame type and stair-climbing feature, or describe the appliances being moved and let ChatMRO match the right hand truck.
Browse →Arbor Press
Manual rack-and-pinion arbor presses for bearing installation, staking and precision assembly work, specified by tonnage capacity, ram stroke length and bench or floor mounting style. Search by tonnage or describe the pressing application and let ChatMRO match the press.
Browse →Arc Flash Clothing Kits
Arc flash clothing kits are complete PPE sets — coveralls or jacket-and-bib combinations, face shield, hood, and gloves — rated to a specific arc thermal performance value (ATPV) for protection against arc-flash incident energy. Search by cal/cm2 rating, kit contents, and standard compliance, or describe the incident energy at your equipment and let ChatMRO match the right kit.
Browse →Arc Welder Accessories
Electrode holders, ground clamps, welding cable and connectors for arc (stick/SMAW) welding setups, specified by amperage rating, cable gauge and connector type. Search by amperage and connector style and let ChatMRO match compatible accessories.
Browse →Ash Trays, Cigarette Receptacles & Ash Tray Sand
Wall-mount, post-mount and freestanding cigarette receptacles, tabletop ash trays and replacement ash sand, for designated outdoor smoking areas at commercial and industrial facilities. Search by mounting style or capacity and let ChatMRO match the receptacle.
Browse →Asphalt Testing Compactors
Laboratory compaction equipment used to prepare asphalt mix specimens to a controlled density for testing — Marshall impact hammers and Superpave gyratory compactors. Search by compaction method or mold diameter, or describe your mix design testing requirement and let ChatMRO match the equipment.
Browse →Asphalt Testing Compression Machines
Marshall stability testers, Superpave gyratory-compatible load frames and general compression testing machines for asphalt mix quality control, rated for standard ASTM and AASHTO load capacities. Search by test method and load capacity, or describe the asphalt testing program.
Browse →Atomizing Spray Nozzles
Air-atomizing and hydraulic (pressure) atomizing spray nozzles that break liquid into fine droplets for cooling, coating, humidification and dust suppression, sized by flow rate and droplet size. Search by application and spray pattern, or describe the liquid and process and let ChatMRO match the right nozzle.
Browse →Attached Lid Containers
Storage totes and bins with a hinged lid permanently attached to the container body, preventing lid loss and speeding closure compared to a separate snap-on lid. Search by capacity, stacking style and material, or describe the storage or transport need and let ChatMRO match the container.
Browse →Attic Exhaust Ventilators
Attic exhaust ventilators pull hot, moist air out of an attic space through roof or gable-mounted fans, sized by CFM against attic square footage to reduce shingle temperature, moisture buildup and cooling load.
Browse →Attic Ladders
Pull-down folding ladders that mount in a ceiling opening to provide attic or loft access, in wood, aluminum and steel construction rated for ceiling heights from 7 to 10+ feet and load capacities up to 375 lbs. Search by ceiling height, load rating and material, or describe the opening size and let ChatMRO match the ladder.
Browse →Audio Speakers
Industrial paging horns, weatherproof PA speakers and 70V/100V distributed audio speakers for facility announcements, alarms and background paging, sized by power rating and line voltage. Search by mounting type and impedance, or describe the coverage area and let ChatMRO match the speaker.
Browse →Audio Video Cables
HDMI, coax, XLR and speaker cables for industrial and commercial audio-visual signal transmission. Search by connector type and cable length, or describe the AV equipment and let ChatMRO match the cable.
Browse →Audio Video Splitters, Connectors and Adapters
Signal splitters, connectors and adapters for routing and converting HDMI, VGA, coax, component and analog audio signals between mismatched equipment. Search by signal type and connector standard, or describe the source and destination equipment.
Browse →Automatic and Magnetic Door Holders
Wall- and floor-mounted electromagnetic door holders that release fire doors automatically on fire alarm signal, plus manual magnetic door holders for everyday convenience. Search by holding force, mounting type and voltage, or describe the door weight and fire-rating requirement and let ChatMRO match the holder.
Browse →Automatic Flush Valve Retrofit Kits
Sensor-operated retrofit kits that convert existing manual flush valves on toilets and urinals to automatic, touch-free operation without replacing the entire valve body. Search by valve brand compatibility, power source and fixture type, or describe the existing flush valve you're converting.
Browse →Automatic Flush Valves
Sensor-operated (touchless) flush valves for toilets and urinals that trigger automatically on user departure, reducing surface contact and controlling water use per flush. Search by fixture type, power source and flush volume, or describe the retrofit or new installation.
Browse →Automotive Battery Chargers and Boosters
Smart chargers, trickle/maintenance chargers, and portable jump-start boosters for 6V, 12V and 24V automotive, marine and powersport batteries. Search by charging amperage and battery voltage, or describe the vehicle and battery type you're servicing.
Browse →Automotive Belts
Serpentine (multi-ribbed), V-belts and timing belts for automotive and light-duty engine accessory and camshaft drives, specified by rib/tooth count, length and profile. Search by belt type and dimensions and let ChatMRO match the part.
Browse →Automotive Cleaners and Degreasers
Chlorinated, non-chlorinated and water-based cleaning formulations for brake components, engine surfaces and general shop parts degreasing. Search by formulation type, application method and container size, or describe the cleaning task and let ChatMRO match the right product.
Browse →Automotive Fuses
Automotive fuses protect vehicle wiring harnesses and accessory circuits by opening at a rated current, and come in mini, standard, maxi blade, cartridge and high-current bolt-down formats sized to match the physical fuse block and expected load.
Browse →Automotive Lamps and Bulbs
Automotive replacement bulbs for headlights, taillights, signal, marker and interior lighting, in halogen, LED and HID configurations. Search by bulb number, base type and application, or describe the vehicle and let ChatMRO match the bulb.
Browse →Automotive Loading Ramps
Steel and aluminum loading ramps for driving or winching vehicles and equipment onto trailers, trucks and service platforms, rated by weight capacity and sized by usable length and width. Search by weight capacity and length, or describe the vehicle and trailer height and let ChatMRO match the right ramp.
Browse →Automotive Mini Circuit Breakers
Compact resettable circuit breakers sized for 12V/24V automotive and marine wiring, in manual-reset (Type I), auto-reset (Type II) and modified-reset (Type III) configurations. Search by amperage rating and reset behavior, or describe the circuit and let ChatMRO match the breaker.
Browse →Automotive Specialized Tools
Automotive Specialized Tools, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Automotive Testing Instruments
Automotive testing instruments diagnose electrical, mechanical and emissions systems in vehicles, specified by function (scan tool, multimeter, compression tester), connector/protocol compatibility and vehicle coverage.
Browse →Automotive Wire & Cable
GXL, TXL and SXL primary wire, battery cable and trailer wire for automotive, marine and heavy-duty vehicle electrical systems. Search by gauge or insulation rating and let ChatMRO match the wire.
Browse →Auxiliary Contacts
Side-mounted and front-mounted auxiliary contact blocks adding extra NO/NC contacts to motor contactors and relays for status signaling and interlocking. Search by contact configuration and compatible contactor series.
Browse →Axes, Hatchets and Splitting Wedges
Felling axes, camp hatchets and steel splitting wedges in forged carbon steel, sized by head weight and handle length for forestry, firewood splitting and general outdoor use. Search by head weight and application, or describe the wood you're cutting or splitting.
Browse →Axial Fan Accessories
Finger guards, mounting brackets, filters and speed controllers that adapt and protect axial fans used for equipment cooling and ventilation. Search by fan frame size and accessory type, or describe your fan and let ChatMRO match the right accessory.
Browse →Axial Fans
Panel-mount, tube axial and duct axial fans that move air parallel to the fan shaft for equipment cooling, ventilation and duct airflow. Search by frame size, airflow rating and voltage, or describe the enclosure or duct and let ChatMRO match the right fan.
Browse →Backflow Preventers
Reduced pressure zone, double check valve and vacuum breaker backflow preventers for potable water protection, sized by pipe connection and hazard classification. Search by device type, pipe size or application.
Browse →Backpack Vacuum Cleaners
Body-worn commercial vacuum cleaners that distribute weight across a harness for extended cleaning sessions, rated by airflow, filtration level and tank capacity. Search by filtration type or power source, or describe your facility and let ChatMRO match the vacuum.
Browse →Baling Wire and Lockwire
Annealed and galvanized baling wire for compaction and bundling, plus stainless steel MS20995 lockwire (safety wire) for securing fasteners against vibration loosening. Search by wire gauge and material, or describe your application and let ChatMRO match the wire.
Browse →Ball Pein Hammers
Machinist's hammers with a flat striking face on one side and a rounded ball pein on the other, used for metalworking, riveting, punch and chisel work, and peening. Search by head weight or handle material, or describe the task and let ChatMRO match the right hammer.
Browse →Ball Transfer Tables
Ball transfer tables with grids of load-bearing ball transfer units that allow packages and pallets to be pushed or slid in any direction across a work surface. Search by ball spacing, load capacity and table dimensions, or describe the handling task and let ChatMRO match the table.
Browse →Ball Valve Connection Adapters
Adapters that convert a ball valve's end connection from one thread standard, size or fitting type to another — NPT to BSP, thread to flange, or size-to-size reducers. Search by thread standard and connection sizes on each side.
Browse →Ball Valves
Full-port and standard-port ball valves for on/off flow control, indexed by body material, port configuration and pressure/temperature rating. Search by pipe size and connection type, or describe the media and pressure and let ChatMRO match the valve.
Browse →Band Clamp Tools
Tensioning and cutting tools for stainless steel band clamps and banding systems, in manual and pneumatic drive, covering 1/4 in to 3/4 in band widths. Search by band width and drive type, or describe the installation you're doing and let ChatMRO match the tool.
Browse →Band Clamps
Worm-gear, T-bolt and heavy-duty V-band clamps for hose, ducting and exhaust connections, in 300-series stainless and zinc-plated steel. Search by clamping range and band width, or describe the hose OD and let ChatMRO match the right clamp.
Browse →Band Heaters
Mica, ceramic, and cast bronze/aluminum band heaters that clamp around cylindrical barrels, nozzles, and dies to provide radiant heat for plastics processing and industrial equipment, sized to specific inside diameters and widths with wattage matched to the heat load. Search by construction type and diameter, or describe the barrel size and process temperature and let ChatMRO match the heater.
Browse →Band Saw Accessories
Blades, blade guides, guide inserts, coolant systems and wheels for vertical and horizontal band saws. Search by blade width, TPI and saw model, or describe the material you're cutting and let ChatMRO match the accessory.
Browse →Band Saw Blades
Bi-metal, carbide-tipped and carbon steel band saw blades for metal and wood cutting. Search by length and tooth pitch, or describe the material you are cutting.
Browse →Band Saws
Horizontal, vertical and portable band saws for cutting metal stock and structural shapes, from manual pivot saws to programmable production machines. Search by cutting capacity and material, or describe the stock size and let ChatMRO match the saw.
Browse →Band Ties
Stainless steel and coated banding ties for heavy-duty cable bundling and mounting, sized by band width and tensile strength rather than treated as a scaled-up zip tie. Search by material and application and let ChatMRO match a banding system.
Browse →Bar Clamp Spreaders
Convertible bar and pipe clamp/spreader tools that switch between clamping and spreading configurations for woodworking glue-ups, frame assembly and light fabrication work. Search by throat capacity, bar material and jaw type, or describe the panel width you're clamping and let ChatMRO match the tool.
Browse →Bar, Pipe and L Clamps
Bar clamps, pipe clamp fixtures and L-shaped corner clamps used to hold workpieces during glue-up, assembly and fabrication, specified by jaw opening/throat depth and clamping force rather than length alone. Search by opening size, clamp style or application, or describe the workpiece being clamped.
Browse →Barbed Tube Fittings
Push-on barb fittings for flexible tubing and hose, in nylon, brass, stainless and polypropylene across straight, elbow and tee configurations. Search by tube ID and thread size, or describe the fluid and pressure and let ChatMRO match the fitting.
Browse →Barricade Lights
Type A flashing, Type B steady-burn and Type C 360-degree warning lights mounted on barricades and channelizing devices to mark traffic control zones per MUTCD requirements. Search by light type and power source, or describe the work zone application and let ChatMRO match the light.
Browse →Barrier and Safety Fence
Portable panel barriers, welded guardrail systems and temporary construction fencing rated for crowd control, fall protection and site perimeter security. Search by panel height, base style and application, or describe the hazard you're fencing off.
Browse →Barrier Flagging & Underground Tapes
Non-adhesive PVC flagging tape for temporary hazard barriers and detectable underground warning tape buried above utility lines to alert future excavators before contact. Search by tape type and utility color code, or describe the job and let ChatMRO match the right tape.
Browse →Bathroom Fans
Ceiling and wall-mount bathroom exhaust fans sized by CFM airflow rating, sone noise level and duct diameter to properly ventilate moisture and odor from a given room size. Search by room square footage or describe the ventilation need and let ChatMRO match the fan.
Browse →Bathroom Faucets
Single-handle, centerset and widespread bathroom faucets in a range of mounting configurations and valve types for lavatory sink installation. Search by mounting style and hole spacing, or describe the sink and installation.
Browse →Bathroom Sinks
Wall-mount, undermount, drop-in and vessel bathroom sinks in vitreous china, stainless steel and solid surface materials, sized for commercial and industrial restroom facilities. Search by mounting type and material, or describe the restroom layout and let ChatMRO match the sink.
Browse →Battery and Cable Connectors
Battery terminals, cable lugs and quick-disconnect connectors for power cable termination, in copper and tinned-copper construction across common wire gauge ranges. Search by wire gauge and terminal style, or describe your connection and let ChatMRO match the connector.
Browse →Battery Cable
Fine-strand welding-grade and automotive battery cable in AWG sizes from 6 to 4/0, rated for high-amperage DC power runs in vehicles, boats and welding circuits. Search by gauge, insulation rating and conductor material, or describe the amperage and run length and let ChatMRO match the cable.
Browse →Battery Clamps
Top-post, side-post and industrial lug-style battery terminal clamps in lead, brass or copper alloy for automotive, marine and stationary battery connections. Search by terminal post type and wire gauge, or describe the battery and application and let ChatMRO match the clamp.
Browse →Battery Testers
Load testers, digital voltage/conductance testers and handheld battery analyzers for automotive, industrial and standby power batteries, specified by test method and voltage/CCA range. Search by battery chemistry or describe the testing application and let ChatMRO match the tester.
Browse →Beam Clamps
Beam clamps for suspending pipe hangers, cable trays and equipment from structural steel flanges without welding or drilling. Search by flange width range, load rating or clamp style, or describe the beam and the load and let ChatMRO match the right clamp.
Browse →Beam Form
Steel and aluminum forming systems used to cast concrete beams to size, including adjustable beam forms, soffit forms and shoring accessories. Search by beam size and span, or describe the pour and let ChatMRO match the form system.
Browse →Bearing Accessories
Installation and maintenance accessories for rolling-element bearings — pullers, induction heaters, locknuts, withdrawal sleeves and seals — sized to bore diameter and bearing type. Search by accessory function or bearing series.
Browse →Bearing Heaters
Induction and ring-style bearing heaters for expanding bearings, gears, couplings and pulleys to install shrink-fit assemblies without contact-flame damage. Search by heating capacity, bore range and demagnetization feature, or describe the bearing size and let ChatMRO match the right heater.
Browse →Below the Hook Lifting Magnets
Below the hook lifting magnets attach to a crane hook to lift ferrous loads magnetically, specified by rated lifting capacity, magnet type (permanent, electromagnetic, electro-permanent) and load surface condition for material handling operations.
Browse →Belt Accessories
Lacing, mechanical fasteners, tensioning devices and alignment tools that install, join and maintain drive and conveyor belts. Search by belt type and function, or describe your belt width and application and let ChatMRO match the right accessory.
Browse →Belt Disc Sanders
Combination belt and disc sanders for stock removal, shaping and finishing, indexed by belt size, disc diameter and motor horsepower. Search by belt/disc size and table tilt range, or describe the material and finish and let ChatMRO match the sander.
Browse →Belt Drive Centrifugal In-Line Blowers
Belt-driven centrifugal in-line blowers decouple motor speed from wheel speed via sheaves, letting the same housing hit a wide range of CFM and static-pressure points for ducted exhaust and makeup-air systems.
Browse →Belt Drive Motors
AC induction motors configured with a shaft and mounting suited to pulley-and-belt power transmission, sized by horsepower, NEMA frame and base RPM for driving fans, pumps, compressors and general machinery. Search by horsepower and frame size, or describe the driven equipment you're powering.
Browse →Belt Sanders
Handheld and stationary bench belt sanders using a continuous abrasive belt for aggressive stock removal and surface leveling on wood and metal, sized by belt width/length and motor amperage. Search by belt size and application, or describe the material and stock removal task and let ChatMRO match the right sander.
Browse →Belt Tensioners and Tension Pulleys
Automatic spring-loaded and manual adjustable tensioners with idler pulleys sized for V-belt, timing belt and serpentine belt drives. Search by belt type and pulley bore, or describe the drive layout and let ChatMRO match the assembly.
Browse →Bench and Floor Scales
Digital bench scales and heavy-duty floor scales for shipping, receiving and process weighing. Search by capacity and platform size, or describe what you are weighing.
Browse →Bench Cans
Small-capacity OSHA-compliant safety cans for holding and dispensing flammable solvents at a workbench or parts-cleaning station, with spring-loaded lids and flame arrestors that self-close under fire exposure. Search by capacity and dispensing style, or describe your bench use and let ChatMRO match the right can.
Browse →Bench Grinder Accessories
Grinding wheels, wire wheels, tool rests, eye shields and replacement parts for benchtop grinders. Search by wheel diameter, arbor bore size and grit.
Browse →Bench Grinders
Bench-mounted grinders with dual grinding wheels for sharpening, deburring and general shop grinding, sized by wheel diameter and motor horsepower. Search by wheel size, RPM or wheel grit combination.
Browse →Bench Single Output DC Power Supplies
Linear and switching-regulated benchtop DC power supplies with a single adjustable output, rated by voltage and current range, for lab, R&D and production test applications. Search by voltage/current range and regulation type, or describe the load and let ChatMRO match the right supply.
Browse →Bench Vises
Bench-mounted clamping vises for machining, fabrication, woodworking and pipe work, specified by jaw width, maximum jaw opening and base type. Search by jaw width or application, or describe the workholding task and let ChatMRO match the vise.
Browse →Beverage Dispensers
Commercial gravity and pump-style beverage dispensers for cold drinks, juice, and bulk beverages, sized by capacity and dispensing mechanism for food service and hospitality settings. Search by capacity, dispensing type and material, or describe the beverage and volume and let ChatMRO match a dispenser.
Browse →Bib Overalls
Duck canvas, denim and flame-resistant bib overalls in insulated and uninsulated styles for cold-weather, welding and general industrial work. Search by fabric type and insulation rating, or describe the job environment and let ChatMRO match the bib.
Browse →Bin and Box Accessories
Dividers, label holders, hanging rails, lids and stacking accessories sized to fit standard small parts bins and storage boxes. Search by bin series compatibility, material and function, or describe your storage bin system and let ChatMRO match the right accessory.
Browse →Bin Cabinets
Steel storage cabinets fitted with removable bins and adjustable shelves for organizing small parts, fasteners and hardware, indexed by door style, bin count and shelf load rating. Search by cabinet size and bin configuration, or describe your storage need and let ChatMRO match the cabinet.
Browse →Bin Dividers
Adjustable and fixed-length dividers that snap or slide into stacking, hopper-front and shelf storage bins to split a single bin into multiple compartments. Search by bin series, divider material and length, or describe the bin you're outfitting.
Browse →Bin Shelving
Steel shelving units pre-configured with removable plastic or steel storage bins for organizing small parts, hardware and MRO inventory, sized from small hardware bins to larger stackable totes. Search by bin size, shelving configuration and load capacity, or describe the parts you're storing and let ChatMRO match the unit.
Browse →Binding Screws
Male/female barrel-and-screw fasteners (Chicago screws) that clamp layered materials together through a threaded barrel post and cap screw, sized by barrel length to match total material stack thickness. Search by barrel length and diameter, or describe the materials you're joining and let ChatMRO match the right screw.
Browse →Biohazard Spill Kits
OSHA bloodborne pathogen-compliant spill kits with absorbents, PPE, and disposal bags for cleaning up blood, bodily fluids, and other biological spills. Search by application setting and kit capacity, or describe your facility type and let ChatMRO match a kit.
Browse →Biohazard Waste Cans
Rigid biohazard and sharps waste containers for regulated medical waste, sized by capacity and specified to OSHA bloodborne pathogen and DOT transport requirements. Search by capacity and mounting style and let ChatMRO match a compliant container.
Browse →Bit Sets
Multi-piece sets combining driver bits, drill bits, or both in a single organized case, covering common drive types (Phillips, slotted, Torx, hex) and material grades for wood, metal, and masonry drilling. Search by bit type and application, or describe the fastener or material you're working with.
Browse →Black Pipe
Schedule 40 and Schedule 80 black (uncoated) steel pipe in threaded and plain-end configurations, sized 1/8 in through 12 in nominal, used for gas distribution, fire sprinkler, and structural applications where interior coating isn't required. Search by diameter and schedule, or describe the piping system and let ChatMRO match the pipe.
Browse →Black Pipe Nipple Assortments
Schedule 40 black malleable iron pipe nipple assortments in NPT sizes from 1/8 in. through 2 in., boxed in mixed close-to-12-inch length ranges for MRO stock. Search by size range and piece count, or describe the piping repair kit you need.
Browse →Blender and Drink Mixer Accessories
Replacement jars, blade assemblies, lids and drive components for commercial blenders and drink mixers used in foodservice and beverage operations. Search by jar capacity, blade configuration, or base model compatibility.
Browse →Blind Rivets
Open and closed-end blind rivets in aluminum, steel and stainless, sized by diameter and grip range for one-side sheet metal fastening. Search by diameter, grip length or head style.
Browse →Blocks and Sheaves
Snatch blocks, wire rope sheaves and pulley blocks used in rigging, hoisting and load-line applications, sized by rope diameter and rated working load limit. Search by block type or WLL requirement.
Browse →Blower and Fan Accessories
Fan guards, duct adapters, mounting brackets, speed controllers and replacement blades sized to axial, centrifugal and inline duct fans. Search by fan diameter, mount type or accessory function, or describe the airflow problem you're solving.
Browse →BNC Adapters
BNC bayonet-lock coaxial adapters that convert between BNC and other RF connector types (RCA, N-type, SMA, F-type), matched by impedance rating and connector gender. Search by conversion type and impedance, or describe the equipment and let ChatMRO match the right adapter.
Browse →Boiler Accessories
Boiler trim, controls, safety valves and water treatment accessories for steam and hot water boiler systems, specified by boiler type and pressure rating. Search by component type and boiler application, or describe your boiler system and let ChatMRO match the accessory.
Browse →Boiler Drain Valves
Quarter-turn ball and multi-turn boiler drain valves with hose-thread outlets, in brass and bronze bodies, for draining hydronic boilers, water heaters and low-pressure tanks. Search by connection size or pressure rating and let ChatMRO match the valve.
Browse →Boiler Feed Pumps
Multistage centrifugal pumps that deliver treated feedwater into a boiler against its operating pressure, sized to match boiler steam demand and rated discharge head. Search by flow rate and discharge pressure, or describe the boiler system and let ChatMRO match the right pump.
Browse →Boiler Gauges
Pressure gauges, water level gauge glasses and combination tridicators used to monitor boiler operating conditions and maintain code-required visual indication. Search by pressure range and gauge type, or describe the boiler system and let ChatMRO match the gauge.
Browse →Bollard Covers and Post Sleeves
Bollard covers and post sleeves slip over existing steel bollards and posts to add impact absorption, high-visibility color, or a decorative finish without replacing the underlying post. Search by post diameter and material, or describe the application and ChatMRO matches the right cover.
Browse →Bolt Assortments
Multi-size, multi-grade bolt kits organized in bins or cases for shops and maintenance departments that need a range of common sizes on hand without ordering each one individually. Search by thread standard, grade and piece count, or describe your typical fastening needs and let ChatMRO match the assortment.
Browse →Bolt Caps
Snap-on plastic bolt and nut caps that cover exposed hex heads and nuts for safety, tamper resistance and finished appearance, sized to standard hex bolt and nut dimensions. Search by hex size and color, or describe the bolt size you're covering and let ChatMRO match the right cap.
Browse →Bolt Cutters
Center-cut, clipper-cut and angled-jaw bolt cutters for cutting bolts, chain, wire rope and padlock shackles, sized by handle length and rated cutting capacity. Search by material and diameter being cut, or describe the job and let ChatMRO match the right cutter.
Browse →Bolt On Miniature Circuit Breakers
Bolt On Miniature Circuit Breakers, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Boltless Shelving
Rivet-style boltless shelving units for warehouse and stockroom storage, sized by shelf load capacity, unit height/width/depth and beam/panel style, assembled without nuts and bolts using interlocking rivet connections. Search by load capacity or describe the storage need and let ChatMRO match the unit.
Browse →Bonnets and Pads
Carpet bonnets and floor machine pads used with rotary buffers for bonnet cleaning, spray buffing, stripping and polishing hard and soft floor surfaces. Search by fiber type and machine size, or describe the flooring and cleaning task and let ChatMRO match the pad.
Browse →Booster Pumps and Systems
Centrifugal and multi-stage pump systems that raise water pressure to a target delivery pressure, sized by flow rate, boost differential and construction material. Search by flow rate and application, or describe the pressure problem and let ChatMRO match the right system.
Browse →Boring Bars
Single-point cutting tools that enlarge and finish existing bored or drilled holes on a lathe or boring mill, selected primarily by shank diameter-to-overhang ratio to control chatter and deflection. Search by shank material, minimum bore diameter, or insert-style vs. brazed-tip construction.
Browse →Bottle Caps
Screw caps and closures for lab, chemical and packaging bottles, in GL and continuous-thread finishes with PTFE-lined, foam or tamper-evident seals. Search by thread finish and material, or describe the bottle and contents you're capping.
Browse →Bottle Jacks
Hydraulic bottle jacks for vertical lifting of vehicles and equipment, indexed by lifting capacity, ram travel and collapsed/extended height. Search by capacity and lift height, or describe the lifting task and let ChatMRO match the jack.
Browse →Bottled Water Dispensers
Freestanding and tabletop bottled water dispensers in hot/cold, cold-only and top-load/bottom-load configurations for offices, break rooms and facilities. Search by cooling type, bottle position or output capacity, or describe the setting and let ChatMRO match the right dispenser.
Browse →Bottles & Jars
Glass and plastic bottles and jars for lab reagents, chemical storage, and general industrial packaging, sized by volume and rated by cap closure and chemical compatibility. Search by material and volume, or describe the contents and let ChatMRO match the container.
Browse →Box Nails
Thin-shank box nails for general carpentry and light framing, sized from 2d to 40d with a thinner shank diameter than common nails to reduce wood splitting. Search by length, gauge and coating type.
Browse →Box, I-Beam and Torpedo Levels
Box-frame, I-beam and torpedo spirit levels in aluminum and composite construction, sized by length and vial count, for checking plumb, level and 45-degree references. Search by length and frame style, or describe the surface and precision needed and let ChatMRO match the level.
Browse →Brake and Clutch Accessories
Bleeder valve kits, return springs, hardware kits and slave/master cylinder accessories for brake and clutch systems across automotive, heavy truck and industrial equipment. Search by component type and application, or describe the repair job.
Browse →Brake Drum Dolly
Heavy duty rolling dollies with contoured cradles for safely transporting truck and heavy equipment brake drums, wheel assemblies and similar round heavy components. Search by load capacity and cradle size, or describe the component being moved and let ChatMRO match the dolly.
Browse →Brake Motors
Brake motors combine an AC induction motor with an integrated, spring-set electromagnetic brake that engages automatically on power loss, holding a load without drift. Search by horsepower, brake torque, and frame size, or describe the load-holding application and let ChatMRO match the right motor.
Browse →Brake Tools
Specialty tools for brake service: caliper piston compressors, brake bleeders, rotor micrometers and drum spring tools for automotive and heavy-duty vehicle maintenance. Search by tool function, or describe the brake job you're doing.
Browse →Brakes and Clutches
Electromagnetic, friction disc and pneumatic brakes and clutches for power transmission, sized by dynamic and static torque rating rather than horsepower alone. Search by torque requirement and shaft configuration and let ChatMRO match a unit to your drive.
Browse →Brass Air Brake Connectors and Accessories
DOT-compliant brass push-to-connect and compression fittings for heavy-duty vehicle air brake, suspension and accessory air lines, sized by tube OD and NPTF thread. Search by fitting style and tube size, or describe the air line connection and let ChatMRO match the right fitting.
Browse →Brass Blanks, Flats, Bars, Plates And Sheet Stock
Brass bar, flat, plate and sheet stock in free-machining C360 and cartridge C260 alloys, sized by thickness, width and length for machining and fabrication. Search by alloy, form and dimension and let ChatMRO match the right stock.
Browse →Brass Pipe
Red and yellow brass pipe in standard NPT sizes and schedules for plumbing, fuel, and low-pressure hydraulic and pneumatic lines. Search by alloy, size and schedule, or describe the media and pressure and let ChatMRO match the pipe.
Browse →Brass Pipe Fittings
Threaded, compression and flare brass pipe fittings for water, gas and pneumatic lines. Search by fitting type and thread size, or describe the piping system and let ChatMRO match the fitting.
Browse →Brass Tubing
Round brass tube in C260 cartridge brass and C360 free-machining alloy, sold in seamless and welded construction across standard OD and wall combinations. Search by alloy, dimensions and temper, or describe the application and let ChatMRO match the right stock.
Browse →Brazing Alloys
Silver, copper-phosphorus, nickel and aluminum-silicon filler alloys for brazing joints on copper, steel, cast iron and dissimilar metals, sized by AWS classification and form (rod, wire, paste, ring). Search by base metal and joint application.
Browse →Breathing Air Cylinder Carts
Breathing air cylinder carts use welded steel or aluminum frames with chained restraints and pneumatic wheels to move heavy SCBA and cascade cylinders across job sites without manual carrying or rolling risk.
Browse →Bronze Blanks, Flats, Bars, Plates and Sheet Stock
Bearing bronze, aluminum bronze and phosphor bronze in bar, flat, plate and sheet form for bushings, wear plates and machined bronze components. Search by alloy (C93200, C95400, C51000) and stock dimension, or describe the wear application.
Browse →Brush Cutters and Field Trimmers
Handheld and walk-behind brush cutters and field trimmers in gas, battery-electric and tractor-PTO configurations, sized by engine displacement and blade/cutting-head compatibility. Search by power source and cutting swath, or describe the vegetation you're clearing.
Browse →Brushless Blowers
Brushless DC (BLDC) motor blowers delivering cooling or process airflow without carbon brushes to wear or replace, sized by CFM output and static pressure. Search by voltage and airflow requirement, or describe the application and let ChatMRO match the blower.
Browse →Brushless ECM Motors
Electronically commutated motors (ECM) that use built-in electronics to control commutation and speed digitally, delivering higher efficiency than PSC motors across the full speed range in HVAC blower and fan applications. Search by horsepower and application, or describe the equipment being replaced and let ChatMRO match the right motor.
Browse →Buck Boost Transformers
Single and three-phase buck-boost transformers for correcting voltage mismatches between supply and equipment, wired to either buck (reduce) or boost (raise) line voltage by a fixed percentage. Search by kVA rating and voltage correction range, or describe the supply and load voltages you're reconciling.
Browse →Bucket Bags and Tool Organizers
Bucket bags and tool organizers wrap a standard 5-gallon bucket in multiple exterior pockets and a rigid or semi-rigid base, giving technicians a mobile, load-rated alternative to a hard toolbox.
Browse →Buckets and Pails
Injection-molded HDPE and steel pails from 1 to 6 gallon, with snap-on, screw-top or wire-bail lid options, in open-head and tight-head styles. Search by capacity, material and UN rating, or describe what you're storing and let ChatMRO match the pail.
Browse →Buffing Wheels
Cotton, sisal, felt and canvas buffing wheels for cutting, coloring and final-finish polishing on bench grinders, buffers and flexible-shaft tools. Search by wheel material, ply count and arbor bore, or describe the finish you need and let ChatMRO match the wheel and compound.
Browse →Building Automation Control Accessories
Sensors, damper actuators, thermostats and interface accessories that support BACnet, Modbus and proprietary building automation systems for HVAC, lighting and access control. Search by protocol, function or controller compatibility.
Browse →Building Automation Controls
DDC controllers, sensors and actuators for building management systems governing HVAC, lighting and energy control. Search by communication protocol (BACnet, Modbus, LonWorks), control point type and application.
Browse →Building Cable
Insulated conductors and jacketed cable rated for fixed wiring inside commercial and residential structures, sized by AWG and rated by insulation type and voltage. Search by gauge, conductor material and insulation rating, or describe the circuit you're wiring.
Browse →Built-In Locker Locks
Recessed built-in locks for lockers, in combination-dial and key-cylinder styles, sized to standard locker door cutouts and keying schemes. Search by lock type and keying option, or describe your locker brand and door thickness and let ChatMRO match the lock.
Browse →Bulk Containers
IBC totes, rigid bulk bins and collapsible bulk containers for storing and transporting liquids, powders and bulk solids, in capacities from 250 to 3,000+ liters with steel cage or self-supporting plastic construction. Search by capacity and material, or describe the contents and handling method.
Browse →Bulk Storage Lockers
Oversized locker systems for storing bulky items — luggage, sporting equipment, bins and tools — beyond the capacity of standard personal lockers, in welded steel or wire mesh construction. Search by compartment size and material, or describe the storage need and let ChatMRO match the right locker system.
Browse →Bulk Storage Racks
Selective, drive-in and push-back pallet racking for warehouse bulk storage, indexed by beam capacity, upright height and bay configuration. Search by pallet load and rack height, or describe your storage layout and let ChatMRO match the racking.
Browse →Bulkhead Tank Fittings
Threaded and flanged fittings that create a sealed, leak-proof penetration through a tank wall for piping, sensors or drain connections. Search by port size and material, or describe your tank and media and let ChatMRO match the right fitting.
Browse →Bump Caps
Lightweight protective bump caps with rigid ABS or polyethylene shell inserts worn under a soft cap or baseball-style shell, specified for low-impact head bump protection rather than falling-object hazards. Search by shell style or describe the work environment and let ChatMRO match the cap.
Browse →Buna-N Rolls
Nitrile (Buna-N) rubber sheet stock supplied in rolls, offering strong resistance to petroleum oils, fuels and hydraulic fluids for gasketing, lining and general fabrication. Search by thickness and width, or describe the fluid contact and sealing application.
Browse →Bunsen Burners
Natural gas and propane laboratory Bunsen burners with adjustable air/gas mixing collars, specified by gas type, base stability and flame control mechanism. Search by gas supply type or describe the lab application and let ChatMRO match the burner.
Browse →Bus Plugs
Plug-in bus plugs that tap power from an overhead busway run to feed branch circuits, sized by amperage and matched to specific busway system brands. Search by amperage and pole configuration, or describe your busway system and let ChatMRO match the right plug.
Browse →Butane Torches
Refillable butane micro torches and soldering torches producing a focused, adjustable flame for brazing, soldering, plumbing and jewelry work. Search by flame temperature, burn time and tip configuration.
Browse →Butterfly Valves
Lug and wafer style butterfly valves, manual and actuated, for large-diameter flow control. Search by size and body style, or describe the line.
Browse →Bypass Valves
Bypass valves that divert or relieve flow around a pump, filter or system component when a set pressure differential is reached, protecting equipment from overpressure. Search by port size, cracking pressure and body material, or describe the system and let ChatMRO match the valve.
Browse →C-Clamps
Malleable iron and forged steel C-clamps sized by jaw opening and throat depth for holding, clamping and fixturing work. Search by opening size and application and let ChatMRO match the right clamp.
Browse →Cabinet Accessories
Hinges, latches, handles, louvers and gaskets for electrical, industrial and storage cabinet enclosures, specified by material, mounting style and NEMA-compatible sealing. Search by hardware type and let ChatMRO match compatible cabinet accessories.
Browse →Cabinet Catches and Latches
Mechanical and magnetic catches that hold a cabinet, panel or enclosure door closed until manually released, in push, magnetic, roller and elbow catch styles rated by holding force. Search by mechanism and holding force, or describe the door weight and application and let ChatMRO match the catch.
Browse →Cabinet Knobs
Single-point mounted pull hardware for cabinet doors and drawers, in a range of materials, finishes and projection depths. Search by hole spacing, base material and finish.
Browse →Cable & Hose Festoon Systems
C-track (open-C) festoon rail, load-rated trolleys, tow arms and end trucks for guiding cables and hoses along a moving crane, hoist or gantry runway. Search by track profile, trolley capacity and system travel length, or describe the runway and let ChatMRO match the components.
Browse →Cable and Hose Carrier Systems
Articulated plastic and steel energy chains (drag chains) that guide and protect cables, hoses, and pneumatic lines along a moving machine axis, sized by interior cross-section and minimum bend radius to match the specific travel and cable bundle. Search by chain size and bend radius, or describe the axis travel and cable bundle and let ChatMRO match the carrier.
Browse →Cable and Wire Crimping Tools
Ratcheting hand crimpers, hydraulic crimpers and battery-powered crimping tools sized to terminal type and cable gauge, for insulated, non-insulated and lug-style connections. Search by die type and cable range, or describe the terminal and let ChatMRO match the crimper.
Browse →Cable And Wire Cutters
Ratchet, compound-action and bolt-rated cutters sized to cable diameter and conductor material, from fine copper wire up to armored and ACSR cable. Search by max cut capacity and handle mechanism, or describe the cable you're cutting.
Browse →Cable Bit Accessories
Attachments and wear parts for cable-tool (percussion) drilling rigs, including bailers, drilling jars, sinker bars and bit sharpening accessories. Search by connection thread size and rig manufacturer compatibility.
Browse →Cable Clips
Adhesive-backed, nail-in, screw-mount and P-clip cable clips for securing and routing wire and cable to walls, studs and equipment, sized by cable diameter. Search by mounting method and cable size, or describe the run you're routing.
Browse →Cable Connectors
Cable connectors and cord grips for terminating electrical cable into enclosures, conduit and equipment, in liquid-tight, armored cable and cord grip styles. Search by cable diameter and connector type, or describe the enclosure and cable and let ChatMRO match the connector.
Browse →Cable Cutters
Ratcheting, hydraulic and manual cable cutters sized for electrical wire, ACSR conductor and wire rope up to large diameters. Search by cable type, maximum cutting diameter and mechanism.
Browse →Cable Height Meters
Non-contact instruments used to measure the height of overhead power lines, cables and conductors above ground or above roadways, using laser or ultrasonic ranging methods. Search by measurement method and range, or describe the clearance verification application.
Browse →Cable Hoists and Ratchet Pullers
Manual come-along style pullers and cable hoists that use a ratcheting lever mechanism to pull or lift loads via a wire rope. Search by rated load capacity, cable length and hook configuration.
Browse →Cable Lockouts
Adjustable cable devices threaded through multiple isolation points to lock out equipment with several energy sources or unusual geometry, as part of a lockout/tagout program. Search by cable length and number of padlock points.
Browse →Cable Protection System Components
Conduits, cable glands, grommets and split loom components that shield electrical and data cables from abrasion, moisture and crushing along their routed path. Search by conduit material, IP rating and cable diameter range.
Browse →Cable Protectors
Floor-mounted ramps and covers that shield cables and hoses from foot and vehicle traffic while reducing trip hazards, rated by channel count and crush load. Search by channel configuration, load rating and indoor/outdoor use.
Browse →Cable Pull Switch Accessories
Wire rope, eye bolts, turnbuckles, cable guides and end fittings used to install and maintain conveyor emergency-stop pull-cord switches. Search by component type, or describe your conveyor length and let ChatMRO match the parts.
Browse →Cable Pullers
Come-along (hand ratchet), hydraulic and powered cable pullers for pulling wire, cable and conductor through conduit and overhead runs. Search by pulling capacity and cable diameter, or describe the pull you're planning.
Browse →Cable Pulling Grip Kits
Cable pulling grip kits use woven wire mesh sleeves that tighten around a cable or conductor under tension, distributing pull force evenly along the jacket rather than concentrating it at a single point. Search by cable diameter range and pulling capacity, or describe the pull and ChatMRO matches the right kit.
Browse →Cable Pulling Jaw Grips
Wire mesh or split-jaw grips that clamp around a cable or conduit end so pulling tension transfers through the grip's braided mesh rather than a fastened or knotted attachment. Search by cable diameter range and rated pulling capacity, or describe the pull application and let ChatMRO match the grip.
Browse →Cable Reels
Retractable and hand-crank cable reels for electrical power, welding cable, air hose and network cable, sized by cable length, gauge and reel drive type. Search by cable type and mounting style, or describe the application and let ChatMRO match the right reel.
Browse →Cable Staples
Insulated and non-insulated cable staples for securing electrical wire, coaxial cable and low-voltage cable to wood, masonry and metal framing, sized to match cable diameter and fastening surface. Search by cable type and surface, or describe the wiring job and let ChatMRO match the right staple.
Browse →Cable Support Grips
Woven wire mesh grips (Kellems-style) that support vertical cable runs and relieve strain at termination points, sized by cable outside diameter and mesh material. Search by cable OD and mounting style, or describe the vertical riser or termination job.
Browse →Cable Swaging Tools
Cable swaging tools compress metal sleeves onto wire rope ends to form loops, terminations and stops, in hand-lever, hydraulic and mechanical press styles. Search by cable diameter range and sleeve type, or describe the wire rope work and ChatMRO matches the right tool.
Browse →Cable Tie Tools
Manual, pneumatic and automatic cable tie tensioning tools that pull a nylon or stainless tie to a set tension and flush-cut the tail in one stroke. Search by tie width, tension range or material and let ChatMRO match the right gun.
Browse →Cable Ties
Nylon 6/6 cable ties specified by length, width and rated tensile strength rather than treated as an interchangeable commodity, with UV-stabilized versions for outdoor use. Search by bundle diameter and required strength and let ChatMRO match a tie.
Browse →Cable, Wire and Hose Clamps
Worm gear, cushioned and wire rope clamps for securing hoses, cables and conduit, sized by clamping diameter range and band material. Search by hose/cable diameter and application environment, or describe the job and let ChatMRO match the right clamp.
Browse →Cables, Cable Locks and U-Locks
Braided steel security cables, integrated cable locks and hardened-steel U-locks in keyed and combination styles, sized by cable diameter and shackle clearance for equipment, gate and asset security applications. Search by cable length, shackle width or lock mechanism.
Browse →Calibration Weights
Precision test weights and weight sets used to calibrate and verify scales and balances, in ASTM and OIML accuracy classes. Search by class, mass value or material, or describe the scale being calibrated and let ChatMRO match the weight.
Browse →Caliper Accessories
Replacement jaws, protective cases, calibration standards and battery/display parts for vernier, dial and digital calipers. Search by caliper type and accessory function.
Browse →Cam and Groove Fittings
Quick-connect hose couplings that lock and seal with a quarter-turn cam lever action, in the standard Type A through Type F configurations across aluminum, stainless steel and polypropylene, for transferring liquids, powders and slurries. Search by type letter, size and material, or describe the fluid and hose ends and let ChatMRO match the right fitting.
Browse →Cam and Groove Gaskets
Replacement seal gaskets for cam and groove (cam lock) quick-connect couplings, in Buna-N, EPDM, PTFE, silicone and Viton materials sized to standard coupling diameters. Search by coupling size and fluid compatibility, or describe the transfer application.
Browse →Cam Followers and Track Rollers
Stud-type and yoke-type cam followers and track rollers combining a heavy-duty outer race with a precision-ground stud for guiding cams, tracks and linear motion systems under radial and combined loads. Search by stud diameter and roller OD, or describe the application and let ChatMRO match the follower.
Browse →Can Openers
Manual, electric and heavy-duty commercial can openers sized to the can diameters and daily volume of a food service or industrial kitchen. Search by drive type, mounting style and maximum can size, or describe the kitchen's volume and let ChatMRO match the right opener.
Browse →Cap Nails
Plastic or metal cap nails combining a nail shank with a wide flat cap to fasten housewrap, roofing felt and rigid insulation without tearing through the material. Search by shank length, cap diameter and shank material, or describe the substrate and let ChatMRO match the nail.
Browse →Capacitor Testers
Handheld and bench meters that measure capacitance, equivalent series resistance (ESR), and leakage current on electrolytic, film, and ceramic capacitors, both out-of-circuit and in-circuit, used to identify degraded capacitors that a capacitance-only reading would miss. Search by measurement type and capacitance range, or describe the capacitor type and troubleshooting need and let ChatMRO match the tester.
Browse →Captive Nuts
Clinch, weld, self-clinching and floating captive nuts that stay permanently retained in sheet metal or panels, sized by thread size and panel thickness range. Search by mounting type and thread size, or describe the panel material and thickness and let ChatMRO match the nut.
Browse →Captive Panel Screws
Spring-loaded and floating captive panel screws that stay attached to an access panel when loosened, preventing dropped hardware inside electronic enclosures and equipment covers. Search by thread size, panel thickness and drive style.
Browse →Car Dollies
Wheel dollies and tow dollies for repositioning or transporting vehicles, from shop-floor wheel dollies rated by axle weight to trailered tow dollies for two-wheel towing. Search by load capacity or dolly type, or describe the vehicle you're moving.
Browse →Carbide Bur Sets
Solid carbide rotary burs for die grinders and rotary tools, sized by head shape, cut style and shank diameter for deburring, weld dressing and precision metal removal. Search by shape and cut type, or describe the material and finishing task and let ChatMRO match the bur set.
Browse →Carbide Drill Bits
Solid carbide and carbide-tipped drill bits for hardened steel, cast iron and abrasive material. Search by diameter and coating, or describe the material you are drilling.
Browse →Carbide End Mills
Solid carbide end mills in square, ball nose and corner radius geometries. Search by diameter and flute count, or describe the material and finish you need.
Browse →Carbide Tipped Drill Bits
Carbide-tipped drill bits for masonry, metal and abrasive materials, in straight and SDS shank configurations with brazed tungsten carbide tips. Search by material application and diameter, or describe the substrate you're drilling.
Browse →Carbon Monoxide and Smoke Detectors
Standalone and combination alarms that detect carbon monoxide buildup, smoke particulates, or both, and provide early warning per UL 2034 and UL 217 requirements. Search by sensor type, power source and mounting, or describe your facility and let ChatMRO match the right detector.
Browse →Carbon Steel Ball Stock
Precision-ground and commercial-grade carbon steel balls used in bearings, check valves, detents and mechanical assemblies, sized by diameter and classified by AFBMA grade for sphericity and surface finish. Search by diameter and grade, or describe the application and let ChatMRO match the ball stock.
Browse →Carbon Steel Rod Stock
Round bar rod stock in low, medium and high carbon steel grades, hot rolled or cold finished, for machining, fabrication and structural applications. Search by grade and diameter, or describe your application and let ChatMRO match the right stock.
Browse →Carbonator Pump Motors
Replacement electric motors for beverage carbonator pumps used in soda fountain and post-mix dispensing systems, matched to pump mounting pattern and voltage. Search by voltage and mounting style, or describe your carbonator pump and let ChatMRO match the motor.
Browse →Carboys and Jerricans
Rigid plastic containers for storing and transporting liquids, from lab-scale HDPE carboys to UN-rated jerricans certified for regulated hazardous material shipping. Search by capacity, material or UN rating requirement, or describe the liquid being stored or shipped.
Browse →Cargo Bars & Hoops
Adjustable cargo bars and E-track hoops for securing and separating loads inside trucks, cargo vans and trailers. Search by expansion range and load capacity, or describe the cargo compartment you're securing.
Browse →Cargo Straps
Ratchet and cam buckle cargo straps for securing loads during transport, rated by working load limit (WLL) and break strength per DOT and WSTDA standards. Search by strap width, length and end fitting, or describe the load being secured.
Browse →Carpenter's and Mechanic's Pencils
Flat carpenter's pencils and round mechanic's marking pencils in graphite and colored lead, sized for rough lumber layout and precision metal marking. Search by lead grade and shape, or describe the surface you need to mark.
Browse →Carpet Tile
Modular carpet squares for commercial flooring, installed with peel-and-stick, pressure-sensitive adhesive, or tackifier methods for easy replacement of individual damaged tiles. Search by tile size, backing type, or pile construction.
Browse →Carriage Bolts
Round-head, square-neck carriage bolts that self-lock against rotation when tightened into wood or a matching square hole, in Grade 2, Grade 5, 18-8 stainless and hot-dip galvanized finishes. Search by diameter, length and material, or describe the joint and let ChatMRO match the right bolt.
Browse →Carton Staples
Wire staples for carton sealing, stitching and case closing machines, in a range of crown widths and leg lengths matched to specific stitcher and stapler models. Search by gauge and leg length, or describe your stitching machine and let ChatMRO match the staples.
Browse →Cartridge Heaters
Cylindrical electric resistance heaters that insert into drilled holes in metal parts to provide localized, high-density heat for molds, dies and process equipment. Search by diameter, length and watt density, or describe the application and let ChatMRO match the heater.
Browse →Cast Iron Rod Stock
Continuous-cast gray and ductile iron round rod stock for machined parts requiring good vibration damping and wear resistance, sold by diameter and grade. Search by grade and diameter, or describe the part you're machining and let ChatMRO match the right stock.
Browse →Caster Accessories
Replacement and add-on hardware for industrial and institutional casters — wheel locks, swivel locks, mounting plates, kingpins and brake kits — that extend caster service life or add functionality to an existing wheel assembly. Search by component type and caster compatibility, or describe the caster you're servicing and let ChatMRO match the right accessory.
Browse →Caster Sockets, Brackets and Floor Locks
Mounting hardware — sockets, brackets and floor locks — for installing and securing casters on carts, equipment and workstations. Search by stem size, bolt pattern or floor lock mechanism, or describe the cart application and let ChatMRO match the hardware.
Browse →Caster Wheels
Rigid and swivel casters in rubber, polyurethane and steel wheel materials, with optional locking. Search by load rating and mount, or describe the cart or equipment.
Browse →Caulk Guns
Manual ratchet, battery-powered and pneumatic caulk guns sized for standard 10 oz and 29 oz cartridges, for sealant, adhesive and caulk dispensing across construction and industrial use. Search by drive mechanism and cartridge size, or describe the material being dispensed and let ChatMRO match the gun.
Browse →CB Radios
Mobile and base station 40-channel citizens band (CB) radios for fleet, off-road and trucking communication, sized by power output, SSB capability and mounting configuration. Search by channel features and mounting type, or describe the vehicle and let ChatMRO match the right radio.
Browse →Ceiling Exhaust Ventilators
Ceiling-mounted exhaust ventilators sized by CFM and sone (noise) rating, for bathroom, utility room and light commercial exhaust ventilation, with round duct outlets from 3 to 6 inches. Search by CFM and noise level, or describe the room size and let ChatMRO match the fan.
Browse →Ceiling Fans
Standard, commercial and HVLS (high-volume low-speed) ceiling fans rated by blade span and airflow (CFM), for comfort cooling and industrial air circulation across warehouse, commercial and residential-scale spaces. Search by blade span and mounting height, or describe the space you're cooling and let ChatMRO match the fan.
Browse →Ceiling Tiles
Mineral fiber, fiberglass and metal drop ceiling tiles sized to standard 2x2 ft and 2x4 ft grid systems, rated by acoustic performance (NRC) and fire resistance. Search by size and NRC rating, or describe the room and let ChatMRO match the tile.
Browse →Cell Phone Lockers
Multi-door cell phone and personal device storage lockers with optional built-in charging, for workplaces, schools and secure facilities. Search by door/compartment count and locking style, or describe your facility's device storage need.
Browse →Center Punches
Manual, spring-loaded automatic and transfer center punches for marking drill and layout points on metal, wood and plastic. Search by punch type and point angle, or describe the layout task and let ChatMRO match the punch.
Browse →Centrifugal Magnetic Finishing Machines
Rotating magnetic-field deburring and polishing systems that spin small steel media pins around parts in a non-abrasive chamber, reaching internal passages and fine features that vibratory or tumbling media cannot. Search by chamber size, media pin length and typical cycle time.
Browse →Centrifuge Tubes
Conical and round-bottom centrifuge tubes in polypropylene and polycarbonate, rated for specific maximum relative centrifugal force (RCF). Search by volume, cap style and rotor compatibility, or describe the sample and spin speed and let ChatMRO match the right tube.
Browse →Ceramic Fiber Insulation
Lightweight refractory fiber insulation rated for continuous high-temperature service, available as blanket, board, paper and moldable forms, used to line furnaces, kilns and high-temperature equipment. Search by form and temperature rating, or describe the application temperature and let ChatMRO match the material.
Browse →Chain and Belt Tensioners
Spring-loaded and manually adjustable tensioners for roller chain and belt drives, in slider, sprocket-idler and pulley-idler configurations. Search by drive type and adjustment method, or describe the drive layout and let ChatMRO match the tensioner.
Browse →Chain and Cable Hooks
Grab, slip, sling and swivel hooks rated for chain and wire rope rigging, lifting and tie-down applications, sized to match specific chain grade and cable diameter. Search by hook type, working load limit and chain/cable size, or describe the rigging application.
Browse →Chain Containers
Steel and heavy-duty poly chain containers for bulk lifting and load chain storage with center-feed dispensing, keeping chain tangle-free and off the floor. Search by capacity, chain size and dispensing configuration.
Browse →Chain Couplings
Double-hub roller chain couplings that connect misaligned shafts using a common roller chain engaging sprocket-toothed hubs, sized by chain pitch and bore diameter. Search by chain size and bore, or describe the shafts and horsepower you're coupling.
Browse →Chain Links
Master links, cam-lock (Cottrell-style) and cotter-pin connecting links for repairing or joining roller and welded chain, sized to ANSI and ISO chain pitch. Search by chain number and working load limit, or describe your chain and let ChatMRO match the right link.
Browse →Chain Saw and Protective Chaps
Cut-resistant chaps built with layered ballistic fabric that jams a chainsaw's drive sprocket on contact, sized by wrap style and leg length for forestry, arborist and landscaping use. Search by ASTM/OSHA cut-resistance class and closure type, or describe your chainsaw use case.
Browse →Chain Slings
Grade 80 and Grade 100 alloy chain slings in single, double, triple and quad-leg configurations for overhead lifting and rigging. Search by working load limit, chain size and leg count.
Browse →Chain Wrenches and Tongs
Chain-type pipe wrenches and strap tongs that grip round pipe, tube and cylindrical stock via a wrapped chain or strap rather than fixed jaws, sized by maximum pipe diameter capacity. Search by pipe size and jaw style, or describe the stock being turned and let ChatMRO match the right wrench.
Browse →Chalk Line Reels
Chalk line reels for snapping straight reference lines on framing, drywall, roofing and concrete layout work, with line lengths and case durability suited to job-site vs. finish carpentry use. Search by line length and case material, or describe your layout task and let ChatMRO match the right reel.
Browse →Chart Recorder Pens
Replacement pens for strip chart and circular chart recorders, in fiber-tip, capillary and refillable ink cartridge styles matched to the recorder manufacturer and model. Search by pen color and instrument brand, or describe the recorder and let ChatMRO match the pen.
Browse →Chartless Digital Recorder Accessories
Input modules, probes, communication cards and analysis software that extend and support paperless (chartless) digital data recorders used for temperature, pressure and process monitoring. Search by accessory type and compatible recorder model, or describe the recorder and application.
Browse →Check and Foot Valves
Check valves preventing reverse flow and foot valves maintaining pump prime on suction lines, sized by connection size, cracking pressure and body material. Search by pipe size and application, or describe the flow direction problem and let ChatMRO match the right valve.
Browse →Chemical Metering Pumps
Diaphragm, peristaltic and solenoid-driven metering pumps for precise chemical dosing in water treatment, process and industrial applications, in PVC, PVDF and stainless wetted materials. Search by flow rate and chemical compatibility, or describe the dosing application and let ChatMRO match the pump.
Browse →Chemical Neutralizers
Powdered, granular and liquid neutralizing agents that react with spilled acids, bases or other hazardous chemicals to bring them to a safer pH before cleanup and disposal. Search by chemical class and container size, or describe the spill hazard and let ChatMRO match the right neutralizer.
Browse →Chemical Resistant and Disposable Aprons
PVC, neoprene, rubber and disposable polyethylene aprons for protecting against chemical splash, acids, and biological contamination, in bib and full-coverage lengths. Search by material, length and the chemical or process being handled.
Browse →Chemical Resistant and Disposable Coveralls
Limited-use and disposable coveralls in Tyvek, SMS and laminated fabrics, rated by chemical permeation resistance and particulate protection level for hazardous material handling and contamination control. Search by fabric type and protection level, or describe the hazard and let ChatMRO match the suit.
Browse →Chemical Resistant and Disposable Sleeves
Disposable and reusable arm sleeves protecting against chemical splash, abrasion and contamination during handling and processing tasks, sized by material, length and closure type. Search by chemical resistance, length or material and let ChatMRO match the right sleeve.
Browse →Chemical Resistant Gloves
Nitrile, neoprene, butyl rubber and PVC gloves rated for breakthrough time against specific solvents, acids and caustics, not just generic "chemical resistant" labeling. Search by the chemical you're handling and let ChatMRO match a glove with a documented permeation rating.
Browse →Chemical Transfer Magnetic Drive Pumps
Sealless magnetic drive centrifugal pumps for transferring acids, caustics and corrosive process chemicals, specified by flow rate, head and wetted material chemical compatibility. Search by fluid type and flow requirement and let ChatMRO match a compatible pump.
Browse →Chop Saws and Cut-Off Machines
Abrasive chop saws and cold saw cut-off machines for cutting metal bar, tube, angle and structural stock to length, rated by blade diameter, motor horsepower and material cutting capacity. Search by cut capacity or blade type, or describe the material and section size and let ChatMRO match the machine.
Browse →Chuck Keys and Holders
Gear-style and T-handle chuck keys sized to match drill chuck pilot and gear diameters, plus magnetic and cord-mounted holders that keep the key attached to the machine. Search by chuck size and key style, or describe the machine you're keying.
Browse →Chucking Reamers
Straight and taper shank chucking reamers in high-speed steel and carbide for precision hole sizing. Search by diameter and tolerance, or describe the finish you need.
Browse →Chute Hoppers
Transfer and loading chute hoppers that direct bulk material flow between conveyors, bins and processing equipment, sized by volume capacity and discharge configuration. Search by capacity and material, or describe your transfer point and let ChatMRO match the hopper.
Browse →Circuit Breaker Accessories
Add-on modules that extend a molded case circuit breaker's function beyond basic overcurrent protection — shunt trip and undervoltage release units, auxiliary and alarm switches, and lockout/tagout devices — matched to a specific breaker frame and manufacturer. Search by function and breaker compatibility, or describe the breaker and application and let ChatMRO match the right accessory.
Browse →Circuit Breaker Enclosures
NEMA-rated steel and non-metallic enclosures for circuit breaker panels and load centers, specified by enclosure type, breaker space capacity and mounting configuration. Search by NEMA rating and panel size and let ChatMRO match the box.
Browse →Circuit Breaker Lockouts
Circuit breaker lockout devices for single-pole, multi-pole and molded-case breakers, compatible with standard residential, commercial and industrial panel styles, supporting OSHA lockout/tagout (LOTO) compliance programs. Search by breaker type, panel brand or lockout style.
Browse →Circuit Protection Devices
Circuit breakers, fuses, ground fault devices and surge protective devices that interrupt or limit fault current to protect wiring, equipment and personnel. Search by device type, current rating and voltage class, or describe the circuit and let ChatMRO match the right protection device.
Browse →Circuit Testers
Voltage, continuity and outlet circuit testers ranging from simple non-contact pens to plug-in receptacle testers that verify wiring polarity and GFCI trip function. Search by test type and voltage range, or describe what you're checking and let ChatMRO match the right tester.
Browse →Circuit Tracer Accessories
Replacement probes, alligator clamps, amplifier probes and tone generator/receiver kits for tracing energized and de-energized wiring, breakers and cable runs. Search by connector type and tracer brand, or describe the tracer model you're supporting.
Browse →Circuit Tracers
Transmitter-and-receiver tool sets that identify which breaker feeds a given outlet or trace a wire's physical path through walls, used to map unlabeled panels and locate energized or de-energized conductors. Search by tracing distance and signal type, or describe your panel and let ChatMRO match the right tracer.
Browse →Circular Chart Recorders
Mechanical and electronic circular chart recorders that trace a continuous pen record of pressure, temperature, or flow on a rotating round paper chart, in common chart sizes from 6 to 12 inches with clock-driven or electric chart drive mechanisms. Search by chart size and input type, or describe the process variable being recorded and let ChatMRO match the recorder.
Browse →Circular Charts
Paper circular charts sized and ranged to fit specific circular chart recorder models, for temperature, pressure, humidity and flow recording. Search by chart diameter, range and rotation period, or describe the recorder it needs to fit.
Browse →Circular Saw Accessories
Blades, rip fences, edge guides, track systems and dust collection attachments that expand a circular saw's cutting accuracy and application range. Search by accessory type and saw model, or describe what you're cutting and let ChatMRO match the right accessory.
Browse →Circular Saw Blades
Circular Saw Blades, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Circulator Pump Accessories
Flanges, unions, isolation valves, replacement cartridges and control accessories sized to specific circulator pump series and pipe connection size. Search by pump brand/series and connection type, or describe the pump you're servicing.
Browse →Circulator Pumps
Wet-rotor and dry-rotor circulator pumps for hydronic heating, chilled water and domestic hot water recirculation systems. Search by flow rate, head pressure and connection size, or describe the system you're circulating.
Browse →Clamp Accessories
Protective jaw pads, extension bars, swivel heads and replacement spindles and screws that extend the reach and capability of bar, pipe and C-clamps. Search by accessory type and clamp compatibility, or describe the clamping task and let ChatMRO match the accessory.
Browse →Clamp Meters
Clamp-style multimeters that measure current by sensing the magnetic field around a conductor, without breaking the circuit. Search by current range, jaw size and AC/DC capability, or describe the circuit you're testing and let ChatMRO match the right meter.
Browse →Clamp Sets
Multi-piece clamp sets spanning bar, spring, F-style and pipe clamps in graduated sizes for woodworking, fabrication and general assembly. Search by clamp type and size range and let ChatMRO match the right set.
Browse →Clamping Kits
T-slot clamping kits with step blocks, studs, clamps and nuts sized to standard mill, drill press and fixture table T-slot widths. Search by T-slot size and clamp style, or describe the workholding setup you're building.
Browse →Clamping Tools
Toggle, C-clamps, strap clamps and pneumatic clamps for workholding, fixturing and assembly. Search by holding force and mounting style, or describe the workpiece and let ChatMRO match the clamp.
Browse →Clamps and Fasteners
Hose, pipe, cable and structural clamps in stainless and plated steel, sized by diameter range and band width, for securing hose to fittings and mounting cable, conduit and pipe runs. Search by clamp type and diameter range, or describe what's being clamped and let ChatMRO match the fastener.
Browse →Class 2 Transformers
UL 1310/1585-listed step-down transformers whose secondary is current-limited so the output circuit is treated as inherently safe low-voltage wiring under the NEC. Search by primary voltage, VA rating and enclosure style, or describe the load and let ChatMRO match a compliant unit.
Browse →Class CC Fuses
UL Class CC fast-acting and time-delay branch-circuit fuses in the compact 13/32 x 1-1/2 inch body size, rated up to 600V and 30A, used for motor control circuit and branch circuit protection in a rejection-style fuse holder. Search by amp rating and time-delay type, or describe the circuit you're protecting and let ChatMRO match the right fuse.
Browse →Class G Fuses
UL Class G current-limiting fuses in 1/2 to 60A ratings, sized specifically for branch circuit protection in HVAC, lighting and control panels where enclosure space is limited. Search by amperage and case size, or describe the panel and let ChatMRO match the fuse.
Browse →Class J Fuses
UL 248-8 Class J fast-acting, current-limiting fuses rated to 600V, used where high interrupting capacity and compact size are required. Search by amp rating and voltage, or describe the circuit and let ChatMRO match the fuse.
Browse →Class T Fuses
UL Class T fuses are fast-acting, current-limiting fuses in a compact physical size, commonly specified where panel space is limited but high interrupt rating and low peak let-through current are still required. Search by ampere rating, voltage class, or 240V/300V/600V body style.
Browse →Claw & Rip Framing Hammers
Curved-claw hammers for nail pulling and finish work, and straight-claw (rip) framing hammers for prying and rough framing, in 16–28 oz head weights with steel, fiberglass or wood handles. Search by head weight and claw style, or describe the framing task.
Browse →Clean Room and Lab Gloves
Nitrile, latex and vinyl gloves rated for cleanroom-class controlled environments and general laboratory use, specified by material, thickness, length and ISO cleanroom classification. Search by material and required cleanroom class and let ChatMRO match compliant gloves.
Browse →Cleaning Dip Tanks
Steel and stainless steel dip tanks for solvent parts cleaning, cold soak degreasing and immersion washing, sized from small bench units to shop-floor capacity. Search by tank capacity and construction material, or describe the parts and solvent you're using.
Browse →Cleanroom Products
ISO-classified cleanroom wipes, garments, gloves and mats engineered for low particulate and fiber shed in controlled environments. Search by ISO class and product type, or describe your cleanroom rating and let ChatMRO match the products.
Browse →Cleanroom Tacky Mats
Layered adhesive peel-off mats that trap particulates and debris from footwear and cart wheels at cleanroom, lab and controlled-environment entryways. Search by mat size, number of peel layers and ISO cleanroom class, or describe the entry point and let ChatMRO match the mat.
Browse →Clevis Pins
Clevis pins are headed, cylindrical pins used to join a clevis or yoke to a mating part, secured with a cotter pin or retaining ring through a cross-drilled hole. Search by diameter, usable length, and material, or describe the clevis assembly and let ChatMRO match the right pin.
Browse →Close Coupled Pump Motors
Electric motors built with a pump-specific shaft extension and mounting face (C-face or JM/JP frame) so the pump impeller mounts directly on the motor shaft with no coupling, baseplate alignment, or separate bearings required. Search by frame size, horsepower and shaft/mounting standard, or describe the pump being paired and let ChatMRO match the motor.
Browse →Coalescing Filter Elements
Coalescing filter elements remove sub-micron oil aerosols, water droplets and particulates from compressed air and gas streams, rated down to 0.01 micron for instrument-quality air. Search by micron rating and housing compatibility, or describe the flow rate and required air quality class.
Browse →Coated Gloves
Palm-coated and fully-dipped work gloves in nitrile, polyurethane, latex and PVC over knit or seamless liners, rated for grip, cut resistance and chemical exposure. Search by coating type and cut level, or describe the task and hazard you need protection from.
Browse →Coating Thickness Gauges
Magnetic induction and eddy current coating thickness gauges for measuring paint, powder coat and plating thickness over ferrous and non-ferrous substrates. Search by substrate type and required accuracy.
Browse →Coaxial Cables
Coaxial cable for video, RF and data signal transmission in RG6, RG59, RG58 and low-loss designations, in single, dual and quad-shield constructions for indoor, outdoor and direct-burial runs. Search by RG type, impedance and shielding, or describe the signal application and let ChatMRO match the right cable.
Browse →Cold Condition Gloves
Insulated leather, waterproof shell and thermal-lined work gloves rated for cold storage, outdoor and freezer environments. Search by temperature rating and grip requirement, or describe the working condition and let ChatMRO match the glove.
Browse →Collapsible Spill Containment Berms and Pools
Fold-flat berms and pools that deploy in minutes to provide temporary secondary containment under drums, IBC totes, vehicles and refueling operations, then collapse for storage or transport. Search by capacity, footprint and liner material.
Browse →Collet Chucks
Precision collet chucks in ER, TG and other collet systems, for holding cutting tools and workpieces on CNC and manual machines. Search by collet system and spindle taper, or describe your machine and let ChatMRO match the chuck.
Browse →Collet Sets
Precision collets that clamp round or shaped stock and cutting tools concentrically in a machine spindle, sold as sets covering a size range within a collet system (ER, 5C, R8 and others). Search by collet system and size range, or describe the machine and tooling and let ChatMRO match the set.
Browse →Colony Counters
Manual pen-style, semi-automatic and digital image-based colony counters for enumerating bacterial and fungal colonies on agar plates in microbiology and quality control labs. Search by counting method and plate size compatibility, or describe your lab's daily plate volume and let ChatMRO match the counter.
Browse →Color Coded Brushes
Food-safe cleaning brushes in standardized colors used to prevent cross-contamination under HACCP and allergen-control programs. Search by color, bristle stiffness and brush style, or describe the cleaning zone and let ChatMRO match the set.
Browse →Combination Grit Sharpening Stones
Two-sided combination sharpening stones pairing a coarse grit face for edge shaping with a fine grit face for honing, in oil stone, water stone and diamond constructions. Search by grit pairing and stone material, or describe the edge you're sharpening.
Browse →Combination Padlocks
Resettable and fixed-combination padlocks with dial or directional-button mechanisms, in brass, steel and weatherproof bodies for lockout/tagout, gate and general security applications. Search by shackle material and combination type, or describe the security application and let ChatMRO match the padlock.
Browse →Combination Square Sets and Components
Combination square sets and individual components — square heads, center heads, protractor heads and graduated steel rules — used for layout, squareness checks and angle measurement in the shop. Search by rule length, head type or graduation, or describe the layout task.
Browse →Combination Wrench Sets
SAE and metric combination wrench sets pairing an open-end and box-end (ring) head of the same size on each wrench, in standard, long-pattern and flex-head configurations. Search by size range and standard, or describe the fastener sizes you need covered.
Browse →Combination Wrenches
Open-end and box-end combined on one wrench body, in SAE and metric sizes. Search by size and finish, or describe the fastener you are turning.
Browse →Combustible Gas Detector Accessories
Replacement sensors, calibration gas cylinders, regulators and sampling accessories for portable and fixed combustible gas detectors, matched to LEL, catalytic bead and infrared sensor technologies. Search by instrument model, gas mix or sensor type.
Browse →Combustible Gas Detectors
Portable and fixed combustible gas detectors using catalytic bead or infrared sensors to monitor percent LEL (lower explosive limit) of flammable gases and vapors in industrial and confined-space environments. Search by sensor type and target gas, or describe the environment and let ChatMRO match the detector.
Browse →Combustion Analyzer Accessories
Replacement probes, filters, sensor cells and calibration accessories for portable combustion gas analyzers used to tune burners and verify emissions on boilers, furnaces and heating equipment. Search by component type and analyzer compatibility, or describe the analyzer model and part you need and let ChatMRO match the right accessory.
Browse →Common Nails
Wire nails with a flat head and thick shank for general framing and construction, sized by penny (d) designation. Search by penny size, shank style (smooth, ring, spiral), or coating (bright, galvanized, vinyl-coated).
Browse →Communication Cables
Twisted-pair copper (Cat5e, Cat6, Cat6a) and fiber optic communication cables for structured data networking, sized by category rating, shielding and jacket rating for the installation environment. Search by category and shielding type, or describe the run and let ChatMRO match the right cable.
Browse →Compact Fluorescent Lamps
Spiral, twin-tube and quad-tube compact fluorescent lamps for retrofit and replacement in existing fixtures, in a range of base types, wattages and color temperatures. Search by base type, wattage and color temperature, or describe the fixture you're relamping.
Browse →Compact Fluorescent Lamps (CFL)
Spiral, twin-tube and quad-tube compact fluorescent lamps in screw-base and pin-base configurations, sized by wattage and color temperature for general and fixture-specific replacement. Search by base type and wattage, or describe the fixture and let ChatMRO match the CFL.
Browse →Compressed Air Filters
Coalescing, particulate and activated-carbon inline filters that remove oil aerosols, dirt and water droplets from compressed air before it reaches tools, instruments or paint lines. Search by micron rating and pipe connection, or describe the air quality class you need.
Browse →Compressed Air Sprayers
Handheld pressurized sprayers using pump-generated or compressed air to atomize and dispense liquids, specified by tank capacity, wetted material and pressure rating. Search by capacity or chemical compatibility, or describe the fluid and let ChatMRO match the sprayer.
Browse →Compression And Die Springs
Round-wire compression springs and rectangular-wire die springs sized by free length, wire/bar diameter and load rating, color-coded by duty class (light, medium, heavy, extra-heavy) for stamping dies and machine applications. Search by bore size, load and duty class, or describe the application.
Browse →Compression Seals
Elastomeric compression seals for pipe penetrations, duct joints and static gasketing, indexed by material, durometer and compression range. Search by application and sealing gap, or describe the joint you're sealing and let ChatMRO match the seal.
Browse →Compression Tube Fittings
Two- and three-piece compression fittings for rigid and semi-rigid tubing, in brass, stainless and plastic. Search by tube size and material, or describe the connection.
Browse →Compressor Air Filters
Intake air filters and inline coalescing filters for reciprocating, rotary screw and rotary vane air compressors, sized to match OEM housings and flow rates. Search by compressor model or micron rating, or describe the compressor and let ChatMRO match the filter.
Browse →Compressor Oil
Synthetic and mineral-based lubricants formulated for rotary screw, reciprocating and rotary vane air compressors, specified by viscosity grade and base oil chemistry to match compressor type and operating temperature. Search by compressor brand/model or viscosity grade, or describe your compressor.
Browse →Concealed Hinges
European-style cup hinges that mount inside the cabinet, hidden from view when the door is closed, adjustable in three dimensions after installation. Search by cup diameter, overlay type (full, half, inset), or opening angle.
Browse →Concrete Chain Saw Chains and Bars
Diamond-segmented chains and reinforced guide bars for concrete chain saws, sized by bar length, chain pitch and diamond bond hardness to match aggregate type. Search by bar length and material being cut, or describe the concrete and let ChatMRO match the right chain and bar.
Browse →Concrete Edgers and Groovers
Hand and walking edgers and groovers used to finish rounded slab edges and cut control joints into fresh concrete before it fully cures. Search by radius and blade depth, or describe the slab finishing task and let ChatMRO match the tool.
Browse →Concrete Miscellaneous Tool Accessories
Handles, blades, edgers, groovers and replacement parts for concrete finishing tools, sized by tool type and application. Search by accessory type, blade material or handle style and let ChatMRO match the right accessory.
Browse →Concrete Miscellaneous Tools
Hand and specialty tools for placing, finishing and edging concrete — trowels, edgers, groovers, floats, screeds and bull floats. Search by tool type and application, or describe the concrete finishing task you're equipping for.
Browse →Concrete Mixer Accessories
Replacement blades, drum liners, chutes, tires and drive components for portable, towable and stationary concrete mixers. Search by part type or mixer brand compatibility, or describe your mixer model and let ChatMRO match the accessory.
Browse →Concrete Mixers
Portable electric, gas-powered and towable drum mixers sized by batch capacity for jobsite concrete, mortar and mix production. Search by drum capacity and power source, or describe the job scale and let ChatMRO match the mixer.
Browse →Concrete Trowels
Hand finishing trowels and gas/electric powered walk-behind and ride-on trowel machines for smoothing and hard-troweling concrete slabs, sized by blade type and coverage area. Search by trowel type and blade style, or describe the slab size and finish and let ChatMRO match the trowel.
Browse →Condensate Drain Pans
Secondary and auxiliary condensate drain pans in galvanized steel, aluminum, and molded plastic, sized to fit specific air handler, furnace, and evaporator coil footprints. Search by material, dimensions and drain fitting size, or describe the equipment and let ChatMRO match a pan.
Browse →Condensate Pumps
Automatic condensate removal pumps for HVAC, refrigeration and steam condensate, sized by maximum discharge head, flow rate and reservoir capacity. Search by application, discharge head or voltage.
Browse →Condensate Return Systems
Packaged condensate return units combining a receiver tank, pump, and float controls to return condensed steam to a boiler feed system. Search by tank capacity and pump configuration, or describe your boiler's steam capacity.
Browse →Condenser Fan Motors
Replacement condenser fan motors for HVAC and refrigeration condensing units, sized by horsepower, RPM, voltage and shaft/mounting configuration. Search by horsepower, RPM or motor frame size.
Browse →Conduit and Cable Hangers
J-hooks, trapeze hangers, clevis hangers, and conduit clamps for supporting electrical conduit, cable tray, and bundled cable runs, sized for 1/2 in through 6 in conduit and rated for various support spacing per NEC. Search by hanger type and conduit size, or describe the run and support interval and let ChatMRO match the hanger.
Browse →Conduit and Outlet Bodies
Cast conduit outlet bodies (LB, LL, LR, T and C types) that provide pull-point access and direction changes in rigid and IMC conduit runs. Search by configuration and hub size, or describe your conduit run and let ChatMRO match the right body.
Browse →Conduit Fittings
Connectors, couplings and adapters for EMT, rigid metal, IMC and liquidtight flexible conduit, in set-screw, compression and threaded styles across standard trade sizes. Search by conduit type and trade size, or describe the run you're installing.
Browse →Conduit Voltage Markers
Self-adhesive bands, wraparound labels and snap-on tags identifying the voltage class carried inside electrical conduit, used to meet code-driven and facility identification standards. Search by voltage class and conduit diameter, or describe your installation and let ChatMRO match the right marker.
Browse →Confined Space Hoist Upper Masts
Upper mast and davit arm sections for confined space entry hoist systems, extending reach over an entry point for personnel retrieval, in fixed and adjustable-offset configurations. Search by reach and load rating, or describe your entry point and let ChatMRO match the mast.
Browse →Confined Space Venturi Blowers
Compressed-air-powered venturi blowers for confined space ventilation, no electrical or motor spark risk. Search by CFM and hose size, or describe the space.
Browse →Conical Washers
Belleville disc spring washers and conical spring washers for preloading, spring loading and load compensation in bolted joints, sized by ID/OD and deflection load. Search by bolt size and load requirement, or describe the application and let ChatMRO match the right washer.
Browse →Connecting and Clevis Links
Grade 43, 70 and 80 connecting links and clevis links for joining or repairing chain, sized to match chain diameter and rated with a specific working load limit. Search by chain size and grade, or describe the application and let ChatMRO match the right link.
Browse →Connector Nuts
Twist-on and threaded connector nuts that join and insulate electrical wire splices or mechanically join rod and pipe, sized by wire gauge range or thread size. Search by wire gauge or thread size, or describe the connection and let ChatMRO match the connector.
Browse →Contactor Accessories
Auxiliary contact blocks, coil replacement modules, mechanical interlocks and timer add-ons that mount to standard contactor frames to extend switching and control functions. Search by compatible contactor brand and frame size, or describe the control function you need to add.
Browse →Continuity Testers
Standalone continuity testers that apply a small test current across a de-energized conductor, fuse or cable to confirm an unbroken electrical path, with audible or visual indication. Search by test type and application, or describe the circuit being checked and let ChatMRO match the tester.
Browse →Control Keys
Replacement keys for keyed selector switches, control panel locks and equipment ignition switches, matched by keyway pattern and switch manufacturer rather than sold as generic blanks. Search by switch brand and key number, or describe the equipment and let ChatMRO match the control key.
Browse →Control Transformers
Step-down control transformers converting line voltage to 24V, 120V or other control circuit voltages for machine control panels and industrial equipment. Search by VA rating and voltage configuration, or describe the control circuit load.
Browse →Conventional Spray Guns
Air-atomizing spray guns that mix compressed air with paint or coating material at the nozzle to produce a fine spray pattern, sized by fluid nozzle diameter and rated air consumption. Search by atomization type, nozzle size or feed method, or describe the coating and finish requirement.
Browse →Convertible Hand Trucks
Convertible hand trucks that fold between upright dolly configuration and flat platform cart configuration, sized by load capacity and platform dimensions. Search by capacity and use case, or describe what you're moving and let ChatMRO match the truck.
Browse →Convex Safety & Security Mirrors
Acrylic and glass convex mirrors that widen the field of view at blind corners, forklift aisles and dock doors, sized by diameter and viewing distance. Search by mount type and diameter, or describe the blind spot and let ChatMRO match the mirror.
Browse →Coolant Vacuums
Pneumatic and electric wet vacuums built for recovering used cutting fluid, coolant sumps and swarf from CNC machines and sumps, with chemical-resistant seals and gaskets rated for oil-based and water-soluble coolants. Search by tank capacity and drive type, or describe your machine sump size and let ChatMRO match the vacuum.
Browse →Cooling Filter Dryers
Refrigerant filter driers installed in the liquid or suction line of refrigeration and A/C systems to remove moisture, acid, and particulate contamination. Search by connection size, refrigerant type and flow capacity.
Browse →Cooling Sight Glasses
Refrigerant line and coolant sight glasses with optional built-in moisture indicators, in solder, flare and threaded connection styles across common refrigeration line sizes. Search by connection size and pressure rating, or describe the system you're servicing and let ChatMRO match the sight glass.
Browse →Cooling Vests
Personal protective cooling garments using evaporative, phase-change gel or ice-pack technology to reduce core body temperature in hot work environments. Search by cooling method and rated duration, or describe the heat exposure and let ChatMRO match the vest.
Browse →Copper Blanks, Flats, Bars, Plates and Sheet Stock
Raw copper mill stock in flat bar, plate and sheet form, primarily C110 electrolytic tough pitch and C101 oxygen-free copper, sized by gauge or thickness and supplied in annealed or various hard tempers. Search by alloy and dimension, or describe the electrical or thermal application you're machining or forming for.
Browse →Copper Foil Rolls
Electrolytic (ED) and rolled annealed (RA) copper foil supplied in roll form, for shielding, PCB fabrication, gasketing and electrical applications. Search by thickness, width and grade, or describe the application and let ChatMRO match the right foil.
Browse →Copper Pipe and Tubing
Rigid and soft-temper copper tube for plumbing, refrigeration and process piping, sized by nominal diameter and wall-thickness type designation (K, L, M). Search by pipe type and diameter, or describe the application and let ChatMRO match the right tube.
Browse →Copper Rod Stock
C110 electrolytic tough pitch and C101 oxygen-free copper round rod stock used for electrical, plumbing and machining applications, specified by diameter, copper grade and temper rather than length alone. Search by diameter, grade or temper, or describe the machining or conductivity application.
Browse →Cordless Cable Cutters
Battery-powered hydraulic cable cutters for copper, aluminum and ACSR conductors, sized by maximum cut diameter and battery platform. Search by cable type and diameter, or describe the cutting job and let ChatMRO match the tool.
Browse →Cordless Circular Saws
Battery-powered circular saws sized by blade diameter and platform voltage, in sidewinder and worm-drive configurations, for job site framing and general cutting without a cord. Search by blade size and battery platform, or describe the material and cut depth and let ChatMRO match the saw.
Browse →Cordless Crimpers
Battery-powered hydraulic crimping tools for terminating lugs, connectors and cable ends, delivering consistent high-tonnage crimp force without a hand-pump or corded hydraulic pump unit. Search by crimp force and die/connector compatibility, or describe your cable size and let ChatMRO match the right tool.
Browse →Cordless Drills
Battery-powered drill/drivers and hammer drills across voltage platforms, with keyless chucks, adjustable clutch settings and brushless motor options for construction, fabrication and MRO use. Search by voltage and chuck size, or describe the material and application and let ChatMRO match the drill.
Browse →Cordless Grease Guns
Battery-powered grease guns delivering high-pressure grease output without manual pumping, sized by output pressure and cartridge capacity for maintenance and fleet lubrication tasks. Search by voltage platform, max pressure and cartridge size, or describe the lubrication task and let ChatMRO match the grease gun.
Browse →Cordless Impact Wrenches
Battery-powered impact wrenches that deliver high rotational torque in rapid pulses for fastening and removing nuts, bolts and lug nuts without a compressed-air line. Search by drive size, torque output and battery platform, or describe your fastener and torque range and let ChatMRO match the right tool.
Browse →Cordless Tool Accessories
Replacement batteries, chargers, bits and attachments matched to major cordless tool battery platforms, in voltage and amp-hour ranges spanning compact to high-capacity packs. Search by platform and voltage, or describe the tool being serviced and let ChatMRO match the accessory.
Browse →Cordless Tool Battery Chargers
Replacement and multi-bay chargers matched to specific cordless tool battery platforms and voltages, from standard overnight chargers to high-amperage fast chargers for job-site turnaround. Search by voltage platform and charger type, or describe the tool brand and battery you need to charge.
Browse →Coring Bits
Coring bits cut a cylindrical core through concrete, masonry or rock rather than reducing the material to dust, specified by diameter, segment/bond type and wet or dry cutting method for construction, plumbing and geological applications.
Browse →Cork Roll Stock
Pure cork and cork-rubber blend sheet stock supplied in rolls for gasket fabrication, vibration damping and cushioning, in thicknesses from 1/32 inch up. Search by thickness and blend ratio, or describe the sealing or damping application.
Browse →Corrosive Cabinets
Corrosive Cabinets, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Cotter Pins
Split cotter pins, hairpin cotters and R-clips for securing clevis pins, castle nuts and shafts against rotation or axial loss. Search by pin diameter, length and material and let ChatMRO match the right pin.
Browse →Countersunk Washers
Beveled countersunk washers that seat flat and oval head screws flush against soft or thin materials, sized to match the screw's head angle and shank diameter. Search by countersink angle, bore size or material.
Browse →Coupling Inserts
Elastomeric spider inserts for jaw-style flexible couplings, sized by coupling frame size and durometer (hardness) rating to match torque and shock-load requirements. Search by coupling size or describe the drive application and let ChatMRO match the insert.
Browse →Covered Spill Containment Pallets and Platforms
Spill containment pallets and platforms fitted with a weatherproof cover or roof, keeping stored drums and totes protected from rain and sun while the sump beneath still captures leaks and spills per EPA and SPCC requirements. Search by drum capacity, sump volume and cover type, or describe the number of drums and outdoor exposure and let ChatMRO match the right unit.
Browse →CPVC Pipe Fittings
Chlorinated PVC pipe fittings — elbows, tees, couplings and reducers — for hot and cold water plumbing and industrial chemical piping, in Schedule 40 and Schedule 80 pressure ratings. Search by size and connection type, or describe the piping system.
Browse →Crane Scales and Dynamometers
Crane scales for overhead load weighing and dynamometers for tension and force measurement, sized by capacity and accuracy class, for rigging, lifting and load testing. Search by capacity and connectivity, or describe the lift and let ChatMRO match the right instrument.
Browse →Crimping Tool Dies
Interchangeable hex and indent crimp dies sized for specific wire gauge, terminal type and crimper model, for hydraulic, battery-powered and hand crimping tools. Search by die profile and tool compatibility, or describe the terminal and wire size and let ChatMRO match the right die.
Browse →Crimping Tool Kits
Ratcheting, hydraulic and hand-actuated crimping kits for terminating wire terminals, lugs and connectors across a specified gauge range. Search by connector type and wire gauge, or describe the termination job and let ChatMRO match the right kit.
Browse →Critical Area Vacuums
HEPA and ULPA-filtered vacuums for cleanroom, containment and other critical-area environments where particulate release during cleaning must be minimized. Search by filtration level, certification or application, or describe the environment and let ChatMRO match the right vacuum.
Browse →Crowfoot Socket Wrench Sets
Low-profile, open-jaw sockets that attach to a ratchet, extension or torque wrench to reach fasteners a standard socket or box wrench can't access. Search by drive size, jaw style (open-end or flare nut) and size range.
Browse →Crowfoot Socket Wrenches
Open-end and flare nut crowfoot sockets sized to attach to a torque wrench or ratchet for reaching fasteners in confined spaces standard sockets can't access. Search by drive size and jaw opening, or describe the fastener and clearance and let ChatMRO match the crowfoot.
Browse →Cryogenic Hoses
Vacuum-jacketed and flexible transfer hoses rated for liquid nitrogen, liquid oxygen, liquid argon and other cryogenic liquids down to -320°F. Search by media compatibility and hose construction, or describe the transfer application and let ChatMRO match the right hose.
Browse →Cups and Mugs
Cups and mugs supply breakroom, facility and food service drinkware needs, specified by material (paper, foam, ceramic, insulated plastic), capacity and disposable vs. reusable use case.
Browse →Current Probes
AC and AC/DC current clamp probes for use with oscilloscopes and meters, sized by current range and bandwidth. Search by measurement type and current range, or describe the signal you're capturing.
Browse →Current Sensor Relays
Split-core and solid-state current sensor relays for monitoring motor and equipment load. Search by current range and output, or describe the monitoring application.
Browse →Current Transducers
Current transducers convert AC or DC line current into a proportional, isolated low-level signal for monitoring, control and protection systems, using Hall-effect or current-transformer sensing technology. Search by current range and output signal, or describe the application and ChatMRO matches the right transducer.
Browse →Current Transformers
Metering and protection-class current transformers rated by turns ratio, accuracy class and burden, in window/donut, bar and wound configurations. Search by primary current rating and accuracy class, or describe your metering or protection application and let ChatMRO match the CT.
Browse →Cut Resistant Gloves
Cut resistant gloves rated to ANSI/ISEA 105 cut levels A1 through A9, indexed by shell material, coating type and coating coverage. Search by cut level and grip requirement, or describe the handling hazard and let ChatMRO match the glove.
Browse →Cutting and Grinding Fluids
Water-soluble oils, semi-synthetic and full-synthetic coolants, and straight cutting oils for machining and grinding operations, mixed at ratios from 3% to 10% for coolant and used neat for straight oils. Search by fluid type and target operation, or describe the material and machining process and let ChatMRO match the fluid.
Browse →Cutting Boards and Mats
NSF-certified high-density polyethylene (HDPE) cutting boards and rubber or vinyl anti-fatigue prep mats, in color-coded sets for food-safety cross-contamination control. Search by size, thickness and surface type, or describe your prep station and let ChatMRO match the right board.
Browse →Cutting Tool Storage
Endmill holders, drill/tap index cabinets and modular cutting tool organizers that protect and organize machining cutting tools by size, sized by tool diameter capacity and storage format. Search by tool type and capacity, or describe your shop's tool inventory and let ChatMRO match the right storage.
Browse →Cutting Torches
Oxy-acetylene, oxy-propane and oxy-fuel cutting torches sized by cutting tip and gas flow rather than torch body alone, matched to plate thickness and fuel gas type. Search by material thickness and fuel gas and let ChatMRO match a torch and tip combination.
Browse →Cylinder Brackets
Clevis, trunnion, flange and foot mounting brackets sized to match specific hydraulic and pneumatic cylinder bore sizes and mounting standards. Search by mount style and bore size, or describe the cylinder and load direction and let ChatMRO match the bracket.
Browse →Cylinder Cabinets
Vented and fire-rated compressed gas cylinder storage cabinets for flammable, oxidizing and inert gas cylinders, in indoor and outdoor rated configurations. Search by cylinder capacity, ventilation type and fire rating, or describe the gas type you're storing.
Browse →Cylinder Caddies
Wheeled hand trucks and carts sized to safely transport single or multiple compressed gas cylinders, with a chain or strap restraint system and a base configured for the cylinder diameter and count. Search by cylinder capacity and single vs. multi-cylinder configuration, or describe the cylinder size and let ChatMRO match the caddy.
Browse →Cylinder Lift Trucks
Manual and hydraulic hand trucks purpose-built for safely transporting and lifting compressed gas cylinders, with cradle or chain-retention systems sized to standard cylinder diameters. Search by cylinder capacity and lift height, or describe your cylinder size and let ChatMRO match the right truck.
Browse →Cylinder Mold Accessories
Plastic and steel cylinder molds and related accessories for concrete and asphalt compressive strength sample preparation, sized to ASTM/AASHTO standard diameters. Search by mold diameter or describe the testing standard and let ChatMRO match the accessory.
Browse →Cylinder Molds
Steel, plastic and cardboard cylinder molds for casting concrete compression test specimens, sized and certified to ASTM C470 for the diameter and height ratios standard testing labs require. Search by diameter and material, or describe the mix design being tested and let ChatMRO match the mold.
Browse →Cylinder Position Sensors
Reed switch and solid-state Hall effect position sensors that detect piston location on pneumatic and hydraulic cylinders fitted with magnetic pistons, sized by mounting style and cylinder body profile. Search by sensor type and cylinder brand, or describe the actuator and let ChatMRO match the sensor.
Browse →Cylinder Stands
Storage stands, dollies and mobile racks for compressed gas cylinders, sized to single and multi-cylinder configurations with chain or strap securement. Search by cylinder capacity and mobility, or describe your gas storage need.
Browse →Cylindrical Roller Bearings
Radial bearings using cylindrical rollers in line contact with the raceway to carry heavy radial loads at higher capacity than equivalent-size ball bearings, in single and double row configurations. Search by bore size and configuration, or describe the load and shaft speed and let ChatMRO match the bearing.
Browse →Cylindrical Vibration Isolators
Rubber-in-shear and spring-based cylindrical mounts that isolate equipment from structure-borne vibration, sized by static load capacity and natural frequency for pumps, generators, HVAC equipment and precision instruments. Search by load capacity, durometer and mounting style, or describe the equipment weight and vibration source and let ChatMRO match the isolator.
Browse →Damage Indicator Labels
Adhesive tilt, shock and temperature indicator labels that permanently and visibly trigger when a shipment is mishandled, applied to packaging as a tamper-evident record for damage claims. Search by trigger type and sensitivity threshold, or describe your shipment and let ChatMRO match the right label.
Browse →Damper and Valve Replacement Motors
Electric replacement actuator motors for HVAC dampers and control valves, in spring-return and non-spring-return designs across floating, proportional and on/off control signals. Search by torque rating, control signal and rotation angle, or describe the damper or valve you're actuating.
Browse →DC Gearmotors
Integrated DC motor and gear reducer assemblies delivering low-speed, high-torque rotary output directly from a compact package, specified by voltage, gear ratio and output torque/speed. Search by voltage and torque, or describe the driven mechanism and let ChatMRO match the gearmotor.
Browse →DC Motor and Control Assemblies
Matched DC motor and controller assemblies covering brushed permanent-magnet and brushless (BLDC) designs, sized by voltage, horsepower and control method (PWM speed control, closed-loop feedback). Search by motor type and voltage, or describe the application load and duty cycle you're driving.
Browse →DC Permanent Magnet Motors
Brushed DC permanent magnet motors offering simple, linear speed control via armature voltage without field windings, in fractional to integral horsepower ratings for variable-speed industrial drive applications. Search by horsepower and voltage, or describe the drive application you're sizing for.
Browse →DC Power Supplies
Linear and switching DC power supplies for bench testing, OEM equipment and process control, regulated to hold stable output voltage or current under load. Search by output voltage/current rating, single or multi-output, or mounting format.
Browse →DC Speed Controls
PWM and SCR-based DC motor speed controllers for variable speed drive of brushed and permanent magnet DC motors, in open-chassis and enclosed panel-mount configurations. Search by motor voltage/current and control method, or describe your drive application.
Browse →DC Wound Field Motors
DC motors with electromagnetically wound field windings — shunt, series and compound configurations — offering speed and torque control not available in permanent magnet DC motors. Search by field configuration and horsepower, or describe the load requirement and let ChatMRO match the motor.
Browse →Deadbolt Locks
Bolt-style locks that project a solid steel bolt into the door frame independent of the door handle's latch, rated by ANSI grade for security and durability. Search by cylinder type — single or double — grade, or backset dimension.
Browse →Deadlatch Hardware
Self-latching deadlatch bolts, strike plates and auxiliary latch hardware for commercial entry doors, panic-hardware assemblies and residential entrances. Search by backset, latch throw or door prep and let ChatMRO match compliant hardware.
Browse →Deburring Blades
Replacement swivel-head and fixed deburring blades in HSS and carbide, sized for standard scraper-style handles, for deburring holes, edges and cut ends on metal and plastic. Search by blade profile and handle compatibility, or describe the material and edge you're deburring.
Browse →Decade Boxes
Precision instruments with switch-selectable resistance, capacitance or inductance in decade (multiples of 10) steps, used to substitute a known, adjustable component value into a test circuit. Search by component type, total range and step resolution, or describe the calibration or test application.
Browse →Deck Nails
Corrosion-resistant nails engineered for exterior deck framing and board fastening, in ring-shank and spiral-shank patterns with stainless, hot-dip galvanized or polymer-coated finishes. Search by shank type, coating and length, or describe the decking material and let ChatMRO match the right nail.
Browse →Deck Screws
Corrosion-resistant exterior screws for wood, composite and PVC decking, coated or stainless to resist weathering and treated-lumber chemical corrosion. Search by drive type, coating and length, or describe your decking material and let ChatMRO match the right fastener.
Browse →Decontamination Showers
Emergency decontamination showers combining full-body deluge, eyewash and hand-wash stations for rapid chemical exposure response, in freestanding, wall-mounted and trailer-mounted configurations. Search by mounting type and flow rate, or describe the hazard and site setup you're protecting.
Browse →Deep Well Submersible Pump Motors
Water-filled and oil-filled submersible motors sized to fit 4-inch, 6-inch and 8-inch well casings, for driving multistage borehole pumps at depth. Search by horsepower, voltage and casing diameter, or describe the well and pump you're pairing it with.
Browse →Demolition Hammer Accessories
Chisels, bull points, spade and clay spade bits with hex and SDS-Max shanks, sized to common demolition hammers and breakers for concrete, masonry and asphalt work. Search by shank type and bit style, or describe the hammer model and material being broken.
Browse →Depth Micrometers
Mechanical and digital depth micrometers for measuring hole depths, slot depths and step heights to 0.001 in or 0.01mm resolution, with interchangeable rod sets extending range. Search by measuring range and resolution, or describe the depth measurement application.
Browse →Desiccant Dryers
Heatless and heated desiccant compressed air dryers sized from 10 to 2,000+ SCFM, delivering pressure dew points down to -40°F or -100°F for moisture-sensitive pneumatic and process applications. Search by CFM capacity, dew point requirement or regeneration type.
Browse →Desk Mover and Dolly Accessories
Furniture skates, moving straps, replacement wheels and glides used with desk movers and dollies to relocate heavy office furniture without lifting. Search by load capacity and accessory type, or describe the furniture you're moving and let ChatMRO match the right accessory.
Browse →Detent Lock, Pop & Plunger Pins
Quick-release locating pins that use a spring-loaded ball detent, button-release plunger or L-handle lock to secure and release fixtures, guards and adjustable assemblies without tools. Search by pin diameter, locking mechanism or load rating, or describe your application and let ChatMRO match the pin.
Browse →Diagonal Cutters
Diagonal cutting pliers (dikes) for cutting wire, cable and component leads flush to a surface, in lengths from 4 in precision cutters to 8 in heavy-duty models. Search by jaw length, wire cutting capacity and handle type.
Browse →Dial Calipers
Mechanical dial calipers for outside, inside, depth and step measurement, in inch, metric and dual-scale readouts. Search by measuring range and resolution, or describe the measurement task and let ChatMRO match the caliper.
Browse →Dial Indicators
Plunger-style and lever (test) dial indicators for precision runout, alignment and dimensional inspection, indexed by measuring range, graduation and accuracy class. Search by range and mounting lug type, or describe the measurement task and let ChatMRO match the indicator.
Browse →Dial Thermometers
Bimetal and vapor-pressure dial thermometers for direct-reading process, tank and pipe temperature monitoring, in fixed and adjustable-angle stem configurations. Search by temperature range and stem length, or describe the process line and let ChatMRO match the thermometer.
Browse →Dial Torque Wrenches
Dial-indicator torque wrenches that display applied torque continuously on an analog gauge, used where real-time torque readout or peak/track memory needle function is preferred over a click mechanism. Search by torque range, drive size or accuracy class, or describe the fastening application and let ChatMRO match the right wrench.
Browse →Diameter Gauges
Go/no-go plug and ring gauges, snap gauges and dial bore gauges for verifying shaft, bore and pin diameters to a fixed tolerance class. Search by nominal size, gauge type and tolerance grade, or describe the diameter you need to inspect.
Browse →Diamond and CBN Grinding Wheels
Diamond and CBN (cubic boron nitride) superabrasive grinding wheels for carbide, ceramic and hardened tool steel, sized by grit size, bond type and wheel diameter. Search by material being ground and grit size, or describe the tooling application and let ChatMRO match the wheel.
Browse →Diamond Saw Blades
Diamond-segmented saw blades for cutting concrete, masonry, tile, asphalt and stone, in wet-cut and dry-cut bond formulations matched to material hardness. Search by blade diameter and material to be cut, or describe your saw and application and let ChatMRO match the right blade.
Browse →Diamond Segment Cup Grinding Wheels
Segmented diamond cup wheels for angle grinders and floor grinders, used to remove coatings, level high spots and prepare concrete surfaces prior to coating or polishing. Search by diameter, segment count and bond hardness, or describe your surface and let ChatMRO match the right wheel.
Browse →Diamond Surface Sharpening Stones
Continuous and monocrystalline diamond-coated steel plates for sharpening knives, chisels and plane irons, in coarse-to-extra-fine grit progressions. Search by grit, plate size and diamond bond type, or describe the tool edge you're sharpening.
Browse →Diaphragm Compressor Vacuum Pump
Oil-free diaphragm pumps that compress or evacuate gas using a flexing PTFE or elastomer diaphragm, eliminating oil contamination risk in the pumped media. Search by flow rate, ultimate vacuum and diaphragm material, or describe the gas being handled.
Browse →Die Grinders
Pneumatic and electric die grinders for deburring, port work and precision grinding, in straight and right-angle configurations with 1/4-inch and 1/8-inch collets. Search by drive type and RPM, or describe the material and finish you're working toward.
Browse →Dielectric Unions
Dielectric unions that electrically isolate dissimilar metal piping to prevent galvanic corrosion at the joint, sized by NPT connection and rated working pressure. Search by pipe size, thread type or metal combination.
Browse →Differential Pressure Gauge Accessories
Manifolds, diaphragm seals, snubbers and mounting hardware that support and protect differential pressure gauges and transmitters in process instrumentation. Search by manifold valve configuration and process connection, or describe the DP measurement application and let ChatMRO match the accessory.
Browse →Differential Pressure Gauges
Diaphragm and gauge-type differential pressure instruments for filter monitoring, duct static pressure and process readings. Search by range and media, or describe the application.
Browse →Digital and Mechanical Timers
Digital and mechanical timers switch loads on a programmed or dialed schedule, in panel-mount, DIN-rail, and plug-in formats with mechanical or solid-state contacts. Search by mounting type, timing range, and contact rating, or describe the control task and let ChatMRO match the right timer.
Browse →Digital Angle Finders
Electronic angle-measurement tools that read out angle in degrees with digital precision, replacing bevel protractors and combination squares for setup and inspection work. Search by measurement range, resolution or base style, or describe the angle-setting task.
Browse →Digital Calipers
Electronic calipers measuring outside, inside, depth and step dimensions with digital readout, sized by measuring range and resolution. Search by range and accuracy class, or describe the measurement task and let ChatMRO match the right caliper.
Browse →Digital Multimeters
Handheld electronic test instruments measuring voltage, current, resistance and other electrical parameters, sized by CAT safety rating and measurement accuracy. Search by CAT rating and required functions, or describe the electrical work and let ChatMRO match the right meter.
Browse →Digital Panel Meters
Panel-mounted digital instruments displaying voltage, current, frequency, or process signal values from a live circuit or sensor, sized by input range and signal type for direct integration into equipment enclosures and control panels. Search by measured parameter and input type, or describe the signal you're displaying.
Browse →Digital Panel Mount Thermometers
Panel-mounted digital thermometers with thermocouple and RTD inputs for equipment and process temperature display, in standard DIN cutout sizes. Search by sensor input type and panel cutout, or describe your monitoring application.
Browse →Digital Pressure and Vacuum Gauges
Electronic pressure and vacuum gauges with digital LCD or LED read-out, offering higher accuracy and data logging or signal output options not available on analog dial gauges. Search by pressure range and accuracy class, or describe the media and process signal need and let ChatMRO match the gauge.
Browse →Digital Pressure Vacuum Gauges with Transmitters
Digital pressure and vacuum gauges that combine a local digital readout with an integrated transmitter output, letting one instrument provide both a visual reading and a signal to a PLC or data system, specified by range, accuracy and output signal type. Search by pressure range, output signal or process connection, or describe the monitoring application.
Browse →Dilution Tanks and Traps
Acid dilution and neutralization tanks, and lab waste traps, for safely diluting corrosive or hazardous discharge before it enters the sanitary sewer, in polyethylene and fiberglass construction. Search by capacity and application, or describe the effluent type and discharge volume and let ChatMRO match the system.
Browse →Direct Connect Filter Cartridges
Push-fit and threaded quick-connect filter cartridges that mount directly to the supply line without a separate housing, for water, air and process filtration. Search by connection size and micron rating, or describe the flow rate and media.
Browse →Direct Drive Blower Motors
Direct drive blower motors couple straight to the blower wheel with no belt or pulley, specified by horsepower, voltage, speed (RPM) and frame/mounting style for furnaces, air handlers and package units.
Browse →Direct Drive Blower Wheels
Forward-curved (squirrel cage) and backward-inclined blower wheels sized to bolt directly onto a motor shaft, with no belt or pulley reduction. Search by wheel diameter, width, bore size and rotation, or describe the blower housing and let ChatMRO match the wheel.
Browse →Direct Drive Fan Motor Assemblies
Complete replacement units combining a motor and fan blade or wheel directly coupled with no belt or pulley between them, used where a belt-drive system's slippage, maintenance and alignment requirements aren't wanted or where the compact direct-drive footprint is required. Search by motor horsepower, blade diameter and mounting configuration, or describe the fixture or fan you're replacing and let ChatMRO match the right assembly.
Browse →Disc Padlocks
Round-bodied, shrouded disc padlocks that protect the shackle from bolt cutters and pry attacks, commonly specified for gates, storage containers and high-security applications. Search by shackle style, keying and security rating, or describe the application you're securing.
Browse →Dishes and Petri Dishes
Sterile and non-sterile petri dishes, weighing dishes and culture dishes in polystyrene and glass, from 35mm to 150mm diameter, for microbiology, cell culture and lab sample prep. Search by diameter, material and sterility.
Browse →Disposable Ear Plugs
Single-use foam and PVC ear plugs rated by Noise Reduction Rating (NRR) for occupational hearing protection, available corded, uncorded and in bulk dispenser-ready packaging. Search by NRR and material, or describe the noise environment and let ChatMRO match the right plug.
Browse →Disposable Towels and Wipes
Disposable shop towels, wet wipes and industrial wiping cloths in DRC, spunlace and paper stock, sold by the case and in roll, box or centerfeed dispensing formats. Search by material and dispensing format, or describe your wiping or cleanup application.
Browse →Disposal Cans
Self-closing safety disposal cans for oily rags, solvent-soaked waste and flammable debris, built to OSHA and NFPA requirements with spring-loaded lids that seal automatically. Search by capacity and material, or describe the waste type and required listing.
Browse →Dissolved Oxygen Meters
Portable and benchtop dissolved oxygen meters using galvanic or optical (luminescent) sensors for water quality, aquaculture and wastewater monitoring. Search by sensor type and application, or describe the water body being tested and let ChatMRO match the meter.
Browse →Distance Meters
Handheld laser and ultrasonic distance meters that measure length, area and volume without a tape measure, sized by maximum range and accuracy for construction, facilities and surveying use. Search by range and accuracy, or describe the measurement job.
Browse →Dock Bumpers
Solid rubber block, laminated and extruded dock bumpers absorbing trailer impact at loading dock faces, in bolt-on and weld-on mounting styles. Search by projection, thickness and dock face material, or describe the loading dock you're protecting.
Browse →Dock Ladders
Fixed and portable steel and aluminum ladders for accessing loading docks, platforms and elevated work areas, rated for industrial duty and OSHA-compliant rung spacing. Search by material, height and mounting type.
Browse →Dock Levelers
Mechanical, hydraulic and air-powered dock levelers that bridge the gap between a loading dock and a trailer bed, in fixed and telescoping lip styles rated from 20,000 to 45,000+ lb capacity. Search by capacity, pit size or operating type.
Browse →Dock Plates and Boards
Steel, aluminum and diamond-plate transition plates that bridge the gap between a loading dock and a truck bed or trailer, rated by load capacity for pallet jack, forklift or hand-cart traffic. Search by capacity rating, material and plate width, or describe the gap and equipment crossing it and let ChatMRO match the plate.
Browse →Dock Seals
Foam-filled and inflatable dock seals that close the gap between a trailer and building opening during loading, sized to the dock door opening and trailer height range served. Search by seal type, opening size and trailer height range, or describe the dock configuration.
Browse →Dock Shelters
Foam curtain and inflatable dock shelters that seal the gap between a building's loading dock opening and a parked trailer, blocking weather and controlling temperature loss during loading and unloading. Search by shelter type, door opening size and trailer profile, or describe your dock configuration.
Browse →Dome Safety and Security Mirrors
Convex dome mirrors for warehouse aisle, parking and roadway blind-spot visibility, sized by dome diameter, field of view and indoor/outdoor construction. Search by mounting location and viewing distance, or describe the blind spot and let ChatMRO match the mirror.
Browse →Door Closers
Hydraulic surface-mounted, concealed and floor-spring door closers sized by ANSI closing force grade for commercial, fire-rated and ADA-accessible door openings. Search by mount type and force size, or describe the door and let ChatMRO match the closer.
Browse →Door Drip Edges
Drip cap flashing installed above exterior door and window openings to deflect rainwater away from the frame and prevent moisture intrusion behind the trim. Search by material, profile depth and opening width, or describe your door frame and let ChatMRO match the right drip edge.
Browse →Door Hinges
Butt, continuous (piano), spring and pivot hinges in steel, stainless and brass, sized to door weight, frame prep and swing direction. Search by hinge type and leaf size, or describe the door and frame and let ChatMRO match the right hinge.
Browse →Door Kick Plates
Stainless steel, aluminum and PVC kick plates that protect the lower door surface from cart, foot and equipment impact, sized to standard door widths and heights. Search by material, gauge and door width and let ChatMRO match the plate.
Browse →Door Knob Locksets
Complete door knob locksets covering passage (no lock), privacy (push-button or turn lock) and keyed entry functions, in ANSI/BHMA Grade 1-3 duty ratings for commercial and residential doors. Search by function, backset and finish, or describe the door application and let ChatMRO match the right set.
Browse →Door Lever Locksets
ADA-compliant lever handle locksets in passage, privacy, entry and classroom functions, sized to standard 2-3/8" and 2-3/4" backsets. Search by door function and grade, or describe the door and let ChatMRO match the right lockset.
Browse →Door Locks
Door locks for commercial and industrial doors range from cylindrical and mortise locksets to exit devices and electronic access locks, rated by ANSI/BHMA grade for durability and function. Search by lock function, grade, and keying system, or describe the door and application and let ChatMRO match the right lock.
Browse →Door Louvers
Fixed-blade and adjustable louvers installed into door and panel cutouts to provide passive ventilation while blocking direct sightlines and light. Search by free area, blade angle and frame material, or describe the airflow requirement and let ChatMRO match the louver.
Browse →Door Stops
Floor-mounted, wall-mounted, and hinge-pin door stops that protect walls, hardware, and doors from impact damage, including hold-open styles for fire-rated and mechanical door control. Search by mounting style, material and hold-open function, or describe the door and let ChatMRO match a stop.
Browse →Door Strike Plates
Standard, security-reinforced and electric strike plates that mount to a door frame to receive the latch or deadbolt, sized by door prep dimensions and rated by security grade. Search by door prep and lock type, or describe the door and let ChatMRO match the right strike plate.
Browse →Door Sweeps
Threshold seals that mount to the bottom of a door to block drafts, dust, light and pests, available in brush, vinyl-fin and rubber-blade styles for varying gap sizes and floor surfaces. Search by mounting style, sweep material and door width.
Browse →Double End Threaded Studs
Fully threaded and tap-end studs threaded on both ends for flange, pipe and equipment assembly, in ASTM A193/A320 alloy grades and metric equivalents. Search by thread size, stud length and end configuration.
Browse →Double Loop and Jack Chain
Double loop (coil) chain and jack chain in low-carbon steel, zinc-plated, brass and stainless finishes, sized by wire gauge and link count per foot. Search by working load limit and finish, or describe the hanging or towing application.
Browse →Double Sided Tapes
Adhesive-coated-on-both-sides tapes for permanent or removable mounting, bonding and splicing, built on foam, film, or transfer (carrierless) constructions. Search by adhesive chemistry, carrier type, or bond strength requirement.
Browse →Dowel Pins
Precision ground dowel pins to ASME B18.8.2 tolerance classes for locating and aligning mating machine and fixture components. Search by diameter, tolerance class and material, or describe the fit you're designing for.
Browse →Downdraft Tables
Fixed and portable downdraft tables that pull dust, fumes and smoke down through a perforated work surface into a filtration system, sized by airflow capacity (CFM) and filter media type. Search by table size and application, or describe the process and let ChatMRO match the right table.
Browse →Drain and Drip Pans
Galvanized steel, polyethylene and PVC drip pans sized for water heaters, air handlers and condensate lines, with threaded or slip drain outlets. Search by tank diameter, pan depth and outlet size, or describe the equipment being protected.
Browse →Drain Cleaning Accessories
Replacement cables, cutting heads and auger attachments sized to common drum and sectional drain machines, for clearing clogs in kitchen, bath and main lines. Search by cable diameter and machine compatibility, or describe the drain size and clog type.
Browse →Drain Cleaning Machines
Drum-style, sectional cable and water jetter drain cleaning machines sized for line diameters from 1-1/4 inch branch lines through 10 inch main lines. Search by cable/hose capacity and line diameter, or describe the clog and pipe size and let ChatMRO match the machine.
Browse →Drain Covers and Seals
Floor drain grates, trap primer seals and backwater protection devices sized to standard drain bodies and load ratings for foot, cart or vehicle traffic. Search by drain diameter, material and load class, or describe the drain application and let ChatMRO match the right cover.
Browse →Drain Plugs
Threaded and expansion-style drain plugs in steel, brass and rubber for sealing tank, sump and equipment drain openings, with and without integrated magnets for debris collection. Search by thread size and material, or describe the tank or reservoir you're plugging.
Browse →Drain Strainers
Floor drain strainers, basket strainers and inline Y-strainers that trap debris before it reaches downstream piping or pumps, sized by pipe connection and perforation/mesh size. Search by pipe size and material, or describe the application and let ChatMRO match the strainer.
Browse →Drawer Bin Cabinets
Modular cabinets with multiple small pull-out drawers or removable bins for organizing fasteners, small parts and MRO supplies, rated by drawer count and per-drawer load capacity. Search by drawer count or cabinet size, or describe your storage need and let ChatMRO match the cabinet.
Browse →Drawer Bins
Drawer bins organize small parts, fasteners and components inside modular storage cabinets and workbenches, in fixed and adjustable-compartment styles. Search by bin size and compartment count, or describe the cabinet system and ChatMRO matches the right bins.
Browse →Drawer Slides
Ball bearing and roller drawer slides in full, over-travel and partial extension configurations, rated by load capacity for cabinetry, tool storage and industrial equipment drawers. Search by length and load rating, or describe the drawer and cabinet and let ChatMRO match the slide.
Browse →Drench Hoses
Emergency drench hose units for eyewash and safety shower stations, delivering ANSI Z358.1-compliant flow rates for spot flushing of chemical exposure to the face, body or under clothing. Search by flow rate, hose length or mounting configuration.
Browse →Drench Showers
Emergency shower and combination shower/eyewash stations providing immediate full-body flushing after chemical or hazardous material exposure. Search by mounting type and ANSI Z358.1 compliance, or describe your facility's hazard exposure and let ChatMRO match the right station.
Browse →Drill Bit and Tap Sets
Combination drill and tap sets pairing the correct tap drill size with each tap for clean, properly sized threads. Search by thread range, or describe the fastener sizes you tap most.
Browse →Drill Bit Cases & Cabinets
Index cases, wall-mount cabinets and rolling storage systems that organize drill bits, taps and small cutting tools by size for fast identification and protection from damage. Search by capacity and organization style, or describe the bit range you need to store.
Browse →Drill Bits
Twist, step, spade, masonry and specialty drill bits in HSS, cobalt and solid carbide, sized in fractional, wire gauge, letter and metric. Search by material being drilled and hole diameter, or describe the application and let ChatMRO match the bit.
Browse →Drill Bushings
Hardened steel bushings inserted into a drill jig or fixture to guide a drill, reamer or tap precisely and repeatably into a workpiece, built to ANSI standard bore and OD sizes. Search by bushing type, bore diameter and length, or describe the jig and tooling being guided.
Browse →Drill Chucks
Replacement and upgrade drill chucks holding drill bits and round-shank tooling in drill presses, hand drills and lathes, specified by capacity range and arbor mount type. Search by chuck capacity and mount, or describe the machine and let ChatMRO match the chuck.
Browse →Drill Presses
Bench-top and floor-standing drill presses for precision hole drilling, tapping and light milling, spanning fractional-horsepower hobby models to variable-speed production units. Search by spindle travel or chuck capacity, or describe the material and hole size you're drilling.
Browse →Drinking Fountain Parts
Bubblers, push button valves, strainers and repair kits for wall-mount and pedestal drinking fountains and bottle-filling stations. Search by fountain brand and part type, or describe the failure and let ChatMRO match the part.
Browse →Drinking Fountains
Wall-mount and freestanding drinking fountains, including bottle-filling models, indexed by cooling type, mounting style and ADA compliance. Search by mounting style and capacity, or describe the installation location and let ChatMRO match the fountain.
Browse →Drip Pans and Spill Containment Trays
Poly, steel and rubber drip pans and spill containment trays used to catch leaks and drips from drums, machinery and IBCs, sized by containment capacity to satisfy EPA/SPCC secondary containment requirements. Search by capacity, footprint or material, or describe what's being contained.
Browse →Drop-In Anchors
Internally threaded expansion anchors that set flush in a pre-drilled hole in solid concrete, expanded with a setting tool to accept a machine screw or bolt. Search by anchor diameter and material, or describe the base material and load and let ChatMRO match the anchor.
Browse →Drop-In Sinks
Self-rimming drop-in sinks that mount into a countertop cutout with the rim resting on the counter surface, sized by bowl count and overall dimensions. Search by material, bowl configuration or gauge.
Browse →Drum Accessories
Dispensing, sealing, and material-handling accessories for 55-gallon and other standard drums, including drum pumps, faucets, bung wrenches, and drum dollies. Search by function and drum size, or describe what you're dispensing, sealing, or moving.
Browse →Drum Bung and Plug Wrenches
Bung wrenches and plug wrenches sized for 2-inch and 3/4-inch NPT drum bungs in steel, aluminum and non-sparking bronze construction. Search by bung size and drum type, or describe the container you need to open.
Browse →Drum Carriers
Manual and hydraulic drum carriers for lifting, tilting and transporting 30- and 55-gallon steel or poly drums, with chime-hook or cradle designs sized to standard drum diameters. Search by drum capacity and lift type, or describe your drum size and let ChatMRO match the right carrier.
Browse →Drum Cones and Collars
Steel and polyethylene drum cones and neck collars that convert an open- or closed-head drum into a controlled-opening or bunged container, sized to standard 55-gallon and other drum diameters. Search by drum size and bung configuration, or describe the drum conversion and let ChatMRO match the cone or collar.
Browse →Drum Covers
Steel, polyethylene and fiber covers sized for 30, 55 and 85-gallon drums, in bolt-ring, lever-lock and snap-fit closure styles. Search by drum diameter, material and closure type, or describe the drum you need to seal.
Browse →Drum Cradles and Tippers
Cradles and hydraulic/mechanical tippers that tilt a 55-gallon (or other standard size) drum for controlled dispensing or emptying, rated by drum capacity and drive type. Search by drum size and drive type, or describe the dispensing application and let ChatMRO match the equipment.
Browse →Drum Deheaders
Pneumatic and manual deheading tools that cut and remove the top chime or lid of steel and fiber drums for cleaning, reconditioning or content access, sized for standard 30 and 55-gallon drum diameters. Search by drum size and operation type, or describe your drum handling process and let ChatMRO match the right deheader.
Browse →Drum Diameter Adapters
Adapter rings and clamp inserts that let a single drum handler, rotator or lifting attachment accommodate multiple drum diameters, from 55-gallon steel drums down to smaller pails. Search by drum size range and equipment type, or describe your drum handling setup.
Browse →Drum Dispensing and Containment Systems
Drum faucets, hand and electric pumps, funnels and spill containment pallets that allow controlled dispensing from drums while containing leaks and spills. Search by dispensing method and containment capacity, or describe the drum contents and dispensing task.
Browse →Drum Dollies
Wheeled dollies that support and move standard 30 and 55 gallon drums across a facility without lifting or tilting the drum by hand. Search by drum size, load capacity and dolly material, or describe the drum handling task and let ChatMRO match the dolly.
Browse →Drum Dumper
Hydraulic and manually operated drum dumpers that lift, tilt and discharge the contents of 30- and 55-gallon drums into hoppers, mixers or containers, eliminating manual pouring of heavy or hazardous drum contents. Search by capacity, dump height and drum size compatibility, or describe your discharge application.
Browse →Drum Hand Trucks
Steel and poly-frame drum hand trucks and dollies for moving 30 to 55-gallon drums, in fixed, tilt and rotating cradle designs with a range of wheel materials. Search by drum capacity, wheel type and frame material, or describe the drum handling task.
Browse →Drum Heaters
Wrap-around drum and pail heaters that reduce viscosity and prevent freezing in stored liquids, sized to standard container volumes. Search by drum size and wattage, or describe the fluid and required temperature and let ChatMRO match the heater.
Browse →Drum Lifters
Forklift-mount drum clamps, chain-suspended lifters and hydraulic rotators for safely handling 55-gallon steel, fiber and plastic drums without manual tipping or rolling. Search by drum diameter, capacity and mounting type, or describe the drum material and lift height.
Browse →Drum Lifters And Dispensers
Forklift-mounted, crane-suspended and manual drum lifters, rotators and dispensing faucets sized to standard 30/55-gallon steel and plastic drums, rated by working load limit. Search by drum size and lift/dispense method, or describe the handling task.
Browse →Drum Mixers
Motor-driven mixing equipment that clamps onto or mounts into standard 5-55 gallon drums to agitate, blend and prevent settling of liquids and slurries. Search by drum size and drive type, or describe the material being mixed and let ChatMRO match the right mixer.
Browse →Drum Pourers
Screw-in and clamp-on pour spouts for controlled dispensing from drums and pails, sized by bung thread size, material compatibility and flow rate control. Search by bung size, material or flow control type and let ChatMRO match the right pourer.
Browse →Drum Pump Motors
Electric and pneumatic motors that drive drum and barrel transfer pumps, sized by power source, horsepower and hazardous-location rating. Search by motor type, voltage or explosion-proof rating and let ChatMRO match the right motor.
Browse →Drum Pump Tubes
Replacement siphon/discharge tubes for hand and electric drum pumps, in polypropylene, PVDF and stainless steel construction, sized by length and drum depth. Search by chemical compatibility and length, or describe the pump and fluid you're transferring.
Browse →Drum Pumps
Electric and pneumatic drum pumps with polypropylene, stainless steel and PVDF wetted tubes for transferring chemicals, solvents and viscous fluids from drums and totes. Search by tube material, motor type and flow rate.
Browse →Drum Rollers
Single and double drum vibratory rollers for soil, asphalt and aggregate compaction, sized by drum width and operating weight. Search by drum configuration and application, or describe the material being compacted and let ChatMRO match the roller.
Browse →Drum Switches
Drum switches manually control motor direction — forward, off, reverse — by rotating a cam-driven contact drum, common on single- and three-phase motors in machine shop and hoist applications. Search by pole configuration and current rating, or describe the motor and ChatMRO matches the right switch.
Browse →Drum Tumblers
Rotary drum tumblers that deburr, polish and finish parts in bulk through tumbling action against abrasive or polishing media, sized by drum capacity and rotation speed. Search by capacity and media type, or describe the parts being finished and let ChatMRO match the right tumbler.
Browse →Drywall Nails
Ring-shank and cupped-head nails designed specifically to fasten gypsum board to wood framing, with a shank profile that resists pull-through and popping compared to a smooth common nail. Search by shank type, length and coating, or describe the board thickness and framing material and let ChatMRO match the right nail.
Browse →Drywall Screws
Bugle-head screws for fastening drywall to wood or metal framing, in coarse thread (Type W, for wood studs) and fine thread (Type S, for metal studs) styles, sized by length and gauge. Search by thread type and length, or describe the framing material you're fastening into.
Browse →Drywall Specialty Tools
Purpose-built tools for hanging, taping, mudding and finishing gypsum board, from banjo tapers and corner rollers to automatic taping tools and drywall lifts. Search by tool function and blade or roller width, or describe the finishing task and let ChatMRO match the right tool.
Browse →Dual Pressure Controls
Combined high/low pressure cutout switches in a single control body, protecting refrigeration and AC compressors from both excessive discharge pressure and inadequate suction pressure. Search by setpoint range and reset type, or describe the compressor and refrigerant and let ChatMRO match the control.
Browse →Duct and Cloth Tapes
Duct and cloth tapes use a fabric-reinforced backing with a rubber or acrylic adhesive, specified by tensile strength, adhesive type and width for HVAC ductwork, general repair, bundling and industrial applications.
Browse →Duct and Fittings
Round, rectangular and flexible ductwork with matched fittings — elbows, transitions, tees and dampers — indexed by gauge, material and connection type. Search by duct shape and size, or describe the airflow run and let ChatMRO match the fitting.
Browse →Duct Insulation
Fiberglass duct wrap, liner board and rigid duct board rated by R-value for thermal control and condensation prevention on HVAC supply, return and exhaust ductwork. Search by insulation type, R-value and jacket facing, or describe the duct system and let ChatMRO match the material.
Browse →Duct Pressure Switches
Differential pressure switches monitoring airflow and pressure across HVAC ductwork, filters and fans to trigger alarms, interlocks or control sequences. Search by pressure range, switch action and mounting configuration.
Browse →Ducted Fume Hoods
Ducted laboratory and process fume hoods that vent captured fumes to outside air through building ductwork, sized by interior width and rated face velocity for chemical fume containment. Search by width and sash configuration, or describe the lab process and let ChatMRO match the hood.
Browse →Ductile Iron Pipe Fittings
Ductile iron pipe fittings for water, wastewater and fire protection distribution, in mechanical joint, push-on and flanged configurations per AWWA/ANSI standards. Search by joint type and pressure class, or describe the pipe size and application and let ChatMRO match the fitting.
Browse →Ducting Hoses
Flexible PVC, polyurethane and wire-helix ducting hose for air movement, dust collection and fume/exhaust extraction, rated by diameter, temperature and static or dynamic conductivity requirements. Search by material, diameter and application, or describe the air handling task and let ChatMRO match the hose.
Browse →Ductless Fume Hoods
Filtered, recirculating fume hoods that scrub and return air to the room instead of exhausting outdoors, sized by filter chemistry and work opening width. Search by contaminant type and sash size, or describe the chemicals you're working with.
Browse →Dump Carts
Hopper-style carts that tilt or hydraulically dump their load for material handling, sized by volume and weight capacity, in manual push, tow-behind and powered self-propelled configurations. Search by capacity and dump mechanism, or describe the material and terrain and let ChatMRO match the cart.
Browse →Dunnage Racks
Low-profile, off-the-floor storage racks for bagged, boxed and bulk goods in warehouses, coolers and freezers. Search by capacity, deck material and number of shelf levels, or describe the load and let ChatMRO match the rack.
Browse →Dust and Microfiber Cloths
Lint-free cleaning cloths woven from split microfiber or treated cotton, sized and finished for dusting, glass cleaning, or industrial wipe-down without leaving fiber residue on the surface. Search by weave type, GSM weight, or reusable vs. disposable format.
Browse →Dust Collector Accessories
Replacement filter bags, cartridges, blast gates and static-grounding hardware for baghouse, cartridge and cyclone dust collectors. Search by micron rating, filter media and collector make, or describe the machine and let ChatMRO match the part.
Browse →Dust Collectors
Cyclone, baghouse and cartridge-style dust collectors rated by airflow (CFM) and filtration efficiency, for woodworking shops, metal fabrication and industrial process dust control. Search by CFM rating and filter media, or describe the dust source and let ChatMRO match the right collector.
Browse →Dust Pans
Handheld and long-handle pans used to collect swept debris and dust, available in lobby, upright and industrial-duty configurations. Search by handle style, material and pan width.
Browse →Dye Penetrants and Inspection Kits
Visible-dye and fluorescent liquid penetrant testing kits for non-destructive detection of surface-breaking cracks, porosity and defects in welds and castings, complete with cleaner, penetrant and developer. Search by penetrant type and sensitivity level, or describe the material and defect type you're inspecting for and let ChatMRO match the kit.
Browse →Ear Clamps
Stepless single-ear and double-ear hose clamps that provide a permanent, uniform crimped seal on flexible hose, common in automotive, fluid power and appliance assembly. Search by clamp diameter range, ear configuration or material, or describe the hose and application and let ChatMRO match the right clamp.
Browse →Ear Muffs
Passive and electronic hearing protection ear muffs rated by NRR for industrial noise environments, in standard, folding and cap-mount styles. Search by noise reduction rating and electronic/passive design.
Browse →Earth Ground Resistance Tester Accessories
Replacement ground stakes, test leads and connector accessories for earth ground resistance testers used in electrical grounding system verification. Search by lead length and stake material, or describe the tester brand and test method.
Browse →Earth Ground Resistance Testers
Instruments that measure earth grounding system resistance using fall-of-potential (3-pole/4-pole) or clamp-on stakeless methods, sized by measurement range and test current. Search by test method and application, or describe your grounding system and let ChatMRO match the right tester.
Browse →Edge and Center Finders
Mechanical spring-loaded edge finders, electronic contact-sensing edge finders, and wigglers used on milling machines and CNC mills to precisely locate a workpiece edge, center, or hole relative to the spindle, with typical accuracy of 0.0002 to 0.001 inch. Search by finder type and shank diameter, or describe the setup task and let ChatMRO match the tool.
Browse →Edge and Corner Protectors
Foam, cardboard and molded plastic edge and corner protectors that shield pallet loads, furniture and machinery from crushing, banding damage and impact during shipping and storage, sized by leg length and wall thickness. Search by material and application, or describe the load and let ChatMRO match the right protector.
Browse →Edge Mount Standoffs
Clamping standoff hardware that grips a panel's edge rather than passing through a drilled face hole, used to mount glass, acrylic and signage panels with a floating appearance and no visible face fasteners. Search by clamp thickness range, finish and material, or describe the panel you're mounting and let ChatMRO match the right standoff.
Browse →Eductor Jet Pumps
Venturi-principle eductor jet pumps that use a pressurized motive fluid to entrain and move liquid, slurry, or gas with no moving parts, sized by connection size and motive fluid pressure. Search by motive fluid, connection size and material, or describe the process and let ChatMRO match an eductor.
Browse →Effluent Pumps
Submersible effluent and grinder pumps for wastewater and septic systems. Search by solids size and horsepower, or describe the application.
Browse →Elbow, Knee and Ankle Supports
Compression sleeves, hinged braces and wrap supports for elbow, knee and ankle joints, used to prevent strain injuries and support joints already under stress in industrial and warehouse settings. Search by joint, support level and use case, or describe the task and existing condition.
Browse →Electric Actuated Ball Valves
Electric actuated ball valves pair a quarter-turn ball valve with a motorized actuator for remote or automated on/off and modulating flow control. Search by pipe size, voltage, and control signal, or describe the process and let ChatMRO match the right valve.
Browse →Electric Actuated Butterfly Valves
Butterfly valves paired with an electric motor actuator for remote or automated on/off and modulating flow control, sized by valve line size and actuator torque rating. Search by valve size, voltage and control signal type, or describe the pipeline and automation requirement.
Browse →Electric Ceiling Heaters
Fan-forced and radiant electric ceiling heaters for supplemental heat in bathrooms, garages, workshops and commercial spaces, sized by wattage and voltage to match room heat-loss calculations. Search by wattage, voltage and mounting style, or describe the space and let ChatMRO match the heater.
Browse →Electric Conduit Benders
Powered benders that form EMT, IMC and rigid metal conduit to precise degree bends without kinking or flattening the tube wall. Search by conduit size range and bend type, or describe the job and let ChatMRO match the right bender.
Browse →Electric Confined Space Fans and Blowers
Axial and centrifugal electric blowers for confined space ventilation, purging and man-entry supply air, sized by CFM and matched to flexible or rigid ducting. Search by airflow rating, duct diameter or intrinsic-safety requirement.
Browse →Electric Floor Heating Kit Accessories
Programmable thermostats, floor temperature sensors, uncoupling membranes and installation accessories that complete a radiant electric floor heating system beyond the heating cable or mat itself. Search by component type and system voltage, or describe the floor heating installation and let ChatMRO match the accessory.
Browse →Electric Floor Heating Kits
Electric radiant floor heating mats and loose cable kits with programmable thermostats, sized by coverage area for under-tile and laminate installation. Search by square footage, voltage and mat vs. cable format, or describe the floor type and room size.
Browse →Electric Hand and Die Grinders
Corded and cordless electric die grinders and hand grinders for deburring, port work and precision material removal, spanning 1/4in and 1/8in collet sizes and variable-speed models up to 30,000+ RPM. Search by collet size, RPM range and power source, or describe the material and task and let ChatMRO match the tool.
Browse →Electric Hoists
Wire rope and chain electric hoists for overhead lifting on cranes, monorails and jib arms, rated by capacity, lift height and duty cycle. Search by capacity and voltage, or describe the load and lift height and let ChatMRO match the hoist.
Browse →Electric Impact Wrenches
Corded and battery-powered electric impact wrenches delivering high rotational torque in rapid pulses for fastening and removing bolts and lug nuts, from compact 3/8 in. drive models to heavy-duty 1 in. drive industrial units. Search by torque output, drive size or voltage/power source, or describe the fastening application and let ChatMRO match the right wrench.
Browse →Electric Infrared Heater Elements
Quartz tube, ceramic and metal sheath infrared heating elements for process heating, comfort heating and industrial curing, rated by wattage, wavelength band and voltage. Search by emitter type and application, or describe the heating task and let ChatMRO match the element.
Browse →Electric Infrared Heaters
Radiant panel, quartz tube and ceramic emitter heaters that warm objects and people directly instead of heating air, sized for spot heating in loading docks, workshops and outdoor patios. Search by wattage, mounting style or coverage area.
Browse →Electric Pallet Jacks
Powered walk-behind and rider electric pallet jacks for repetitive pallet handling, sized by load capacity, fork length/width and battery voltage. Search by load capacity or describe the warehouse task and let ChatMRO match the pallet jack.
Browse →Electric Point of Use Water Heaters
Mini-tank and tankless electric water heaters sized from 2.5 to 20 gallons or by flow-rate GPM, installed close to a single fixture to eliminate long hot-water wait times and standby losses from a central heater. Search by tank size and voltage, or describe the fixture and distance from the main heater and let ChatMRO match the unit.
Browse →Electric Powered Airless Paint Sprayers
Electric airless paint sprayers that pump paint through a small tip orifice at high pressure to atomize coating without compressed air, sized by max pressure and flow rate (GPM). Search by pressure rating, tip compatibility or motor type.
Browse →Electric Pressure Washers
Corded electric pressure washers for light-duty to commercial washdown, specified by PSI, GPM flow rate and motor voltage/amperage. Search by pressure rating or describe the washdown task and let ChatMRO match the unit.
Browse →Electric Sanders
Corded and cordless power sanders — random orbital, belt, sheet and detail — that remove material or finish surfaces through abrasive motion, each type suited to a different balance of stock removal speed versus surface finish quality. Search by sander type, orbit style and pad size, or describe the material and finish you need and let ChatMRO match the right sander.
Browse →Electric Screwdrivers
Corded and cordless electric screwdrivers with adjustable clutch torque control for production fastening, sized by torque range and RPM. Search by torque range, clutch type or bit interface.
Browse →Electric Shear Accessories
Replacement blades, gearboxes and power cords for electric sheet metal shears, nibblers and swivel head shears. Search by shear model, blade type and material gauge capacity, or describe the tool and let ChatMRO match the part.
Browse →Electric Sprayer Pumps
Electric diaphragm and piston pumps for agricultural, lawn care and industrial spray equipment, sized by flow rate, maximum pressure and chemical-compatible wetted materials. Search by flow rate and voltage, or describe the chemical being sprayed and let ChatMRO match the right pump.
Browse →Electric Strikes
Electric strikes replace a standard door strike plate to allow remote or access-controlled unlatching, specified by voltage, fail-safe vs. fail-secure operating mode and frame preparation to match the door hardware and access control system.
Browse →Electric Tankless Water Heaters
Electric on-demand water heaters heating water only as it flows through, sized by kW rating and flow rate for whole-building or point-of-use installation. Search by required flow rate (GPM), voltage/amperage and installation type.
Browse →Electric Unit Heaters
Ceiling and wall-mount electric unit heaters for spot and zone heating in shops, warehouses and garages, in single- and three-phase configurations from 1.5 kW to over 30 kW. Search by heating capacity and voltage, or describe the space size and required temperature rise.
Browse →Electric Valve Actuators
Motorized actuators that open, close or modulate ball, butterfly and damper valves in place of manual or pneumatic operation, specified by output torque, voltage and control signal type. Search by torque and voltage, or describe the valve and control system and let ChatMRO match the actuator.
Browse →Electric Vibrators
Rotary electric vibrators for bin, hopper, chute and screen material-flow applications, specified by centrifugal force output, frequency and mounting pattern. Search by force rating and mounting type and let ChatMRO match the motor.
Browse →Electric Wall Mount Heaters
Fixed wall-mounted electric heaters using convection, fan-forced or radiant elements for supplemental or zone heating in commercial and industrial spaces. Search by wattage and voltage, or describe the room size and application and let ChatMRO match the right heater.
Browse →Electric Winches
12V and 24V DC electric winches for vehicle recovery and rigging, plus AC-powered industrial winches for material handling and hoisting, sized by rated line pull. Search by line pull capacity and mounting type, or describe the pulling or lifting application.
Browse →Electric Wire Rope Hoists
Motor-driven wire rope hoists for overhead crane, monorail and gantry lifting applications, specified by load capacity, lift height and FEM/CMAA duty classification. Search by capacity and voltage and let ChatMRO match the hoist.
Browse →Electrical Box Covers
Weatherproof, blank and device-specific covers for single-gang, multi-gang and junction electrical boxes, in metallic and non-metallic materials for indoor and outdoor NEC-rated installations. Search by box size, cover type and weather rating, or describe the box you're covering.
Browse →Electrical Control Pilot Lights
Panel-mount pilot lights and indicator lamps sized by mounting hole diameter and rated voltage, in LED and incandescent versions, with standard color coding for control panel status indication. Search by mounting size and voltage, or describe the panel and function and let ChatMRO match the light.
Browse →Electrical Device Enclosures
NEMA- and IP-rated enclosures for switches, receptacles, junctions and disconnects, indexed by environmental rating, material and knockout configuration. Search by NEMA type and enclosure size, or describe the installation environment and let ChatMRO match the box.
Browse →Electrical Glove Accessories
Electrical glove accessories protect and maintain rubber insulating gloves used for live electrical work, including leather protector gloves, storage bags and field air-test kits. Search by glove class and accessory type, or describe your PPE program and ChatMRO matches the right accessory.
Browse →Electrical Gloves
ASTM D120-rated rubber insulating gloves in Class 00 through Class 4, providing protection against contact voltages from 500V up to 36,000V, with leather protector gloves sold separately for mechanical protection. Search by voltage class and glove size, or describe the working voltage and let ChatMRO match the glove.
Browse →Electrical Properties Data Loggers
Standalone data loggers that record voltage, current, power and power quality over time for trending and diagnostics, sized by channel count and measurement range. Search by measurement type and channel count, or describe the monitoring period you need.
Browse →Electrical Safety Boxes
NEMA-rated lockable enclosures for electrical disconnects, junction points and lockout/tagout isolation, protecting live components from unauthorized access and the environment. Search by NEMA rating, size and application, or describe the electrical panel and let ChatMRO match the enclosure.
Browse →Electrical Sticks and Rescue Hooks
Insulated fiberglass tools rated for use around energized electrical equipment, from live-line operating sticks to shock rescue hooks used to separate a victim from an energized conductor without contact. Search by voltage rating, length or tool type, or describe the switching or rescue application.
Browse →Electrical Tapes
Vinyl, rubber splicing, and specialty electrical tapes rated per UL 510 for wire insulation, splicing and cable harness applications. Search by voltage rating, temperature range and tape width.
Browse →Electrical Wall Plates
Switch plates, outlet covers and combination wall plates in nylon, stainless steel and weatherproof configurations, sized by gang count and device cutout. Search by gang size, device type or NEMA weatherproof rating.
Browse →Electro-Mechanical Actuators
Electric linear and rotary actuators converting motor rotation into controlled linear or angular motion for positioning, lifting and process automation, sized by stroke length, thrust force and duty cycle. Search by stroke and load, or describe the motion you need automated and let ChatMRO match the right actuator.
Browse →Electrodes And Probes
pH, ORP, conductivity and level sensing electrodes and probes sized by measurement range, junction type and body material, for process and laboratory instrumentation. Search by measurement type and connector style, or describe the process fluid being monitored.
Browse →Electromagnetic and Electromechanical Locks
Fail-safe magnetic locks, fail-secure electric strikes, and electromechanical bolt locks for access-controlled doors, sized by holding force and matched to fire/life-safety requirements. Search by holding force, voltage and mounting style, or describe the door and access control system.
Browse →Electromagnetic Lifts
Electromagnetic lifting magnets for moving steel plate, scrap, and round or irregular ferrous stock, sized by lifting capacity, power source and material surface condition. Search by capacity, application or power type and let ChatMRO match the right lift.
Browse →Electromagnetic Lock Activation Devices
Request-to-exit sensors, push-button releases, key switches and access control interfaces that trigger or release electromagnetic door locks. Search by device type and voltage, or describe the door and access control system and let ChatMRO match the part.
Browse →Electromagnetic Lock Power Supplies
Regulated DC power supplies purpose-built to drive electromagnetic door locks in access control systems, sized by output voltage, current capacity and number of lock outputs. Search by voltage and amperage, or describe the lock and access control panel and let ChatMRO match the right power supply.
Browse →Electromechanical Timers
Motor-driven and cam-actuated electromechanical timers for repeatable, non-programmable process timing, sized by timing range and contact configuration. Search by timing range and mounting style, or describe your control application.
Browse →Electronic and Laser Leveling Kits
Rotary and line laser leveling kits with tripods, receivers and mounting accessories for construction grading, layout and installation alignment. Search by laser type, range and accuracy, or describe the leveling task and let ChatMRO match the kit.
Browse →Electronic Ballasts
Solid-state ballasts that regulate current and supply starting voltage to fluorescent, HID and induction lamps, sized by lamp type, wattage and ballast factor. Search by lamp count and input voltage, or describe the fixture and let ChatMRO match the right ballast.
Browse →Electronic Digital Indicators
Digital dial and lever test indicators with electronic LCD readout for dimensional inspection, sized by measuring range and resolution, with data output for SPC. Search by range and mounting stem, or describe the inspection setup.
Browse →Electronic Ear Muffs and Ear Plugs
Electronic ear muffs and ear plugs that amplify ambient sound and speech while compressing or clipping harmful impulse and continuous noise, for use on ranges, job sites and in industrial settings. Search by NRR rating and feature set, or describe the noise environment and let ChatMRO match the right protection.
Browse →Electronic Flowmeters
Magnetic, ultrasonic and turbine electronic flowmeters for liquid and gas process flow measurement, with 4-20mA, pulse and digital output options. Search by measurement technology, pipe size and fluid type.
Browse →Electronic Motor Starters
Solid-state soft starters and variable frequency drives that ramp motor starting current and torque electronically, reducing mechanical and electrical stress compared to across-the-line starting. Search by motor HP and voltage, or describe the motor application and let ChatMRO match the starter.
Browse →Electronic Siren Systems
Electrically driven warning siren systems used for emergency notification, evacuation alerts and facility signaling, sized by acoustic wattage and audible range. Search by wattage, mounting style or activation method, or describe the coverage area and application.
Browse →Electronic Timers
Panel-mount and DIN-rail electronic timers for delay-on, cyclic and interval timing control, sized by timing range and output contact rating. Search by timing function, mounting style or voltage.
Browse →Electronic Torque Meters
Digital torque meters and torque testers used to measure applied torque or verify torque wrench calibration, sized by torque range and accuracy class. Search by range and drive size, or describe your calibration or verification task and let ChatMRO match the instrument.
Browse →Electronic Torque Wrenches
Digital torque wrenches with electronic readout, audible/visual signal at target torque, and angle measurement for torque-to-yield fastening, sized by drive and torque range. Search by torque range and accuracy class, or describe the fastening application.
Browse →Electronics, Appliances and Batteries
Industrial and facility electronics, appliances and replacement battery packs spanning backup power, portable equipment and instrumentation. Search by battery chemistry, voltage or appliance function.
Browse →Electrostatic Air Filters
Washable, reusable electrostatic air filters that use a self-charging synthetic media to capture airborne particles without disposable replacement cycles. Search by nominal size, MERV rating and frame material, or describe the HVAC system and let ChatMRO match the right filter.
Browse →Emergency Exit Door Alarms
Alarmed exit hardware and standalone door alarm kits that sound when a designated exit or emergency door is opened, deterring unauthorized use while remaining code-compliant for emergency egress. Search by mounting type, decibel rating and door hardware compatibility, or describe the door and let ChatMRO match the alarm.
Browse →Emergency Eye Wash and Shower Accessories
Replacement parts, activation valves, signage and covers for emergency eye wash and safety shower stations, engineered to meet ANSI Z358.1 flow and activation requirements. Search by component type and station compatibility.
Browse →Emergency Eye Wash Stations
Emergency eyewash and eye/face wash equipment meeting ANSI/ISEA Z358.1 requirements for flushing chemical or particulate contamination from eyes, specified by mounting type and flow duration. Search by plumbed vs. portable, or describe the hazard and let ChatMRO match the station.
Browse →Emergency Lighting Batteries
Replacement NiCd, NiMH and sealed lead-acid battery packs for emergency lighting and exit sign fixtures, sized to voltage, capacity and connector type. Search by fixture brand and battery type, or describe the fixture you're servicing and let ChatMRO match the right battery.
Browse →Emergency Lighting Fixtures
Emergency lighting fixtures provide illumination along egress paths for a code-mandated duration after normal power fails, using an integral battery pack or a central inverter system. Search by lumen output, battery runtime, and mounting type, or describe the space you're lighting and let ChatMRO match the right fixture.
Browse →Emergency Lighting Lamp Heads
Adjustable LED and halogen lamp heads for emergency lighting units and exit fixtures, in single and dual-head configurations with swivel mounts. Search by lamp type and wattage, or describe the fixture being serviced and let ChatMRO match the lamp head.
Browse →Emergency Stop Push Buttons with Contact Block
Mushroom-head emergency stop push buttons paired with normally closed/normally open contact blocks, used to hard-wire machine safety stop circuits, specified by contact configuration and reset style rather than button color alone. Search by contact configuration, mounting hole size or reset type, or describe the machine safety circuit.
Browse →Enclosure Accessories
Hardware and fittings that outfit an electrical or control enclosure — hinges, latches, mounting panels, gaskets and cable glands — sized and rated to match the enclosure's NEMA/IP rating. Search by accessory type, material and mounting style.
Browse →End Mill Sets
Boxed sets of square, ball-nose and corner-radius end mills in graduated diameters, in carbide and high-speed steel, for milling slots, profiles and pockets. Search by flute count and material, or describe the workpiece material and operation and let ChatMRO match the set.
Browse →Energy Management Accessories
Occupancy/vacancy sensors, programmable timers, submetering CTs and controller accessories that extend building energy management and lighting control systems. Search by accessory type and system compatibility, or describe the energy control task you're setting up.
Browse →Energy Recovery Ventilators
Balanced ventilation units that exchange heat and moisture between incoming outdoor air and outgoing exhaust air through an enthalpy core, sized from 50 CFM residential units to several thousand CFM commercial rooftop systems. Search by airflow capacity and core type, or describe the building and climate and let ChatMRO match the ERV.
Browse →Engine Lathes
Manual metal-turning lathes with a rigid bed, leadscrew-driven carriage and geared headstock, used for general turning, facing, threading and boring work. Search by swing over bed, distance between centers or spindle bore, or describe the workpiece and thread cutting needs.
Browse →Engine Specialty Tools
Purpose-built engine service tools — timing chain and belt tools, compression and leak-down testers, valve spring compressors and piston ring tools — sized to specific engine platforms and bore diameters. Search by tool function or engine family, or describe the repair and let ChatMRO match the tool.
Browse →Engine Stands and Cranes
Rotating engine stands and folding hydraulic engine cranes for automotive and small-engine repair, rated by weight capacity and boom reach. Search by capacity and engine weight, or describe the engine being serviced and let ChatMRO match the equipment.
Browse →Engineer, Drilling and Blacksmith Hammers
Heavy-head striking hammers for forging, drilling/demolition and general engineering work, sized by head weight and handle length, in forged steel heads with wood, fiberglass or steel handles. Search by head weight and application, or describe the striking task and let ChatMRO match the hammer.
Browse →Engraving Tools
Manual, rotary and vibrating engraving tools for marking metal, wood, plastic and glass, sized by tool type, bit material and power source. Search by application, bit type or power source and let ChatMRO match the right tool.
Browse →Entrance Mats
Scraper-style and wiper-style entrance mats sized to trap grit and moisture at building entries, indexed by backing material, pile construction and traffic class. Search by size, backing and slip rating, or describe the entryway and let ChatMRO match the mat.
Browse →Environmental Meters
Handheld instruments for measuring air quality, sound level, light, humidity and weather conditions, used for compliance testing and facility monitoring. Search by parameter measured and accuracy class, or describe the survey and let ChatMRO match the meter.
Browse →EPDM Tubing
Ethylene propylene diene monomer (EPDM) tubing for hot water, steam condensate, ozone and outdoor weather exposure, resistant to UV, ozone and polar fluids where nitrile and PVC degrade. Search by ID, wall thickness and durometer, or describe the fluid and temperature range.
Browse →Equipment & Safety Labels
Pre-printed and custom labels for machine identification, hazard warnings, arc flash notices and lockout points, in vinyl, polyester and metal-photo materials rated for indoor and outdoor equipment exposure. Search by hazard type and label material, or describe the equipment being labeled and let ChatMRO match the right label.
Browse →Ergonomic Workbenches
Height-adjustable workbenches with manual crank, pneumatic or electric lift mechanisms, in laminate, steel and ESD-safe worksurfaces, for assembly, inspection and lab workstations. Search by adjustment type and worksurface size, or describe the task and let ChatMRO match the bench.
Browse →Escape Hoods and Respirators
Emergency escape hoods and respirators providing short-duration protection from smoke, toxic gases and particulates during evacuation, sized by filter type and rated escape duration. Search by hazard type and required duration, or describe the evacuation scenario and let ChatMRO match the hood.
Browse →ESD and Cleanroom Chairs
Static dissipative and cleanroom-rated task chairs built for electronics assembly and controlled environments, sized by ISO cleanroom class and grounding method. Search by grounding type and cleanroom class, or describe your workstation setup.
Browse →Ethernet Switches
Managed, unmanaged and industrial-rated Ethernet switches for network infrastructure and machine connectivity, sized by port count and switching speed. Search by port count, PoE requirement or DIN-rail industrial rating.
Browse →Ethyl Vinyl Acetate (EVA) Tubing
Flexible, clear EVA (ethylene vinyl acetate) tubing for low-pressure fluid transfer, protective sleeving and medical/food-adjacent applications where PVC's plasticizers are a concern. Search by inner diameter or wall thickness and let ChatMRO match the tubing.
Browse →Evaporative Cooler Motors
Direct-drive and belt-drive motors sized for evaporative (swamp) cooler blowers, in 1/4 HP to 1 HP frame sizes with single or multi-speed windings. Search by horsepower, voltage and shaft configuration, or describe the cooler nameplate and let ChatMRO match the motor.
Browse →Evaporative Cooler Pads
Rigid cellulose and aspen fiber evaporative cooler pads sized to standard residential swamp cooler and industrial evaporative cooling system openings, in 4-inch, 6-inch and 8-inch thicknesses. Search by pad material, thickness or cabinet size.
Browse →Evaporative Coolers
Air-cooling units that lower temperature through water evaporation rather than mechanical refrigeration, effective in hot, dry climates at a fraction of the operating cost and complexity of standard AC. Search by CFM airflow, coverage area or portability, or describe the space being cooled.
Browse →Excess Flow Valves
Automatic shutoff valves that close when gas flow exceeds a preset trip rate, protecting supply lines against uncontrolled release from a downstream line break or appliance failure. Search by pipe size and trip flow rate, or describe the supply line you're protecting.
Browse →Exhaust Rain Caps
Weather caps that mount over a vertical exhaust stack to block rain and debris from entering while allowing exhaust gas to flow, sized to stack outside diameter. Search by diameter, cap style and material.
Browse →Exit Device Trims
Outside trim kits for panic and fire exit hardware — lever, pull and knob styles in keyed, dummy and electrified functions, sized to rim, mortise, surface vertical rod and concealed vertical rod exit devices. Search by device series, trim function or finish.
Browse →Exit Devices
Rim, mortise and vertical rod panic exit devices for life-safety egress on commercial doors, rated for fire and non-fire door applications per door width and configuration. Search by device type and door application, or describe the door and let ChatMRO match the exit device.
Browse →Exit Sign and Light Combinations
LED combination units pairing an illuminated exit sign with battery-backed emergency lighting heads, UL 924 listed for code-required egress lighting. Search by power configuration and mounting style, or describe the building type and let ChatMRO match the right unit.
Browse →Expansion Joints
Rubber, metal bellows and fabric expansion joints that absorb thermal movement, vibration and misalignment in piping and ductwork systems. Search by pipe size, material and connection type, or describe the system you're isolating.
Browse →Expansion Shields
Wedge and split-type expansion shield anchors that expand against a drilled hole in concrete or masonry to anchor lag screws or machine bolts. Search by anchor size, material and shield style, or describe the base material and fastener and let ChatMRO match a shield.
Browse →Extension Cord Reels
Retractable, hand-crank and portable reels that store extension cords cleanly and pay out cable to the work area without tangling. Search by cord length, gauge and mounting type, or describe the amperage and reach you need.
Browse →Extension Cords
Heavy-duty indoor and outdoor extension cords in standard gauges and lengths, specified by wire gauge (AWG), amperage rating and jacket type for the environment and load. Search by amp draw and cord length and let ChatMRO match a compliant cord.
Browse →Extension Ladders
Extension ladders are two or more sliding sections that extend to reach heights beyond a single fixed ladder, rated by ANSI duty class for maximum working load. Search by extended length, duty rating, and material, or describe the reach and load you need and let ChatMRO match the right ladder.
Browse →Exterior Paints
Acrylic latex, elastomeric and alkyd exterior coatings formulated for UV, moisture and temperature-cycling resistance on siding, masonry, metal and industrial substrates. Search by resin type, sheen and substrate, or describe the surface and exposure and let ChatMRO match the coating.
Browse →Extra Long Drill Bits
Aircraft-length, taper-length and jobber-extended twist drills for reaching deep holes beyond standard jobber length, in HSS and cobalt for steel, aluminum and stainless. Search by overall length and hole depth, or describe the reach you need.
Browse →Extracting Tools
Spiral flute screw extractors, bolt/stud extractor sockets, and bearing/gear pullers for removing broken, stripped or seized fasteners and press-fit components. Search by extractor type and size range, or describe the fastener or part you're removing.
Browse →Extrication and Rescue Gloves
Cut- and puncture-resistant gloves certified to NFPA 1951 for technical rescue and extrication work, built with reinforced palms and knuckle protection for handling sharp metal and glass. Search by cut level and certification, or describe the rescue discipline and let ChatMRO match the glove.
Browse →Faceshield Assemblies
Complete faceshield assemblies pairing a headgear frame with a polycarbonate, propionate, or mesh visor window, rated to ANSI Z87.1 impact and optical standards. Search by visor material and headgear style, or describe the hazard and let ChatMRO match the assembly.
Browse →Fall Protection Kits
Complete fall arrest kits pairing a full-body harness, lanyard or self-retracting lifeline, and anchor connector sized to the work height and fall clearance available. Search by harness style, lanyard type and anchor connection, or describe the work-at-height task and let ChatMRO match the right kit.
Browse →Fall Rescue Devices
Controlled descent devices, rescue winches and self-rescue kits used to safely lower or retrieve a fallen or suspended worker after a fall arrest event, meeting ANSI Z359.4 requirements. Search by device type, rated capacity or descent length, or describe the fall protection application and let ChatMRO match the right device.
Browse →Fan and Limit Controls
Combination fan and limit switches that turn a furnace blower on and off by temperature and shut down the burner if plenum temperature exceeds a safe limit, sized by temperature range and mounting configuration. Search by temperature setpoint range and mount style, or describe the furnace and let ChatMRO match the control.
Browse →Fan Coil Thermostats
Wall-mounted thermostats purpose-built for 2-pipe and 4-pipe fan coil units, controlling fan speed staging and valve actuation for chilled/hot water HVAC systems. Search by pipe configuration and control type, or describe the FCU system and let ChatMRO match the right thermostat.
Browse →Fan Speed Control
Fan speed controls regulate motor speed on HVAC, exhaust and industrial fans, specified by control method (variable transformer, triac, VFD), voltage and compatible motor type (PSC, shaded pole, ECM, three-phase).
Browse →Farm Duty Motors
Farm duty AC motors built with sealed bearings, corrosion-resistant paint and higher service factor for grain augers, ventilation fans and livestock equipment. Search by horsepower, enclosure type and voltage, or describe the application and let ChatMRO match the motor.
Browse →Fast Acting Midget Fuses
Fast-acting (fast-blow) midget fuses in the standard 13/32 x 1-1/2 inch body size, used for control circuit and semiconductor protection where instantaneous overcurrent response is required. Search by amperage and voltage rating, or describe the circuit and let ChatMRO match the fuse.
Browse →Fastener Assortments
Organized kits of commonly needed nuts, bolts, screws and washers in mixed sizes, sold in cabinets or cases for shop and field fastener stock. Search by fastener types included and piece count, or describe your typical fastener needs and let ChatMRO match the right assortment.
Browse →Faucet Accessories
Repair and replacement components for commercial and residential faucets, including aerators, valve cartridges, supply lines and mounting hardware, sized by thread and connection standard. Search by component and faucet brand, or describe the repair you're making.
Browse →Faucet Repair Parts
Faucet cartridges, stems, seats, washers and O-ring kits matched to specific valve type — compression, cartridge, ball or ceramic disc — rather than sold as universal parts. Search by faucet brand/model or valve type and let ChatMRO match a repair kit.
Browse →Feeler Gauge Sets
Feeler gauge sets measure small gaps and clearances with a set of precision-ground metal blades, specified by thickness range, blade material and style (flat, wire, taper) for automotive, machining and mechanical inspection tasks.
Browse →Feeler Gauges
Precision-ground steel blade and wire-type feeler gauges for measuring gaps and clearances, sold as folding leaf sets or individual blades in metric and imperial gradations. Search by thickness range or leaf count, or describe the clearance you're checking.
Browse →Felt Sheets and Strips
Wool, synthetic (polyester/acrylic) and blended felt in sheet and strip form, from soft F1 grade to hard F5 industrial grade, with plain or pressure-sensitive adhesive backing. Search by material, thickness and hardness grade, or describe the sealing or cushioning application and let ChatMRO match the stock.
Browse →Fiber Optic Adapters
SC, LC, ST, FC and MTP/MPO coupler adapters that join two fiber optic connectors end-to-end for patch panels, splice enclosures and equipment ports. Search by connector type and fiber mode, or describe the panel you're building out.
Browse →Fiber Optic Patch Cords
Single-mode and multi-mode fiber optic patch cords in LC, SC, ST and MTP/MPO connector styles, for data center, telecom and industrial network connections. Search by connector type and fiber mode, or describe the equipment being connected and let ChatMRO match the cable.
Browse →Fiber Optic Sensors
Fiber optic photoelectric sensors combining a remote fiber cable with a separate amplifier unit, used for detecting small parts and operating in confined or high-EMI spaces, sized by sensing mode and fiber type. Search by detection distance and target size, or describe the sensing application and let ChatMRO match the sensor.
Browse →Fiberglass Grating
Molded and pultruded FRP grating panels for corrosive-environment walkways, platforms and trench covers, in isophthalic, vinyl ester and phenolic resin systems. Search by mesh pattern, resin type or load rating, or describe the environment and let ChatMRO match the right panel.
Browse →Fiberglass I-Beams
Pultruded fiberglass reinforced plastic (FRP) I-beams in vinyl ester and isophthalic polyester resin systems, engineered as a corrosion-resistant, non-conductive alternative to steel structural beams. Search by beam depth and flange width, or describe the structural application and let ChatMRO match the right beam.
Browse →Fiberglass Rod Stock
Pultruded fiberglass reinforced plastic (FRP) round rod in polyester and vinyl ester resin systems, from 1/8" to 2" diameter, offering high strength-to-weight and electrical non-conductivity. Search by diameter and resin type, or describe the application and let ChatMRO match the right rod stock.
Browse →Fiberglass Sheets Film and Flat Stock
Fiberglass-reinforced plastic (FRP) sheet, thin film and flat laminate stock for structural panels, electrical insulation and corrosion-resistant surfaces, sized by resin type, thickness and reinforcement style. Search by resin system, thickness or application and let ChatMRO match the right stock.
Browse →Fiberglass Tube Stock
Fiberglass-reinforced plastic (FRP) round tube stock in polyester, vinyl ester and epoxy (G10/G11 electrical grade) resin systems, sized by ID, OD and wall thickness. Search by resin type and dimensions, or describe the mechanical or electrical application.
Browse →File Cabinet & Cam Locks
Cylinder cam locks for filing cabinets, drawers, mailboxes and enclosure doors, sized by cylinder diameter and cam throw length. Search by keying type and mounting hole size, or describe the cabinet you're securing and let ChatMRO match the lock.
Browse →Filter Cartridges
Replacement filter elements for hydraulic, pneumatic, water and process filtration systems, spanning micron ratings from sub-micron coalescing media to coarse strainer-grade elements. Search by housing brand, part number or micron rating, or describe the fluid and flow rate and let ChatMRO match the cartridge.
Browse →Filter Heads
Filter heads are the mounting housings that plumb into a hydraulic or fluid circuit and accept a spin-on or cartridge filter element, providing the porting, bypass valve and mounting interface. Search by port configuration and pressure rating, or describe the circuit and ChatMRO matches the right head.
Browse →Filter Housings
Bag and cartridge filter housings for liquid filtration, sized by flow rate and rated working pressure rather than connection size alone, with material selected for process fluid compatibility. Search by flow rate and filtration media type and let ChatMRO match a housing.
Browse →Filter Media Rolls
Continuous roll-form filter media cut to size on-site for HVAC intake filtration, paint booth exhaust and general dust collection, sold by width, thickness and filtration efficiency rating. Search by media type and MERV rating, or describe the application and airflow requirement.
Browse →Filter Papers and Extraction Thimbles
Qualitative and quantitative (ashless) cellulose filter papers plus cellulose and glass fiber Soxhlet extraction thimbles for gravimetric analysis and solvent extraction. Search by grade, pore/particle retention and diameter, or describe the analytical method and let ChatMRO match the consumable.
Browse →Filter Regulator Lubricators
Combination filter-regulator-lubricator (FRL) units conditioning compressed air before it reaches pneumatic tools and equipment, specified by port size, flow rate (SCFM) and filter micron rating. Search by port size or describe the pneumatic application and let ChatMRO match the FRL unit.
Browse →Filter Regulator Lubricators (FRL)
Compressed air filter-regulator-lubricator (FRL) combination units and individual components that clean, pressure-regulate and lubricate air supply to pneumatic tools and equipment, sized by port size and flow capacity. Search by port size and configuration, or describe the pneumatic system you're feeding and let ChatMRO match the right FRL.
Browse →Filter Regulators
Combination filter/regulator (FR) units that remove particulates and moisture from compressed air while regulating downstream pressure in a single housing. Search by pipe size, filtration rating and pressure range, or describe the pneumatic circuit and let ChatMRO match the right unit.
Browse →Filter Replacement Parts, Accessories and Service Kits
Replacement seals, gaskets, housing wrenches and complete rebuild kits for servicing filter housings across air, fuel, hydraulic, water and process filtration systems. Search by filter housing brand/model, part type or service interval, or describe the system and let ChatMRO match the part.
Browse →Filter Systems
Multi-stage water filtration systems, industrial air filtration units and process filter housings, sized by flow rate and micron rating for potable, process and compressed air applications. Search by system type, flow rate or filtration stage.
Browse →Filtration Systems
Cartridge, bag, and multimedia filtration systems for liquid and air process streams. Search by micron rating, flow rate, housing material, or filtration application.
Browse →Finger Cots
Single-finger protective sheaths that cover one or more fingers for fine manual tasks requiring dexterity a full glove would compromise, available in latex, nitrile and vinyl with ESD-safe and powder-free options for electronics and cleanroom work. Search by material, size and ESD rating, or describe the task and environment and let ChatMRO match the right finger cot.
Browse →Finishing Nails
Small-headed finishing nails for trim, millwork and cabinetry, sized by gauge and length so the head sets flush and disappears beneath wood filler. Search by gauge and material, or describe the trim application and let ChatMRO match the nail.
Browse →Fire Alarm Control Panels
Addressable and conventional fire alarm control panels sized by zone or point capacity for commercial and industrial life-safety systems. Search by architecture type and capacity, or describe the building and let ChatMRO match the panel.
Browse →Fire Alarm System Components
Smoke and heat detectors, pull stations, horn/strobes and control panel components for commercial fire alarm systems built to NFPA 72 requirements. Search by device type and system compatibility, or describe the building application.
Browse →Fire and Rescue Fans
Positive pressure ventilation (PPV) fans used by fire and rescue crews to clear smoke and hot gases from structures during and after firefighting operations. Search by airflow capacity and drive type, or describe the application and let ChatMRO match the fan.
Browse →Fire and Rescue Helmets
NFPA 1971-compliant structural firefighting helmets and NFPA 1951-compliant technical rescue helmets, sized by shell material and suspension configuration. Search by application (structural/wildland/rescue) and compliance standard, or describe the department's needs and let ChatMRO match the helmet.
Browse →Fire and Smoke Dampers
UL-listed fire dampers, smoke dampers and combination fire/smoke dampers for HVAC duct penetrations through fire-rated walls and floors, in curtain, multi-blade and dynamic configurations. Search by duct size and fire rating, or describe the wall/floor assembly and let ChatMRO match the damper.
Browse →Fire Extinguisher Brackets
Wall-mount hooks, vehicle brackets, marine mounts and cabinet brackets sized to match specific fire extinguisher weight classes and body diameters. Search by extinguisher size (lb) and mounting type, or describe where the extinguisher will be installed.
Browse →Fire Extinguisher Cabinets
Surface-mount, semi-recessed and fully recessed fire extinguisher cabinets in steel and aluminum, sized to standard extinguisher capacities and code-required visibility requirements. Search by mounting style and extinguisher size, or describe the wall and extinguisher and let ChatMRO match the right cabinet.
Browse →Fire Extinguishers
Portable fire extinguishers rated by fire class (A, B, C, D, K) and agent type — dry chemical, CO2, clean agent, wet chemical — sized to occupancy hazard and coverage area. Search by fire class and facility type, or describe the hazard you're protecting.
Browse →Fire Hose and Hydrant Adapters
Brass and aluminum adapters that connect mismatched fire hose and hydrant threads — NST, NPSH and storz couplings — across departments, equipment and jurisdictions with differing thread standards. Search by thread standard, size and material, or describe the two connections you need to mate and let ChatMRO match the adapter.
Browse →Fire Hose and Hydrant Valves
Gate, ball, and angle-style hose and hydrant valves in NST (NH), NPSH, and Storz couplings, sized 1.5 in to 6 in for standpipe, hydrant and fire pump connections. Search by thread standard and valve type, or describe the connection and let ChatMRO match the right valve.
Browse →Fire Hose Reels and Storage Racks
Reels and racks used to store, deploy and retrieve fire hose in industrial, marine and municipal fire protection systems, sized by hose diameter and length capacity. Search by reel type, mounting style and hose capacity, or describe the fire protection system layout.
Browse →Firefighter Gloves
Structural and wildland firefighting gloves built to NFPA 1971 with a thermal barrier, moisture barrier and abrasion-resistant outer shell, sized for dexterity under turnout gear. Search by NFPA compliance, cuff style or size, or describe the fireground task.
Browse →Firestop Sealants, Caulks and Putties
Firestop sealants, caulks and putties seal penetrations through fire-rated walls and floors — cable, conduit and pipe penetrations — restoring the assembly's fire resistance rating per UL-listed system designs. Search by fire rating and penetrant type, or describe the assembly and ChatMRO matches the right compound.
Browse →Fixed Gas Detectors
Permanently installed gas detection sensors that continuously monitor for combustible gas, toxic gas or oxygen deficiency in a fixed location, using electrochemical, catalytic bead, infrared or semiconductor sensing elements tied into a central control panel or standalone alarm. Search by gas type, sensor technology and output signal, or describe the monitored space and let ChatMRO match the right detector.
Browse →Fixed Ladders
Permanently mounted vertical access ladders for roofs, mezzanines, tanks and platforms, built to OSHA 1910.23 requirements for rung spacing, side rail strength and fall protection above 24 feet. Search by height, material and cage or ladder safety system requirement.
Browse →Flame Resistant and Arc Flash Coveralls
Flame-resistant and arc-rated coveralls sized by cal/cm2 arc rating and fabric type, for electrical, oil and gas, and industrial hazard environments. Search by arc rating and hazard category, or describe your PPE program and let ChatMRO match the coverall.
Browse →Flame Resistant and Arc Flash Hats and Headwear
Flame-resistant and arc-rated headwear — balaclavas, hard hat liners, winter liners and caps — worn under or with a hard hat to protect the head, neck and face from arc flash thermal exposure, with an arc rating (ATPV or EBT) tested to the same standards as FR clothing. Search by arc rating, fabric type and hard hat compatibility, or describe the required PPE category and let ChatMRO match the right headwear.
Browse →Flammable Cabinets
Steel storage cabinets built to OSHA 1910.106 and NFPA 30 requirements for storing flammable and combustible liquids in the workplace, specified by capacity and door configuration. Search by gallon capacity or door type, or describe your storage need and let ChatMRO match the cabinet.
Browse →Flange Alignment Tools
Flange alignment pins, wedges and jack screws for aligning bolt holes and mating faces on pipe flanges before bolt-up, sized to common flange bolt-circle diameters. Search by tool type and flange size range, or describe the pipe class and bolt pattern and let ChatMRO match the tool.
Browse →Flange Bolts
Hex and serrated flange head bolts with an integral washer-like flange under the head, used where a separate flat washer would be impractical or where the serrations resist loosening under vibration. Search by head style, thread size and grade, or describe the joint you're fastening.
Browse →Flange Nuts
Hex flange nuts with a wide integral bearing washer face, serrated or non-serrated, sized to eliminate the need for a separate washer under the fastener. Search by thread size and grade and let ChatMRO match a flange nut to your joint.
Browse →Flangette Bearings
Split and solid 2-bolt flangette (flange) bearing units for supporting rotating shafts in conveyor, agricultural and general machinery applications. Search by bore size and mounting style, or describe your shaft diameter and mounting surface.
Browse →Flap Discs
Type 27 and Type 29 flap discs in zirconia alumina, ceramic and aluminum oxide grain for angle grinder blending, deburring and finishing on metal. Search by grit, grain type and disc diameter, or describe the finishing task.
Browse →Flare Nut Wrenches
Flare nut (line) wrenches with a partially closed jaw that grips flared tube fitting nuts on more sides than an open-end wrench, sized in SAE and metric to match brake, fuel and hydraulic line fittings. Search by size and drive style, or describe the fitting and let ChatMRO match the right wrench.
Browse →Flared Tube Fittings
37-degree JIC and 45-degree SAE flare tube fittings for hydraulic, fuel, and refrigeration lines, sized by tube OD and thread standard. Search by flare angle, tube size and material, or describe the line and let ChatMRO match a fitting.
Browse →Flaring & Swaging Tools
Flaring tools for forming 45-degree SAE and 37-degree JIC flares, and swaging tools for expanding tube ends to create solder-free lap joints, in manual, hydraulic and pneumatic drive styles. Search by flare type and tube size range, or describe the connection you're making.
Browse →Flashlight Accessories
Batteries, chargers, holsters, mounts, diffusers and color filters for handheld and headlamp flashlights used in industrial, tactical and emergency service applications. Search by accessory type and flashlight compatibility.
Browse →Flashlight Replacement Bulbs
Incandescent, krypton and LED replacement bulbs sized to fit standard flashlight bulb bases, matched by voltage, base type and bulb diameter rather than by flashlight brand alone. Search by base type and voltage, or describe the flashlight model and let ChatMRO match the bulb.
Browse →Flat Washers
Flat washers that spread a fastener's clamping load over a wider bearing surface and protect the joint material from damage during tightening. Search by inner diameter, thickness and material, or describe your fastener size and application and let ChatMRO match the right washer.
Browse →Fleet and Vehicle Maintenance
Preventive maintenance parts, fluids and shop supplies for commercial fleet servicing, from filters and fluids to brake and undercarriage components. Search by vehicle class and service task, or describe the maintenance job and let ChatMRO match the part.
Browse →Flex Coupling Hubs
Machined hubs that mount to a shaft and mate with a flexible element — jaw spider, gear teeth or disc pack — to transmit torque between two shafts while accommodating minor misalignment. Search by bore size, coupling type and torque rating, or describe the shafts you're connecting and let ChatMRO match the hub.
Browse →Flex Coupling Inserts
Elastomeric spider inserts for jaw-type flexible couplings, sized to standard coupling frame sizes and available in multiple durometer ratings for shock absorption and torque capacity tuning. Search by coupling size, durometer and spider shape, or describe the drive you're maintaining.
Browse →Flexible Barrier Systems
Polymer flexible barriers that deflect and rebound on impact from forklifts and pallet jacks, rather than transferring impact force to the floor anchor like rigid steel guardrail. Search by impact rating and mounting style, or describe the traffic area and let ChatMRO match the barrier.
Browse →Flexible Cylinder Hones
Flexible, ball-tipped abrasive hones used to deglaze and finish cylinder bores, hydraulic cylinder bores and valve guides, sized to bore diameter and available in a range of grit for different finish requirements. Search by bore size and grit, or describe the bore application and let ChatMRO match the right hone.
Browse →Flexible Ducts
Insulated and non-insulated flexible ducting in aluminum, polyester and wire-helix construction, sized 3" to 20" diameter for HVAC supply, return and dryer venting. Search by diameter and insulation R-value, or describe the airflow application and let ChatMRO match the right duct.
Browse →Flexible Fittings
Braided metal hose, rubber expansion joints and flexible pipe connectors absorbing vibration, thermal movement and slight misalignment between rigid piping and equipment. Search by connection size and media, or describe the piping application and let ChatMRO match the fitting.
Browse →Flexible Gas Hoses
Corrugated stainless steel flexible gas connectors for natural gas and propane appliance hookups, sized by diameter and length with matched end fittings. Search by gas type, diameter and fitting configuration, or describe the appliance you're connecting.
Browse →Flexible Impeller Pedestal Pumps
Belt-driven or PTO-mounted pumps using a flexible rubber impeller mounted on a fixed pedestal base, self-priming and gentle enough to transfer fluids containing solids without shearing or damaging them the way a centrifugal pump would. Search by impeller material, drive type and port size, or describe the fluid and flow rate and let ChatMRO match the right pump.
Browse →Flexible Metal Hoses
Corrugated stainless steel flexible hose with single or double braid reinforcement, for high-temperature, high-pressure and chemically demanding fluid transfer where rubber or thermoplastic hose is unsuitable. Search by diameter and pressure rating, or describe the fluid and temperature and let ChatMRO match the right hose assembly.
Browse →Float Balls
Hollow plastic and metal float balls used in mechanical float valves, level switches and tank level indicators. Search by diameter and thread/mount type, or describe the tank and fluid and let ChatMRO match the float.
Browse →Float Switches
Mechanical liquid-level switches that change electrical state as a floating sensor rises or falls with fluid level, used to control pumps and trigger high/low level alarms. Search by mounting style and cable length, or describe the tank and let ChatMRO match the switch.
Browse →Float Valves
Mechanical float valves that regulate liquid level by opening and closing flow in direct response to a rising or falling float, without electrical power. Search by pipe size, float material and mounting style, or describe the tank and let ChatMRO match the right valve.
Browse →Floor & Table Fans
Portable floor, table and pedestal fans for spot cooling and air circulation in shops, warehouses and offices. Search by fan diameter or airflow rating and let ChatMRO match the fan.
Browse →Floor Box Covers
Flip-lid, flush and recessed carpet-flange covers for floor-mounted electrical and communications boxes in commercial flooring. Search by floor box brand/series and cover finish, or describe the floor type and box you're covering.
Browse →Floor Boxes
In-floor electrical and data outlet enclosures for poured concrete, raised access flooring and carpeted floors, providing power, data and AV connectivity at floor level. Search by mounting type, gang configuration or load rating, or describe the flooring type and let ChatMRO match the right box.
Browse →Floor Grinders
Single-head and planetary floor grinders for concrete surface preparation, coating removal and polishing, sized by grinding head diameter, motor power and disc RPM. Search by application or describe the concrete surface condition and let ChatMRO match the machine.
Browse →Floor Machine Pads
Round abrasive pads for rotary and orbital floor machines, color-coded by aggressiveness from light buffing through heavy stripping. Search by pad diameter, color grade, or the floor finish task you're doing.
Browse →Floor Mats
Anti-fatigue, entrance, drainage and anti-static floor mats sized and rated for specific industrial and commercial floor zones. Search by material, thickness and application, or describe the work area and let ChatMRO match the right mat.
Browse →Flow Control Check Valves
Combination flow control and check valves that restrict flow in one direction while allowing free reverse flow, used to control actuator speed in hydraulic and pneumatic circuits without needing a separate check valve. Search by flow adjustment range and connection type, or describe the circuit and let ChatMRO match the valve.
Browse →Flow Switches
Switches that detect flow above or below a set threshold in a pipe or duct and trigger an electrical output, spanning paddle, shuttle/piston and thermal dispersion sensing technologies. Search by pipe size and fluid, or describe the flow rate and let ChatMRO match the switch.
Browse →Foam Blanks, Flats, Bars, Plates and Sheet Stock
Raw polyurethane, polyethylene and neoprene foam in blanks, flats, bars, plates and sheet stock for cutting, laminating and fabricating into padding, gaskets and packaging inserts. Search by foam type and density, or describe your application and let ChatMRO match the right stock.
Browse →Foam Rubber Seals
Closed-cell and open-cell foam rubber seals in neoprene, EPDM and silicone, used as compressible gaskets and weatherstripping where a solid rubber seal would be too rigid to conform to uneven or misaligned mating surfaces. Search by foam type, cell structure and adhesive backing, or describe the sealing gap and environment and let ChatMRO match the right foam.
Browse →Foam Tape
Closed-cell polyethylene, open-cell polyurethane and neoprene foam tapes with pressure-sensitive adhesive backing, used for sealing, cushioning and gap-filling. Search by thickness and adhesive type, or describe the gap or surface you're sealing.
Browse →Foil Tapes
Aluminum and copper foil tapes with acrylic or conductive adhesive, sized 1/2" to 4" wide, for HVAC duct sealing, EMI/RFI shielding and thermal reflective applications. Search by foil material and adhesive type, or describe the application and let ChatMRO match the right tape.
Browse →Folding and Stacking Chair Carts
Mobile carts for storing and transporting folding chairs and stacking chairs between setup and storage, sized by chair capacity and chair style. Search by capacity and chair type, or describe your chair inventory and let ChatMRO match the right cart.
Browse →Folding Hand Trucks
Compact folding hand trucks and convertible dollies for moving boxes, appliances and equipment in spaces where a full-size hand truck won't fit or store, rated from 150 to 1,000+ lb capacity. Search by load capacity and folded dimensions, or describe the loads you're moving and storage constraint.
Browse →Food Mixers and Blenders
Commercial planetary mixers, spiral dough mixers and high-speed bar blenders for bakery, restaurant and food-processing use, sized by bowl capacity and motor horsepower. Search by capacity and mixing action, or describe the batch volume and food type and let ChatMRO match the equipment.
Browse →Food Service Carts
Utility carts, bussing carts, insulated hot/cold holding carts and beverage service carts in stainless steel, polymer or powder-coated steel for commercial kitchens and dining service. Search by shelf configuration and load capacity, or describe the service task and let ChatMRO match the cart.
Browse →Food Service Thermometers
Digital probe, infrared and bimetal dial thermometers for verifying food holding, cooking and cooling temperatures against HACCP requirements. Search by probe style and temperature range, or describe the checkpoint you're monitoring.
Browse →Food Waste Disposers
Food waste disposers grind food scraps for drain disposal, specified by motor horsepower, grind stage count and duty rating for residential kitchen and commercial food service applications.
Browse →Foot Switches
Momentary and latching industrial foot switches for hands-free machine actuation, with guarded and unguarded pedal styles and NEMA-rated enclosures. Search by circuit configuration, guard style and environmental rating.
Browse →Force Gauge Accessories
Test stands, grips, fixtures and attachment tips for digital and mechanical force gauges used in push/pull, compression and tensile testing. Search by fixture type and load capacity, or describe the test setup you're building and let ChatMRO match the accessory.
Browse →Force Gauges
Handheld and stand-mounted instruments that measure push and pull force in a load application, using strain-gauge or mechanical load cells, for quality control and product testing. Search by force capacity, digital vs. mechanical and accuracy class.
Browse →Forged Eye Nuts
Forged (not cast) nuts with an integral ring or eye for attaching a hook, shackle, or lifting cable, rated by working load limit for overhead lifting and anchoring use. Search by thread size, WLL, or plated/galvanized finish.
Browse →Fork Covers
Polyurethane and nylon fork covers (sleeves and boots) sized to forklift fork blade dimensions, protecting delicate and finished loads from scratches, dents and puncture during handling. Search by fork blade size and cover material, or describe the load being protected and let ChatMRO match the cover.
Browse →Fork Extensions
Slip-on fork extensions that lengthen forklift forks for handling long or bulky loads, sized by class to match the fork's cross-section and rated for reduced capacity at extended length. Search by extension length and fork class, or describe your forklift and let ChatMRO match the extension.
Browse →Fork Mounted Brush Sweepers
Rotary broom sweeper attachments that mount directly onto standard forklift forks, converting a forklift into a sweeper for yards, warehouses and paved areas without a dedicated sweeper machine. Search by sweeping width and bristle type, or describe your forklift class and surface and let ChatMRO match the attachment.
Browse →Fork Mounted Drum Handling Equipment
Fork-mounted drum rotators, grabs and lift/tilt attachments that let a forklift pick up, transport, tilt and pour standard 55-gallon drums without a dedicated drum handler. Search by attachment type and drum capacity, or describe the drum handling task.
Browse →Fork Terminals
Fork (spade) terminal connectors for crimping onto wire ends to make a quick-disconnect stud or screw-terminal connection, in insulated and non-insulated styles. Search by wire gauge and stud size, or describe the connection and let ChatMRO match the terminal.
Browse →Forklift and Attachment Accessories
Forks, carriage attachments, clamps and safety accessories for forklifts, sized by load capacity and forklift class. Search by attachment type and load rating, or describe the material you're handling.
Browse →Forklift Booms
Forklift-mounted jib booms that convert a forklift into a mobile crane for lifting loads by hook, sized by load capacity and boom extension length. Search by capacity and boom length, or describe your lift job and let ChatMRO match the boom.
Browse →Forklift Lifting Beams and Hooks
Fork-mounted lifting beams and hooks that convert a forklift into a mobile crane, rated by working load limit and sized by fork pocket dimensions and beam length. Search by capacity and reach, or describe the load you need to lift.
Browse →Forklift Work Platforms
Fork-mounted and carriage-mounted work platforms that convert a forklift into a temporary elevated work station for maintenance, stocking and overhead access. Search by weight capacity, platform size and railing configuration, or describe the elevated task and let ChatMRO match the right platform.
Browse →Frame and Trim Saws
Double miter saws, chop saws and underpinners for picture framing and moulding fabrication, sized to common frame moulding profiles. Search by cutting capacity and miter capability, or describe the moulding you're cutting.
Browse →Frequency Counters
Bench and handheld instruments that measure the frequency of an electrical signal, from audio-range counters to RF units reaching into the GHz range, with resolution and gate time selectable for the precision required. Search by frequency range and channel count, or describe the signal being measured and let ChatMRO match the counter.
Browse →Fuel and Gas Cans
Portable fuel storage cans in steel and HDPE, including self-venting safety cans, CARB-compliant spouted cans and color-coded diesel/kerosene containers. Search by capacity and fuel type, or describe the storage or dispensing need.
Browse →Fuel and Lubricant Tubing
Nitrile, PTFE, nylon and polyurethane tubing rated for continuous exposure to gasoline, diesel, oil and hydraulic fluid without swelling, cracking or permeation. Search by material, ID/OD and pressure rating, or describe the fluid and application and let ChatMRO match the tubing.
Browse →Fuel Filters
Inline, spin-on and water-separating fuel filters for diesel and gasoline engines, sized by micron rating and connection to protect injectors and carburetors from particulate and water contamination. Search by cross-reference number or connection size, or describe the fuel system.
Browse →Fuel Transfer Pump Accessories
Nozzles, hoses, meters and filters for gasoline, diesel and biodiesel transfer pumps, sized by fuel compatibility and NPT connection size. Search by fuel type and flow rate, or describe the transfer pump system you're building out.
Browse →Full Face Respirators
Elastomeric full face respirators covering the eyes, nose and mouth for combined eye and respiratory protection against particulates, gases and vapors. Search by cartridge/filter combination, NIOSH approval and facepiece material.
Browse →Fully Threaded Studs
All-thread rod and fully threaded studs, threaded along their entire length, in carbon steel, stainless and alloy grades for through-bolting and anchoring applications. Search by diameter, length and material, or describe the joint or anchoring application.
Browse →Fume Extractor Arms
Articulating source-capture arms that position a fume hood directly at the point of welding, soldering or grinding, so contaminants are captured before they disperse into the shop air. Search by arm length, hood diameter and mounting type.
Browse →Fume Extractors
Benchtop and portable fume extraction systems that capture solder smoke, welding fume and chemical vapor at the source using filtered airflow. Search by filtration type and airflow rate, or describe the process and let ChatMRO match the extractor.
Browse →Fume Hood Cabinets and Stands
Base cabinets and open stands that support a fume hood at proper working height while providing chemical storage beneath, in wood, steel and polypropylene construction rated for flammable and corrosive material storage. Search by material and storage type, or describe the fume hood and chemicals stored beneath it.
Browse →Function Generators
Bench instruments that generate configurable electrical waveforms — sine, square, triangle and arbitrary — for testing, calibrating and troubleshooting electronic circuits. Search by frequency range, channel count and waveform capability.
Browse →Furnace Ignitors and Controls
Hot surface ignitors, spark/pilot ignitors, and integrated furnace control boards sized by voltage, ignitor material and OEM cross-reference. Search by furnace brand or ignitor type, or describe the ignition system you're servicing.
Browse →Furniture, Hospitality and Food Service
Commercial-grade furniture, hospitality fixtures, and food service equipment built to NSF and commercial durability standards for restaurants, hotels, break rooms, and institutional facilities. Search by category and setting, or describe the space you're furnishing or equipping.
Browse →Fuse Blocks
Panel-mount, DIN rail and modular fuse blocks for cartridge, blade and midget fuses, in single-pole through multi-pole configurations for branch circuit and equipment protection. Search by fuse type, pole count and mounting style, or describe the circuit you're protecting.
Browse →Fuse Holders
Panel-mount, inline and blade-fuse holders that carry a replaceable fuse and provide the mechanical mounting and electrical connection points for circuit protection. Search by fuse type, mounting style and current/voltage rating, or describe the circuit you're protecting and let ChatMRO match the right holder.
Browse →Fuse Links
Fusible cutout links for overhead and pad-mounted distribution protection, rated by continuous current and time-current speed class (type K fast, type T slow). Search by amperage and cutout brand fit, or describe the circuit and let ChatMRO match the link.
Browse →Gage Blocks, Clamps & Surveillance Masters
Precision gage block sets, wringing clamps and surveillance (check) masters used to calibrate and verify dimensional measuring instruments to traceable length standards. Search by grade, material and set size, or describe the calibration application.
Browse →Galvanized Pipe
Hot-dip galvanized steel pipe in standard NPS sizes and Schedule 40/80 wall thickness, threaded or plain-end, for water distribution, structural and general MRO piping. Search by nominal size and schedule, or describe the piping run and let ChatMRO match the pipe.
Browse →Galvanized Pipe Fittings
Zinc-coated malleable iron threaded fittings — elbows, tees, couplings and unions — for connecting galvanized steel pipe in water, gas and general piping systems where corrosion resistance is needed without the cost of stainless. Search by fitting type and NPT size, or describe the piping run.
Browse →Gantry Cranes
Portable and fixed A-frame gantry cranes for lifting and moving loads without a permanent overhead structure, sized by capacity, span and lift height. Search by capacity, span width or steel vs. aluminum construction.
Browse →Garage & Dock Doors
Sectional, rolling steel and high-speed fabric doors sized for warehouse loading docks, commercial garages and industrial building openings, rated by wind load and insulation value. Search by door type and opening size, or describe the building opening and let ChatMRO match the door.
Browse →Garden Carts
Two-wheel and four-wheel garden and yard carts for hauling soil, mulch, tools and yard debris, in poly and steel-bed construction with capacities from 300 lb to over 1,000 lb. Search by capacity, wheel type and bed material.
Browse →Garden Hoes
Hand hoes for weeding, cultivating and bed preparation, sized by blade style, handle length and blade material. Search by blade type, soil condition or task and let ChatMRO match the right hoe.
Browse →Garden Hose Connectors and Adapters
Brass and plastic quick-connect couplers, repair menders, Y-splitters and thread adapters for joining, repairing and adapting garden hose to spigots, nozzles and equipment. Search by thread size or connector type, or describe the hose diameter and let ChatMRO match the fitting.
Browse →Garden Hose Reels, Carts and Hangers
Wall-mounted, freestanding cart, and portable hose reels and hangers sized by hose capacity and diameter, in resin, steel and aluminum construction. Search by hose length capacity and mount type, or describe your yard or facility layout and let ChatMRO match the reel.
Browse →Garden Hoses
Flexible water hoses for irrigation, wash-down and general water transfer, rated by internal diameter, wall construction (ply count), and burst pressure rather than by length alone. Search by diameter, length, or reinforced/commercial-duty construction.
Browse →Gas Air Compressor Combination Units
Gas-engine-driven air compressor units combining a small gasoline or diesel engine with a piston compressor pump and tank, built for jobsites and field locations without reliable electrical power. Search by CFM output, tank size and engine horsepower, or describe the tool load and let ChatMRO match the unit.
Browse →Gas Analyzer Accessories
Calibration gas kits, sample probes, filters and sample-conditioning lines for portable and fixed gas analyzers. Search by accessory type and analyzer brand and let ChatMRO match the right component.
Browse →Gas Analyzers
Instruments that measure the concentration of specific gas species — O2, CO, CO2, NOx and combustible gases — using electrochemical, infrared or catalytic sensors, for combustion tuning, emissions testing and safety monitoring. Search by gas species, sensor type and application.
Browse →Gas Connector Fitting
Flexible stainless steel gas connectors and fittings for connecting residential and commercial gas appliances to a fixed gas supply line, sized by pipe diameter and end-connection type. Search by connector size and appliance type, or describe the appliance and supply line you're connecting.
Browse →Gas Cylinder Regulators
Single-stage and two-stage pressure regulators that step down and control compressed gas cylinder pressure for welding, cutting and process gas applications. Search by gas type and CGA fitting, or describe the application and let ChatMRO match the regulator.
Browse →Gas Detection Tube and Pump Accessories
Manual bellows and piston-style sampling pumps, detector tubes and calibration accessories for colorimetric gas detection, used to spot-check specific gas concentrations in confined spaces and industrial air. Search by pump type and tube brand compatibility, or describe the target gas and concentration range and let ChatMRO match the accessory.
Browse →Gas Infrared Tube Heaters
Radiant tube heaters that burn natural gas or propane inside a long steel tube, heating objects and floor surfaces directly through infrared radiation rather than heating air, suited to high-ceiling and drafty industrial spaces where forced-air heating loses efficiency. Search by BTU output, fuel type and tube configuration, or describe the space you're heating and let ChatMRO match the right heater.
Browse →Gas Masks
Full facepiece respirators paired with NIOSH-approved filter cartridges rated for specific contaminant classes — organic vapor, acid gas, particulate — rather than sold as a generic all-purpose mask. Search by the hazard you're protecting against and let ChatMRO match a facepiece and cartridge combination.
Browse →Gas Pressure Washers
Gasoline-engine-driven pressure washers for jobsite and commercial cleaning where electrical service isn't available or higher flow and pressure are needed than electric units deliver. Search by PSI, GPM and pump type, or describe the cleaning task and let ChatMRO match the washer.
Browse →Gas Springs and Dampers
Pressurized gas struts that support, dampen or lock the motion of hinged lids, doors and hatches, sized by extended length, stroke and force rating. Search by force and stroke length, or describe the panel weight and geometry and let ChatMRO match the right strut.
Browse →Gas Tankless Water Heaters
Gas tankless water heaters heat water on demand rather than storing a heated reservoir, sized by flow rate (GPM) and temperature rise for the fuel type and climate. Search by flow rate, fuel type and venting configuration, or describe the application and ChatMRO matches the right unit.
Browse →Gas Unit Heaters
Suspended natural gas and propane unit heaters for space heating in warehouses, shops and industrial buildings, sized by BTU/hr output, venting type and mounting configuration. Search by BTU output and fuel type, or describe the space and let ChatMRO match the right heater.
Browse →Gas Valves
Manual and automatic valves rated for natural gas, propane and other fuel gas service, sized and certified to gas-specific standards distinct from general-purpose water or air valves. Search by valve type, pipe size or actuation, or describe the gas line application.
Browse →Gas Water Heaters with Tank
Storage-tank gas water heaters that heat and hold a reserve of hot water, fired by natural gas or propane, in atmospheric, power-vent and direct-vent configurations. Search by tank capacity, BTU input and venting type, or describe the building and let ChatMRO match the heater.
Browse →Gas Welder Fittings
Brass and steel fittings that connect torches, hoses and regulators in oxy-fuel welding and cutting systems, sized to CGA/CSA thread standards specific to each gas. Search by gas service, thread size or connection gender, or describe the torch or regulator you're connecting.
Browse →Gas Welding Outfits
Complete oxy-acetylene welding and cutting outfits including torch handle, welding and cutting attachments, regulators, hoses and tip sets, sized for a range of metal thicknesses. Search by torch style, tip size range or included accessories, or describe the material thickness and let ChatMRO match the right outfit.
Browse →Gas Welding Tips
Gas Welding Tips, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Gasket Cutter
Rotary gasket cutters, adjustable hand gasket cutters and hollow punches for cutting custom flat gaskets from sheet material to exact bolt-hole and bore dimensions. Search by gasket diameter range and material, or describe the flange you're gasketing and let ChatMRO match the right cutter.
Browse →Gasket Cutter Accessories
Replacement blades, cutting wheels, rollers and circle-cutting guides for hand and rotary gasket cutters used on flat gasket sheet material. Search by cutter type and blade style, or describe the gasket material you're cutting and let ChatMRO match the accessory.
Browse →Gasket Cutter and Accessories
Manual rotary gasket cutters, hole cutters and replacement blades for fabricating custom gaskets from sheet material on site. Search by cutting mechanism, maximum gasket diameter, or blade/wheel style.
Browse →Gasket Cutters
Rotary, hand-held and hollow punch gasket cutters for fabricating custom gaskets from sheet material on site. Search by cutting method and gasket material, or describe the flange size and let ChatMRO match the cutter.
Browse →Gasket Sealants and Makers
RTV silicone, anaerobic and formed-in-place gasket sealants sized by chemistry, cure time and temperature range for engine, hydraulic and flange sealing applications. Search by chemistry and application, or describe the mating surfaces and let ChatMRO match the sealant.
Browse →Gasoline Engines
Air-cooled small gasoline engines from 3.5 HP to 25+ HP, in horizontal and vertical shaft configurations, used as replacement power for pressure washers, generators, pumps, and outdoor power equipment. Search by horsepower and shaft configuration, or describe the equipment being repowered and let ChatMRO match the engine.
Browse →Gasoline Hoses
UL-listed rubber gasoline dispensing and transfer hoses for fuel pumps, fuel transfer tanks and small-engine fuel lines, rated for petroleum compatibility and specific pressure and vacuum service. Search by diameter and hose type, or describe the fuel transfer application and let ChatMRO match the hose.
Browse →Gate and Globe Valves
Gate valves for on/off isolation and globe valves for throttling, in bronze, iron and stainless steel. Search by port size and pressure class, or describe the line and service.
Browse →Gate Operators
Swing gate, slide gate and vertical lift automation operators for perimeter security, parking control and access management, sized by gate weight and duty cycle. Search by gate type and power requirement, or describe the installation and let ChatMRO match the operator.
Browse →Gauge Cocks
Small isolation valves installed between a pressure gauge and the process line, letting the gauge be shut off, blown down or removed for calibration without depressurizing the system. Search by connection size, pattern and pressure rating.
Browse →Gauge Guards
Diaphragm seal isolators that protect a pressure gauge's internals from corrosive, viscous, or particulate-laden process media, in threaded, flanged and sanitary connection styles. Search by diaphragm material and process connection, or describe the media being isolated.
Browse →Gauge Repair Tools
Service tools and replacement parts used to repair, recalibrate and restore pressure gauges, dial indicators and process gauges rather than scrapping and replacing the instrument. Search by gauge type and service function, or describe the gauge being repaired and let ChatMRO match the right tool or part.
Browse →Gauges and Electronics
Panel meters, pressure and temperature gauges, and sensor instrumentation for monitoring and controlling industrial process and machine parameters. Search by measurement type, range and output signal, or describe the process variable you're monitoring.
Browse →Gear Racks
Straight-cut and helical rack gears in steel, stainless and nylon, sized by module (metric) or diametral pitch (imperial), for linear motion and rack-and-pinion drives. Search by module, pressure angle and pinion pairing, or describe the travel and load and let ChatMRO match the rack.
Browse →Gearmotor Accessories
Mounting hardware, output couplings, torque arms and backstops that support and interface a gearmotor with driven equipment, sized to match specific gearmotor frame families. Search by accessory type and gearmotor frame size, or describe the drive configuration.
Browse →General Hand Tool Kits
Multi-piece hand tool kits combining sockets, wrenches, pliers, and screwdrivers in a fitted case for general mechanic, maintenance, and field service work. Search by piece count and case type, or describe the trade and let ChatMRO match the kit.
Browse →General Purpose DC Motors
Brushed, permanent magnet DC motors for variable-speed drive applications, in fractional to integral horsepower ratings. Search by voltage and frame size, or describe the driven load and let ChatMRO match the motor.
Browse →General Purpose Filter Elements
Pleated cellulose, synthetic and wire mesh filter elements sized to standard housing dimensions and rated from 1 to 150 micron, for hydraulic, pneumatic, and general process fluid filtration. Search by micron rating and housing size, or describe the system and let ChatMRO match the right element.
Browse →General Purpose Hand Trucks
General purpose hand trucks move boxes, drums and equipment on a wheeled frame, specified by load capacity, frame style (rigid, folding, convertible) and wheel type for warehouse, dock and facility use.
Browse →General Purpose Hydraulic Motors
Fluid-powered rotary actuators converting hydraulic flow and pressure into rotating shaft torque, sized by displacement, pressure rating and mounting configuration. Search by displacement and torque requirement, or describe the driven load and let ChatMRO match the right motor.
Browse →Generator Transfer Switches Automatic
UL 1008 listed automatic transfer switches that sense utility power loss and start/transfer load to a standby generator without operator action, in single and three-phase configurations. Search by amperage, voltage class and number of poles, or describe the generator and load you're switching.
Browse →Glass and Ceramic Drill Bits
Carbide spear-point and diamond core drill bits ground for brittle, non-metallic materials like glass, ceramic tile and porcelain, where a standard twist bit's cutting action would crack or shatter the workpiece. Search by tip type, diameter and shank style, or describe the material being drilled and let ChatMRO match the right bit.
Browse →Glove Box Gloves
Sleeved gloves for glove box isolation chambers in butyl, neoprene, hypalon and latex materials, sized to standard port diameters for controlled-atmosphere and containment work. Search by port size and glove material, or describe the chamber atmosphere and hazard and let ChatMRO match the glove.
Browse →Glove Boxes
Sealed inert-atmosphere and containment glove box enclosures for handling air-sensitive materials, hazardous powders, or sterile samples, in single and double-chamber configurations. Search by atmosphere type and chamber size, or describe the process and let ChatMRO match the enclosure.
Browse →Glove Dispensers
Wall-mount and countertop dispensers for disposable glove boxes, specified by box capacity, mounting style and material. Search by number of boxes and mounting location and let ChatMRO match a dispenser.
Browse →Glove Holder Clips
Belt-mounted clips that hold a pair of work gloves securely without pinning or holes, sized by clip mechanism and mounting style. Search by clip type, material or belt width and let ChatMRO match the right holder.
Browse →Glue Guns
Hot melt adhesive applicators that heat and dispense solid glue sticks through a nozzle, ranging from low-wattage craft tools to high-output industrial dispensing guns. Search by wattage, glue stick diameter, or dual/low-temperature operation.
Browse →Grain Moisture Testers
Handheld and benchtop meters that measure grain moisture content by capacitance or conductance to guide harvest timing and safe storage decisions, calibrated across multiple grain and seed types. Search by measurement method and grain range, or describe the crop you're testing.
Browse →Grate Magnets Housings
Enclosed housings holding a grid of high-intensity magnetic grate bars or tubes, capturing ferrous tramp metal from free-flowing dry product before it reaches downstream equipment. Search by gauss rating and housing size, or describe the product flow and contamination risk.
Browse →Grating Clips
Saddle-style and J-style clips for securing steel bar grating panels to structural supports, indexed by grating type, material and bearing bar spacing. Search by grating style and support type, or describe your grating installation and let ChatMRO match the clip.
Browse →Grease Duct and Hi Temp Access Doors
Fire-rated access doors for commercial kitchen grease exhaust ducts and other high-temperature ductwork, sized by fire rating, panel dimensions and duct construction. Search by NFPA 96 compliance, size or temperature rating and let ChatMRO match the right door.
Browse →Grease Feeders
Automatic single-point lubricators that meter grease continuously to a bearing or fitting on a set schedule, eliminating manual grease-gun rounds on hard-to-reach or continuously running equipment. Search by dispensing mechanism, reservoir size, or grease type.
Browse →Grease Fitting Kits
Assorted zerk grease fitting kits in straight, 45-degree and 90-degree configurations, covering common metric and SAE thread sizes for bearing and pivot point lubrication. Search by thread size, fitting angle and drive style, or describe the equipment you're maintaining.
Browse →Grease Fittings
Straight, 45°, 65° and 90° grease fittings (zerk fittings) sized by thread type and standard for lubricating bearings, bushings and pivot points. Search by thread size and mounting angle and let ChatMRO match the right fitting.
Browse →Grease Gun Accessories
Hydraulic couplers, extension hoses, needle nozzles and grease fittings compatible with manual, pneumatic and battery-powered grease guns, sized to standard zerk fitting and cartridge specifications. Search by fitting type, hose length or grease gun brand.
Browse →Grease Guns
Manual lever, pistol-grip and pneumatic grease guns for cartridge and bulk-fill lubrication, sized by output pressure and cartridge compatibility. Search by drive type, pressure rating or cartridge size.
Browse →Grease Pumps
Manual lever, air-operated and electric grease pumps for dispensing lubricant through a grease gun or centralized lubrication line, sized by output pressure and drum/pail compatibility. Search by drive type and container size, or describe the lubrication application and let ChatMRO match the pump.
Browse →Grid Coupling
Steel grid flexible shaft couplings transmitting torque between motor and driven equipment through a spring-steel grid element seated in curved hub grooves, rated by horsepower and bore size. Search by bore size and horsepower, or describe the connected equipment and let ChatMRO match the coupling.
Browse →Grinder Pumps
Submersible grinder pumps that macerate solids in sewage before pumping through small-diameter discharge piping, used where gravity sewer isn't available. Search by horsepower, discharge size and voltage, or describe the installation and let ChatMRO match the pump.
Browse →Grippers and Accessories
Pneumatic and electric parallel, angular and vacuum grippers for robotic end-of-arm tooling, sized by gripping force, stroke and jaw configuration. Search by actuation type and payload, or describe the part being handled and let ChatMRO match the gripper.
Browse →Grooved Pins
Grooved pins with parallel-grooved shanks that expand into the drilled hole for a self-retaining press fit, used in place of dowel pins where interference fit alone is unreliable. Search by groove type, diameter or length.
Browse →Grooving Tools
Indexable grooving and parting tools for lathe turning, in external, internal and face-grooving configurations sized to specific groove widths and depths. Search by groove width and workpiece material, or describe the turning operation.
Browse →Guard Rails
Fixed and modular guard railing systems meeting OSHA fall-protection height and load requirements, indexed by mounting style, material and post spacing. Search by application and length, or describe the platform edge and let ChatMRO match the railing.
Browse →Hacksaw and Coping Saw Blades
Bi-metal, carbon steel and tungsten carbide hacksaw blades plus coping and fret saw blades, sized by length and teeth-per-inch to match the material being cut. Search by TPI rating or material application.
Browse →Halogen Lamps and Bulbs
Halogen incandescent lamps in linear, PAR, MR and single-ended configurations for task, flood, stage and general commercial lighting. Search by base type, wattage and voltage, or describe the fixture and let ChatMRO match the bulb.
Browse →Halogen Leak Detectors
Handheld leak detectors for locating refrigerant and other halogenated gas leaks in HVAC-R systems, sized by sensor technology and detection sensitivity. Search by sensor type and refrigerant compatibility, or describe the system you're servicing.
Browse →Hammer Drill Bit Sets
SDS-plus, SDS-max and standard round-shank carbide-tipped masonry bit sets for drilling concrete, brick and block with rotary hammers and hammer drills. Search by shank type and diameter range, or describe your hammer drill and the masonry you're drilling and let ChatMRO match the set.
Browse →Hammer Drill Bits
Carbide-tipped hammer drill bits in SDS-plus, SDS-max and round shank styles, sized by diameter and flute length, for drilling concrete, brick and block with a rotary or SDS hammer drill. Search by shank type and diameter, or describe the base material and anchor size and let ChatMRO match the bit.
Browse →Hammer Drive Pin Anchors
One-piece pin anchors set by hammering a pin through a pre-installed sleeve into a pre-drilled hole in concrete or masonry, giving fast, no-power-tool anchoring for light to medium loads. Search by diameter, length and head style.
Browse →Hand Held Punches
Manual hand punches for metal sheet, leather, gasket material and paper, sized by punch mechanism, material thickness capacity and hole diameter. Search by material type, hole size or punch style and let ChatMRO match the right punch.
Browse →Hand Knobs and Wheels
Threaded hand knobs, star knobs, ball knobs and handwheels in plastic and metal construction, with through-hole, threaded stud and revolving styles for machine controls and clamping fixtures. Search by thread size, knob style or mounting type.
Browse →Hand Operated Hydraulic Pumps
Hand Operated Hydraulic Pumps, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Hand Ratchets
Ratchet wrenches and drive handles in standard drive sizes, with a range of tooth counts and handle styles for confined-space and general socket work. Search by drive size and tooth count, or describe the job and let ChatMRO match the ratchet.
Browse →Hand Reamer
Manually operated cutting tools used to enlarge a drilled hole to a precise final diameter and surface finish, available in straight and spiral flute styles with a square-drive shank for tap wrench operation. Search by diameter, flute type or taper, or describe the hole tolerance needed.
Browse →Hand Saws
Crosscut, rip, hacksaw and pruning hand saws in fixed and folding blade styles, with tooth counts from coarse rip patterns to fine finish-cut blades. Search by tooth count (TPI) and blade length, or describe the material you're cutting and let ChatMRO match the saw.
Browse →Hand Scrapers
Flat, hook and carbide-tipped hand scrapers used for machinist surface scraping, gasket removal and paint/adhesive stripping, sized by blade width and blade material. Search by application and blade type, or describe the surface being scraped and let ChatMRO match the tool.
Browse →Hand Sinks and Hand Wash Stations
Wall-mount, freestanding and portable hand wash stations in stainless steel and polymer construction, with foot-pedal, knee-operated and sensor faucet options. Search by mounting type and water supply, or describe your facility requirement and let ChatMRO match the station.
Browse →Hand Truck Accessories
Replacement wheels, load straps, stair-climbers, nose plate extensions and convertible attachments for two-wheel and convertible hand trucks. Search by attachment type and truck compatibility, or describe the load and let ChatMRO match the part.
Browse →Handheld & Canister Vacuum Cleaners
Cordless handheld vacuums and corded canister/wet-dry vacuums for shop cleanup, fine dust collection and spill response, in HEPA, standard filter and cyclonic configurations. Search by tank capacity and filtration type, or describe the debris and duty cycle.
Browse →Handheld Flashlights
LED handheld flashlights from compact EDC penlights to high-lumen tactical and explosion-proof models rated for hazardous locations. Search by lumen output, battery type or IP/ATEX rating, or describe the work environment and let ChatMRO match the right light.
Browse →Handheld Paint Sprayers
Airless, HVLP and cordless handheld paint sprayers for applying coatings, stains and finishes across furniture, walls, fences and equipment. Search by spray technology, power source and tip size, or describe the coating material and surface you're spraying.
Browse →Handle Nuts
Hand-operated fastening nuts — wing nuts, T-handles, star knobs and lever nuts — in steel, stainless and plastic construction, sized by thread size and grip style. Search by handle type and thread size, or describe the tool-free fastening application.
Browse →Handled Dusters
Extension-pole and fixed-handle dusters in microfiber, lambswool and static-cling synthetic fiber, built for reaching high shelving, ceiling fixtures and overhead ductwork in janitorial and warehouse settings. Search by reach, fiber type and handle style, or describe the surface being cleaned and let ChatMRO match the duster.
Browse →Handles and Pulls
Bar pulls, T-handles, recessed handles, and industrial equipment grips in stainless steel, aluminum, and plastic, sized by center-to-center mounting distance for cabinets, panels, and industrial enclosures. Search by material and mounting style, or describe the panel or door application and let ChatMRO match the handle.
Browse →Hang and Stack Bins
Louvered hanging bins and interlocking stacking bins for organizing small parts, fasteners and components on wall panels, shelving or the floor. Search by bin size and mounting style, or describe the storage system you're building out.
Browse →Hanging Folding Chair and Table Trucks
Wheeled storage and transport carts sized for folding chairs and tables, in hanging (vertical) and stacked configurations that reduce handling and floor space compared to loose stacking. Search by capacity and chair/table style, or describe your storage and transport needs.
Browse →Hanging Scales
Digital and mechanical hanging (crane) scales rated by maximum load capacity and display resolution, for suspended weighing of loads on hoists, cranes and forklifts. Search by capacity and connection type, or describe the load and lifting equipment and let ChatMRO match the scale.
Browse →Hard Hat Accessories
Replacement suspensions, sweatbands, winter liners and accessory mounts for full-brim and cap-style hard hats. Search by suspension type and hard hat brand compatibility, or describe the working conditions and let ChatMRO match the accessory.
Browse →Hard Hat Cooling Products
Evaporative cooling inserts, sweatbands and full liners designed to fit inside standard hard hat shells, reducing heat stress for workers in hot outdoor and industrial environments. Search by cooling method and hard hat brand/style compatibility, or describe your work conditions and let ChatMRO match the product.
Browse →Hard Hat Face Shields
Cap-mount and full-brim face shields rated to ANSI Z87.1 for impact and ASTM F2178 for arc-flash exposure, in clear polycarbonate, tinted and wire-mesh options that attach directly to a hard hat's front bracket. Search by hazard type and hard hat compatibility, or describe the job task and let ChatMRO match the shield.
Browse →Hard Hat Suspensions
Replacement ratchet, pinlock and slip-strap suspensions sized to standard full-brim and cap-style hard hat shells, restoring impact absorption and fit after wear or contamination. Search by suspension type and hat brand compatibility, or describe the hard hat you're servicing.
Browse →Hard Hats
Type I and Type II hard hats rated to ANSI/ISEA Z89.1, indexed by electrical class, shell material and suspension style. Search by hazard class and fit type, or describe the jobsite conditions and let ChatMRO match the hard hat.
Browse →Hardness Testers
Rockwell, Brinell, Vickers and portable rebound-type hardness testers used to verify material hardness against spec, from bench-mounted lab units to handheld field probes. Search by test method, hardness scale or material, or describe what you're testing.
Browse →Hardwire Surge Protection Devices
Panel-mount and hardwired surge protective devices (SPDs) that clamp transient voltage spikes at the electrical panel or point of use, sized by surge current rating and protection modes. Search by kA rating, panel type or UL classification and let ChatMRO match the right SPD.
Browse →Hasp Locks
Safety and security hasps that provide a padlockable point on doors, gates, cabinets and lockout/tagout isolation points, in hardened steel and multi-point lockout configurations. Search by hasp length and material, or describe the application and let ChatMRO match the hasp.
Browse →Hazardous Location Circuit Breakers
Hazardous Location Circuit Breakers, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Hazardous Location Conduit Fittings
Explosion-proof conduit seals, unions, drain-breathers and conduit bodies rated for Class I/II Division 1 and 2 hazardous locations, sized to standard rigid and IMC conduit trade sizes. Search by conduit size and area classification, or describe the hazardous location and let ChatMRO match the fitting.
Browse →Hazardous Location Lighting Fixtures
Explosion-proof and hazardous-location-rated LED and fluorescent lighting fixtures for Class I/II Division 1/2 environments, used where flammable gases, vapors, or combustible dust are present. Search by class/division rating, lumen output and mounting type.
Browse →Hazardous Location Motors
Explosion-proof and increased-safety AC motors rated for NEC Class I/II, Division 1/2 hazardous locations, for use in flammable gas, dust and vapor environments. Search by hazard class or horsepower and let ChatMRO match the motor.
Browse →Hazardous Waste Bags
Poly bags rated for hazardous, biohazard and chemical waste collection, labeled and colored per regulatory convention and sized by mil thickness for the waste stream's puncture and chemical resistance needs. Search by waste type and bag size, or describe the waste stream and let ChatMRO match the right bag.
Browse →Head Pressure Controls
Refrigeration controls that regulate condenser fan operation or refrigerant flow to maintain adequate head pressure during low ambient temperature operation, in pressure-switch and modulating valve designs matched to specific refrigerants. Search by pressure range and refrigerant compatibility, or describe the refrigeration system and let ChatMRO match the right control.
Browse →Headbands, Sweatbands and Cooling Headwear
Absorbent sweatbands and evaporative cooling headwear that manage sweat and reduce heat stress under hard hats and safety helmets, in terry cloth, moisture-wicking synthetic and PVA cooling fabric options. Search by cooling method and material, or describe the work environment and headgear fit.
Browse →Headlamps & Hands-Free Lights
LED headlamps and hands-free work lights rated by lumen output, beam pattern, and — for hazardous locations — intrinsic safety certification. Search by lumen output and battery type, or describe the work environment and let ChatMRO match the light.
Browse →Hearing Protection Accessories
Replacement cushions, foam pads, cords and hardware for earmuffs and earplugs used in high-noise industrial environments, sized to fit major hearing protector models. Search by component type and compatible model, or describe the hearing protector you're servicing and let ChatMRO match the part.
Browse →Heat Energy Recovery Ventilators
Heat recovery (HRV) and energy recovery (ERV) ventilators sized by CFM and core recovery efficiency, exchanging heat — and for ERV, moisture — between incoming fresh air and outgoing exhaust air. Search by CFM and recovery type, or describe the building and climate and let ChatMRO match the unit.
Browse →Heat Exchangers
Plate, shell-and-tube and air-cooled heat exchangers for HVAC, process cooling and fluid heat transfer applications, sized by required heat transfer surface area and rated fluid temperature/pressure. Search by exchanger type and application, or describe the fluids and duty and let ChatMRO match the exchanger.
Browse →Heat Gun Accessories
Nozzle attachments, scrapers and stands for industrial and consumer heat guns, sized to fit common barrel diameters and application-specific airflow shapes. Search by nozzle type and heat gun brand fit, or describe the heat-forming task.
Browse →Heat Guns
Corded and cordless hot-air heat guns for shrink-wrapping, paint removal, plastic welding and heat-shrink tubing work, from consumer-grade single-temperature units to variable-temperature industrial tools. Search by temperature range and nozzle style.
Browse →Heat Lamps
Infrared heat lamp bulbs and fixtures used for food holding, livestock brooding, and spot process heating, sized by wattage and rated for the fixture's clearance and duty environment. Search by wattage and application, or describe the heating need and let ChatMRO match the right lamp.
Browse →Heat Pump Solenoid Coils
Replacement solenoid coils for heat pump reversing valves, liquid line solenoids and expansion valve solenoids, sized by voltage, terminal style and mounting bore. Search by voltage and connector type, or describe the valve and let ChatMRO match the right coil.
Browse →Heat Resistant Gloves
Aluminized, leather and aramid-fiber gloves rated for direct contact and radiant heat exposure across welding, foundry and kitchen environments. Search by temperature rating and task, or describe the heat source and let ChatMRO match the glove.
Browse →Heat Slingers
Portable forced-air heaters (heat slingers) for shop floors, warehouses and job sites, in electric, propane and oil-fired configurations. Search by BTU output and fuel type, or describe the space being heated and let ChatMRO match the unit.
Browse →Heat Stress Monitors
WBGT (Wet Bulb Globe Temperature) heat stress monitors that measure combined heat, humidity and radiant load to assess worker heat exposure risk, sized by portability and logging capability. Search by measurement standard, display type or data logging capability.
Browse →Heating and Cooling Tools
Manifold gauge sets, refrigerant recovery machines, tube flaring and swaging tools, and combustion analyzers used to install and service HVAC/R equipment. Search by tool function and refrigerant type, or describe the service task and let ChatMRO match the tool.
Browse →Heating Cable Accessories
Splice kits, end seal kits, power connection kits and thermostats for self-regulating and constant-wattage heat trace cable systems, sized by cable type and system voltage. Search by cable brand and connection type, or describe the heat trace installation and let ChatMRO match the accessory.
Browse →Heating Cables
Self-regulating and constant-wattage electric heating cables used for pipe freeze protection, process temperature maintenance and roof/gutter de-icing, specified by watt density and control temperature rather than length alone. Search by wattage per foot, voltage or application, or describe the pipe run being traced.
Browse →Heavy Duty Slide Hammers
Heavy-duty slide hammers for pulling dents, extracting bearings, races and axles, and removing stuck studs, sized by impact weight and thread/attachment fitment. Search by weight and application, or describe the extraction job and let ChatMRO match the slide hammer.
Browse →Height Gauges
Precision metrology instruments for measuring and marking vertical dimensions off a granite or cast-iron reference surface, in digital, dial and vernier readout types, sized by measuring range and resolution. Search by range and readout, or describe the measurement task and required accuracy.
Browse →HEPA Air Filters
True HEPA filters rated to capture at least 99.97% of 0.3-micron particles, used in HVAC systems, cleanrooms, vacuum equipment and portable air purifiers. Search by MERV/HEPA rating, dimensions or frame type, or describe your equipment and let ChatMRO match the filter.
Browse →Hex & Torx Key Sets
Hex (Allen) and Torx key sets in L-key, T-handle, and folding formats, covering SAE, metric, and tamper-resistant security sizes. Search by drive style and size range, or describe the fastener you're working with and let ChatMRO match the key set.
Browse →Hex & Torx Keys
L-shaped hex (Allen) and Torx keys in standard and metric sizes, including ball-end, security tamper-resistant and folding multi-key sets. Search by drive size and key style, or describe the fastener you're driving.
Browse →Hex Head Cap Screws
Externally hex-headed fasteners with a full washer face under the head, used for structural and machine assembly where a wrench or socket drives the head. Search by thread size, grade and material, or describe the joint and load and let ChatMRO match the right screw.
Browse →Hex Head Lag Screws
Hex head lag screws with coarse threading for high-strength fastening into wood or pre-drilled substrates, sized by shank diameter and length. Search by diameter, length or material/coating.
Browse →Hex Nuts
Finished, jam and heavy hex nuts in UNC, UNF and metric threads, graded to match bolt strength (Grade 2/5/8, Class 8/10) rather than sold as a generic commodity fastener. Search by thread size and grade and let ChatMRO match a nut to your bolt.
Browse →Hex Shank Drill Bits
Drill bits with a 1/4 in. hex shank instead of a round shank, made to seat in impact driver quick-change chucks without slipping under high torque. Search by bit diameter, flute length, and coating, or describe the material you're drilling.
Browse →Hex Standoffs
Male-female and female-female hex standoffs that maintain fixed mounting spacing between PCBs, panels and enclosures while providing a hex flat for wrench tightening. Search by thread size, length and gender configuration, or describe the boards or panels being spaced.
Browse →HID Ballasts
Metal halide, high-pressure sodium (HPS) and mercury vapor ballasts that regulate current to a high-intensity discharge lamp so it strikes and runs stably. Search by wattage, lamp type and input voltage, or describe the fixture and let ChatMRO match the ballast.
Browse →HID Lamps and Bulbs
High-intensity discharge lamps — metal halide, high-pressure sodium and mercury vapor — that produce light through an electric arc in pressurized gas rather than a filament or LED chip, used where high lumen output over large areas is required. Search by lamp type, wattage and base style, or describe the fixture you're relamping and let ChatMRO match the bulb.
Browse →Hidden Shackle Padlocks
Padlocks whose shackle is recessed inside a hardened boron-alloy body, exposing minimal metal to bolt cutters or cable cutters. Search by body material, shackle clearance and cylinder type, or describe the application and let ChatMRO match the right lock.
Browse →High Force Hydraulic Electric Pumps
Electric-motor-driven hydraulic pumps for powering cylinders, torque wrenches and heavy lifting tools, in single- and two-speed configurations. Search by pressure and flow rate, or describe the tool being powered and let ChatMRO match the pump.
Browse →High Force Hydraulic Punch and Die Sets
Hydraulically driven punch and die sets that shear round, square or custom-shaped holes through steel and stainless enclosure panels in a single stroke, rated by maximum panel thickness and tonnage. Search by hole size or panel gauge, or describe the enclosure material and let ChatMRO match the set.
Browse →High Pressure Hydraulic Cylinders
Single and double acting hydraulic cylinders rated for high-pressure industrial and mobile duty. Search by bore, stroke and mount, or describe the application load.
Browse →High Speed Semiconductor Fuses
Ultra-fast-clearing fuses engineered to protect silicon power devices — SCRs, diodes, IGBTs, and rectifier bridges — from short-circuit failure faster than a standard fuse can clear. Search by I2t let-through rating, voltage class, or the semiconductor device you're protecting.
Browse →High Temperature Lead Wire
PTFE, silicone-rubber and fiberglass-braided lead wire rated from 200°C to 480°C for motor leads, heating elements and appliance internal wiring where standard PVC or thermoplastic insulation would fail. Search by insulation type, temperature rating and AWG size, or describe the application and let ChatMRO match the wire.
Browse →High Voltage Probe Meters
Non-contact and direct-contact voltage probes and meters rated for high-voltage testing, sized by voltage range and CAT safety rating. Search by voltage range and rating, or describe the equipment you're testing.
Browse →Hitch Pins
Clip, lynch, R-pin and spring-loaded detent hitch pins that secure trailer hitches, PTO shafts and pin-and-clevis connections. Search by pin diameter and locking style, or describe the connection and let ChatMRO match the pin.
Browse →Hoist Rings
Bolt-on lifting points rated by working load limit for rigging directly to machinery, castings and fabrications, in swivel (rotates and pivots under load) and fixed-point styles. Search by WLL and thread size, or describe the equipment you're rigging lift points for.
Browse →Hoist Rings and Accessories
Bolt-on swivel and fixed hoist rings rated to specific working load limits for rigging machinery, dies and fixtures, in metric and UNC thread sizes. Search by WLL and thread size, or describe the load being lifted.
Browse →Hole Cutters
Bi-metal hole saws, carbide-tipped hole cutters and stepped drill bits for cutting round holes through wood, metal and plastic in a single pass. Search by diameter and material being cut, or describe the job to find the right cutter type.
Browse →Hole Plugs
Snap-in and push-fit plugs that seal, finish or cap round holes in sheet metal, panels and tubing after a fastener, tool, or knockout is removed — in vinyl, rubber and nylon across standard fractional and metric diameters. Search by hole diameter and panel thickness, or describe the application and let ChatMRO match the right plug.
Browse →Hole Saw Kits
Hole saw kits are multi-piece sets of cup-shaped cutting saws in a range of diameters, sharing a common arbor, for cutting large-diameter round holes in wood, metal, and other materials. Search by material composition, diameter range, and arbor type, or describe what you're cutting and let ChatMRO match the right kit.
Browse →Hole Saws
Bi-metal, carbide-tipped and diamond-grit hole saws for cutting round holes through wood, metal, tile and masonry, sized by cutting diameter and matched to an arbor. Search by diameter and target material, or describe the material thickness and hole size.
Browse →Hole, Drill, Bore & Wire Gauges
Precision measuring gauges used to verify hole diameter, drill bit size and wire/sheet thickness against standard number, letter and fractional size systems. Search by gauge type, size range and standard system (ANSI, AWG, SWG).
Browse →Hollow Wall and Wallboard Anchors
Toggle bolts, molly bolts, self-drilling and strap toggle anchors for mounting into drywall, plaster and other hollow-wall substrates where no stud is available. Search by anchor type and pull-out rating, or describe the wall material and load and let ChatMRO match the anchor.
Browse →Hook & Loop Cable Ties
Reusable hook and loop cable wraps and straps for cable bundling, data center wiring and equipment cord management where cables need to be adjusted or removed repeatedly. Search by width or length and let ChatMRO match the tie.
Browse →Hook and Loop Fasteners
Sew-on, pressure-sensitive adhesive and heavy-duty industrial hook and loop tape, sold by the roll, strip or die-cut coin, for repeated-cycle fastening in manufacturing, automotive and signage. Search by width and adhesive type, or describe the load and cycle count you need.
Browse →Hook and Loop Sanding Discs
Hook and loop (Velcro-backed) sanding discs for random orbital and dual-action sanders, sized by diameter, grit and abrasive mineral. Search by grit range, hole pattern or backing material and let ChatMRO match the right disc.
Browse →Hooks and Picks
Pick and hook sets for removing O-rings, oil seals, gaskets and retaining rings, in straight, angled and hooked tip styles across various lengths. Search by tip style and application, or describe the part you need to remove.
Browse →Hookup Wire
Stranded and solid hookup wire in PVC, PTFE and silicone insulation, UL-listed to styles like UL1007, UL1015 and UL1061 for internal equipment wiring, panel builds and point-to-point connections. Search by AWG size, insulation and voltage rating, or describe the build and let ChatMRO match the wire.
Browse →Horizontal and Vertical Lifelines
Horizontal lifelines span between anchor points to let workers move laterally while tied off, while vertical lifelines run from a single overhead anchor for climbing or elevated work. Search by line material, length and rated capacity, or describe the work area and ChatMRO matches the right system.
Browse →Horizontal Handle Toggle Clamps
Horizontal-action toggle clamps that lock a workpiece down with the handle moving parallel to the mounting base, suited to low-clearance fixturing where vertical handle swing is restricted. Search by holding capacity and bar opening, or describe the fixture you're building and let ChatMRO match the right clamp.
Browse →Hose Clamp Assortments
Boxed assortments of worm gear, spring and T-bolt hose clamps spanning common diameter ranges, in stainless steel or zinc-plated steel bands. Search by clamp style, diameter range and band material, or describe the hose you're securing and let ChatMRO match the assortment.
Browse →Hose Crimpers
Manual, battery-powered and hydraulic hose crimpers sized by hose ID range and die interchange standard for fabricating hydraulic, air and fuel hose assemblies. Search by hose size and power type and let ChatMRO match the right crimper.
Browse →Hose Reel Accessories
Replacement and upgrade components for hydraulic, air, water and lubrication hose reels — swivel joints, mounting brackets, guide arms and latch mechanisms — sized to match specific reel models and hose types. Search by component type and reel brand, or describe your reel setup and let ChatMRO match the right accessory.
Browse →Hose Reel Mounting Brackets
Structural brackets that anchor hose reels to a wall, truck bed, or equipment frame, sized to the reel's weight and the mounting surface. Search by mount orientation, load rating, or reel diameter, or describe your installation.
Browse →Hose Safety Cables
Whip check safety cables that restrain a pressurized hose coupling from whipping loose if the connection fails, wrapping around the hose and coupling on each side of the joint. Search by hose diameter, cable length and attachment style, or describe the hose connection you're securing.
Browse →Hotel Door Latches
Auxiliary security latches and swing-bar guards built for hospitality-grade doors, covering surface-mount night latches, chain guards and ADA-compliant lever throw designs in commercial finishes. Search by mounting type, door thickness and finish, or describe the guest-room door and let ChatMRO match the hardware.
Browse →Hour Meters
Electromechanical and digital meters that track cumulative equipment operating time, used to trigger scheduled maintenance intervals on engines, motors and industrial equipment. Search by input type and mounting style, or describe the equipment being monitored.
Browse →HVAC Brushes
Coil cleaning brushes, condensate line brushes and flexible duct cleaning brushes for HVAC preventive maintenance and coil restoration. Search by bristle material or brush size and let ChatMRO match the tool.
Browse →HVAC Control Ball Valves
Characterized ball valves paired with electric or pneumatic actuators for modulating flow control in hydronic HVAC systems, rated by Cv and available in 2-way and 3-way configurations. Search by flow configuration or Cv, or describe your coil or zone and let ChatMRO match the valve.
Browse →HVLP Paint Sprayer Systems
High Volume Low Pressure spray systems that atomize coatings using a large volume of air at low pressure, delivering higher transfer efficiency and less overspray than conventional air spray guns. Search by turbine or compressor-fed configuration, cup capacity or fluid tip size, or describe the coating and substrate.
Browse →HVLP Spray Guns
High Volume, Low Pressure spray guns that atomize coatings with low-pressure air for fine, low-overspray finishes, specified by fluid tip size, feed type and air cap pressure rather than brand alone. Search by tip size, feed style or coating type, or describe the finish you're after.
Browse →Hydraulic Accumulators
Pressure vessels that store hydraulic energy using a compressed gas charge — bladder, piston and diaphragm types across a range of working pressures and volumes. Search by accumulator type and precharge pressure, or describe the system and let ChatMRO match it.
Browse →Hydraulic Axle Jacks
High-capacity hydraulic jacks designed to lift truck, trailer and heavy equipment axles for tire, brake and suspension service, rated well beyond typical automotive floor jack capacity. Search by lift capacity, lift height or jack style, or describe the vehicle and service task.
Browse →Hydraulic Bulk Hoses
Hydraulic Bulk Hoses, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Hydraulic Cartridge Valves
Screw-in and slip-in valves designed to insert directly into a manifold cavity, eliminating external plumbing for check, relief, flow control and directional functions in compact hydraulic circuits. Search by cavity size, function and pressure rating, or describe the manifold and flow requirement.
Browse →Hydraulic Chain Saws and Pruners
Hydraulic-powered chain saws and pruning attachments mounted to skid steers, excavators and tractor loaders for tree removal, land clearing and vegetation management. Search by hydraulic flow rate and bar length, or describe the host machine and cutting task.
Browse →Hydraulic Control Valves
Hydraulic Control Valves, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Hydraulic Crimping Tool Systems
Portable and bench-mount hydraulic crimpers for hose and fitting assembly, sized by crimp tonnage and die range. Search by hose ID range, crimp force or die interchange standard and let ChatMRO match the right unit.
Browse →Hydraulic Cylinders
Tie rod, welded-body and telescopic hydraulic cylinders that convert pressurized fluid into linear force and motion for lifting, pushing and pressing applications. Search by bore size, stroke length and mounting style, or describe your load and pressure rating and let ChatMRO match the right cylinder.
Browse →Hydraulic Filter Elements
Replacement filter elements for return, pressure, and suction line hydraulic filter housings, in cellulose, synthetic (glass fiber), and wire mesh media from 3 to 200 micron ratings. Search by micron rating and OEM cross-reference, or describe the housing and fluid application and let ChatMRO match the element.
Browse →Hydraulic Filters
Filtration elements and housings that remove contamination from hydraulic fluid at return, pressure or suction lines, sized by micron rating, flow capacity and system cleanliness target. Search by micron rating and line location, or describe the system and let ChatMRO match the right filter.
Browse →Hydraulic Flow Dividers
Gear-type proportional and spool-type priority flow divider/combiner valves that split a single hydraulic pump's output into two or more controlled, independent flows. Search by flow rate and division ratio, or describe your circuit and let ChatMRO match the divider.
Browse →Hydraulic Gear Pumps
Fixed-displacement hydraulic pumps that move fluid through meshing gear teeth, sized by displacement per revolution and rated maximum pressure, used where a simple, economical fixed-flow pump suits the circuit. Search by displacement and pressure rating, or describe the flow and pressure requirement and let ChatMRO match the pump.
Browse →Hydraulic High Pressure Filters
In-line hydraulic filters rated for high-pressure circuit locations, protecting sensitive downstream components like servo valves and proportional valves from contamination. Search by pressure rating and micron rating, or describe your hydraulic system and let ChatMRO match the filter.
Browse →Hydraulic High Pressure Hose Assemblies
Crimped hydraulic hose assemblies from single-wire to four-spiral construction, built to SAE 100R specifications with matched end fittings. Search by hose ID, working pressure and fitting configuration, or describe the circuit you're building.
Browse →Hydraulic Hose Adapters and Plugs
Thread-conversion adapters and blanking plugs for hydraulic hose and tube assemblies, converting between NPT, BSPP, JIC, ORFS, and metric thread standards or sealing a line end. Search by thread standard, size and pressure rating, or describe the two connections being joined.
Browse →Hydraulic Hose Fittings
Crimp-style, field-attachable and adapter fittings that terminate hydraulic hose to a system's port or component connection, sized by hose ID, thread standard and pressure rating. Search by hose size and thread type, or describe the connection you need and let ChatMRO match the right fitting.
Browse →Hydraulic Hose Sleeves
Abrasion-resistant, fire-resistant and spring guard sleeves sized to hydraulic hose OD, protecting hose assemblies from wear, heat and kinking in mobile equipment and industrial routing. Search by protection type and hose diameter, or describe the routing hazard and let ChatMRO match the sleeve.
Browse →Hydraulic Impact Wrenches
Hydraulically powered torque wrenches for high-torque bolting on flanges, structural connections and heavy equipment, driven by a separate hydraulic pump. Search by torque range and drive size, or describe the bolting application and let ChatMRO match the tool.
Browse →Hydraulic Industrial Cylinder Mounts
NFPA and ISO-standard cylinder mounting hardware — clevis brackets, trunnion pins, flange plates and foot mounts — sized to bore diameter for tie-rod and welded hydraulic cylinders. Search by mount type and bore size, or describe the cylinder and load application.
Browse →Hydraulic Manifold Valves
Cartridge-style and sandwich-plate manifold valves for integrating flow, pressure and directional control functions into a compact hydraulic manifold block. Search by cavity size and valve function, or describe the circuit and let ChatMRO match the valve.
Browse →Hydraulic Pipe Benders
Hydraulic pipe and tube benders that form precise bends in steel, stainless and rigid conduit using die-set hydraulic force, in manual hand-pump and powered configurations. Search by pipe capacity and drive type, or describe the pipe schedule and bend angle you need.
Browse →Hydraulic Pipe Cutters
Battery-powered, hand-pump and pedal-operated hydraulic cutters for steel, copper and plastic pipe up to several inches in diameter, used where a mechanical or ratchet cutter can't generate enough force. Search by pipe diameter and material, or describe the cutting job.
Browse →Hydraulic Piston Pumps
Axial and bent-axis piston pumps for high-pressure hydraulic circuits. Search by displacement and pressure, or describe the duty cycle and mobile or industrial use.
Browse →Hydraulic Presses
H-frame, C-frame and shop hydraulic presses that generate high compressive force for pressing, forming, straightening and assembly work, sized by tonnage and stroke length. Search by tonnage and frame style, or describe the job and let ChatMRO match the right press.
Browse →Hydraulic PTO Pumps
Gear-type hydraulic pumps designed to mount directly to a truck transmission or tractor PTO output, converting mechanical rotation from the power-take-off into hydraulic flow for dump beds, cranes and auxiliary hydraulic circuits. Search by displacement, mounting flange and shaft configuration, or describe the PTO and application and let ChatMRO match the pump.
Browse →Hydraulic Pump and Motor Mount Adapters
SAE flange and bell-housing mounting adapters that couple hydraulic pumps and motors to engines, gearboxes and drive shafts, specified by SAE mounting flange size and shaft coupling configuration. Search by SAE size or describe the drive configuration and let ChatMRO match the adapter.
Browse →Hydraulic Quick Couplers
Hydraulic quick couplers in ISO 7241 Series A/B, flat-face and skid-steer profiles, sized by nominal size, port thread and rated flow/pressure, for fast tool and attachment changeover. Search by profile standard and port size, or describe the equipment you're connecting.
Browse →Hydraulic Reservoir Tanks
Fluid storage tanks that hold, cool and condition hydraulic oil for a power unit, sized by usable capacity and fitted with baffles, filler-breathers and return-line diffusers. Search by capacity, mounting style and material.
Browse →Hydraulic Tool Flow Control Valves
Adjustable and fixed flow control valves regulating hydraulic fluid flow to hand-held and stationary hydraulic tools, in needle, priority and pressure-compensated designs. Search by flow rate and port size, or describe the tool circuit you're regulating.
Browse →Hydraulic Torque Wrenches
Square-drive and low-profile cassette-style hydraulic torque wrenches for high-torque bolting on flanges, pumps and turbines. Search by torque range and drive type, or describe the bolt size and access clearance and let ChatMRO match the tool.
Browse →Hydraulic Two Stage Gear Pumps
Dual-section gear pumps combining a high-volume, low-pressure section with a low-volume, high-pressure section on a common shaft, used where a cylinder needs to extend quickly at low pressure then switch automatically to high force at reduced flow. Search by displacement and pressure rating, or describe the cylinder cycle you're powering.
Browse →Hydraulic Valve Manifolds
Machined manifold blocks and sub-plates that stack multiple directional, relief and flow-control valves onto one manifold, cutting hose runs and leak points versus discrete plumbed valves. Search by cavity pattern, port count and pressure rating.
Browse →Hydraulic Valves
Directional control, pressure relief/reducing, and flow control hydraulic valves in cartridge, sub-plate and manifold-mount configurations, rated to system pressures up to 5,000+ PSI. Search by valve function and port size, or describe the circuit and let ChatMRO match the valve.
Browse →Hydraulic Vane Pumps
Fixed and variable displacement vane pumps for industrial hydraulic power units. Search by displacement and pressure rating, or describe the circuit and duty cycle.
Browse →Hydraulic Vibrators
Hydraulically driven rotary vibrators that mount to hoppers, chutes and compaction equipment to promote bulk material flow, sized by centrifugal force output and required hydraulic flow rate. Search by application and force rating, or describe your material flow problem and let ChatMRO match a vibrator.
Browse →Hydraulic Water Pumps
Hydraulic Water Pumps, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Hydraulic Winches
Hydraulically driven planetary and worm gear winches for continuous-duty pulling, recovery and load positioning, sized by line pull capacity and hydraulic flow requirement. Search by pulling capacity and mounting style, or describe the vehicle or equipment and let ChatMRO match the winch.
Browse →Hydronic Manometers
Differential pressure manometers for balancing and diagnosing hydronic heating and chilled water systems, in digital and analog readout styles. Search by pressure range and connection type, or describe the system you're balancing and let ChatMRO match the manometer.
Browse →Hydrostatic Test Pumps
Manual and motorized pumps used to pressurize piping, vessels and fittings with water to verify leak tightness and pressure rating before a system is put into service, sized by maximum test pressure and reservoir capacity. Search by pressure rating and drive type, or describe the pipe size and test standard and let ChatMRO match the pump.
Browse →I Beam and Column Protectors
Foam, high-density polyethylene, and steel impact guards that wrap around structural I-beams and columns to absorb forklift and equipment impact and improve visibility, sized to fit standard beam flange widths and column diameters. Search by material and impact rating, or describe the beam/column dimensions and traffic exposure and let ChatMRO match the protector.
Browse →IBC and Tank Spill Containment
Secondary containment pallets, berms and dike systems sized to hold the full contents of an IBC tote or bulk storage tank in the event of a leak or rupture, meeting EPA SPCC containment volume requirements. Search by containment capacity and tank configuration, or describe the vessel you need to contain.
Browse →IC Insertion and Extraction Tools
Hand tools designed to insert and remove integrated circuits from sockets or PCBs without bending pins or applying uneven force, sized to DIP, PLCC, and SOIC package families. Search by package type and pin count, or describe the chip package being handled and let ChatMRO match the tool.
Browse →Ice Dispensers
Countertop, floor-mount and ice-and-water combination dispensers sized by daily ice storage capacity, dispensing cubed, nugget or flaked ice for foodservice, hospitality and healthcare use. Search by capacity and ice type, or describe the venue and volume and let ChatMRO match the dispenser.
Browse →Ice Machine Pumps
Water circulation and condensate drain pumps for commercial ice machines, sized to the machine's water flow and lift requirements. Search by pump type and voltage, or give ChatMRO your ice machine make and model to find a matching replacement.
Browse →Ice Makers
Commercial ice machines producing cube, flake, nugget or gourmet ice, rated by daily production capacity and condenser type. Search by ice type or capacity, or describe your application and let ChatMRO match the right machine.
Browse →ID Card Printer Accessories
Ribbons, cleaning kits, blank cards and lamination supplies for ID card and badge printers, matched to specific printer models and card materials. Search by consumable type and printer brand/model, or describe your badging program.
Browse →ID Card Printers
Direct-to-card and retransfer printers for producing employee badges, access cards and membership IDs, sized by print technology, sides printed and encoding capability. Search by print method, card capacity or encoding type and let ChatMRO match the right printer.
Browse →Idler Sprockets
Non-driven sprockets used to guide, tension or change the wrap direction of roller chain in a drive system, sized to standard chain pitch and tooth count. Search by chain size (ANSI), tooth count and bore/mounting style.
Browse →IEC Magnetic Contactors
Electromagnetically operated switching contactors built to IEC 60947-4-1 standards, used to switch motor and power loads on and off under electronic or manual control. Search by AC rating, coil voltage or pole configuration, or describe your motor load and let ChatMRO match the contactor.
Browse →IEC Miniature Circuit Breakers
DIN-rail-mounted miniature circuit breakers built to IEC 60898/60947 for overcurrent protection in panels destined for markets outside North America. Search by trip curve, current rating and pole count, or describe your panel and circuit load and let ChatMRO match the right breaker.
Browse →IEC Supplementary Protectors
Miniature circuit breakers rated as supplementary protectors under IEC 60934, for equipment-level overcurrent protection inside panels and OEM machinery. Search by amperage and trip curve, or describe the load and let ChatMRO match the protector.
Browse →Immersion Heaters
Screw-plug, flanged and over-the-side immersion heaters for direct electric heating of tanks, vessels and process fluids, sized by wattage and sheath material. Search by fluid type and tank volume, or describe the heating application and let ChatMRO match the right heater.
Browse →Impact Socket Sets
Impact-rated 6-point socket sets built to withstand the shock loading of pneumatic and cordless impact wrenches, in SAE and metric sizes across 1/4 to 1 inch drive. Search by drive size and range, or describe the fastener sizes you're working with.
Browse →Impact Sockets
Impact-rated sockets built with thicker walls and impact-grade alloy steel to withstand the shock loading of pneumatic and electric impact wrenches, specified by drive size, point count and length rather than fractional/metric size alone. Search by drive size, socket depth or fastener type, or describe the tool being used.
Browse →Impact Wrench Accessories
Impact-rated sockets, extensions, adapters and anvils built to withstand the shock loads of pneumatic and cordless impact wrenches, sized by drive size and socket type. Search by drive size, socket depth or application and let ChatMRO match the right accessory.
Browse →Impeller Pumps
Flexible and rigid impeller pumps for self-priming fluid transfer, in belt-driven, direct-drive and PTO-mounted configurations. Search by flow rate and impeller material, or describe the fluid being pumped and let ChatMRO match the pump.
Browse →Incandescent Lamps and Bulbs
Standard and specialty incandescent bulbs in A-shape, reflector, appliance and industrial sizes, sized by base type, wattage and voltage. Search by base type and application, or describe the fixture you're replacing bulbs in.
Browse →Indicating Transmitters
Pressure, temperature, level and flow transmitters with an integral local digital display for on-site process reading alongside the transmitted signal. Search by measured variable and output type, or describe the process and let ChatMRO match the transmitter.
Browse →Indicator Holders, Bases and Stands
Indicator holders, bases and stands position dial and test indicators for repeatable inspection setups, from magnetic swivel bases to fine-adjustment column stands. Search by base type, arm reach and indicator stem diameter, or describe the inspection task and ChatMRO matches the right fixture.
Browse →Indoor Air Quality Sampling Pump Accessories
Calibrators, filter cassette holders, tubing and battery packs used with personal and area air sampling pumps for indoor air quality monitoring. Search by flow rate range and media type, or describe your sampling protocol and let ChatMRO match the accessory.
Browse →Indoor Trash Cans
Indoor trash cans for offices, break rooms and production floors range from open-top wire baskets to step-on lidded receptacles rated for higher-traffic facility use. Search by capacity, material and lid mechanism, or describe the space and ChatMRO matches the right can.
Browse →Industrial and Commercial Dehumidifiers
Refrigerant and desiccant dehumidifiers sized for warehouses, water damage restoration, and process spaces requiring controlled humidity below what standard HVAC can maintain. Search by pints-per-day capacity and technology, or describe the space and let ChatMRO match the unit.
Browse →Industrial and Fire Hose Nozzles
Adjustable pattern, fog and straight-stream fire hose nozzles and industrial washdown nozzles, sized to NH/NPSH thread standards and rated GPM flow, for fire suppression and industrial spray applications. Search by flow rate, thread type or pattern control.
Browse →Industrial Diaphragm Pumps
Air-operated double diaphragm (AODD) pumps for transferring corrosive, abrasive and viscous industrial fluids without electrical power at the pump, sized by flow rate and inlet/outlet port size. Search by diaphragm material and flow rate, or describe the fluid being pumped and let ChatMRO match the pump.
Browse →Industrial Glass Thermometers
Liquid-in-glass process thermometers for tank, pipe and vessel temperature monitoring, specified by temperature range, fill fluid and stem/immersion length. Search by range and mounting style and let ChatMRO match the thermometer and thermowell.
Browse →Industrial Markers
Paint markers, metal markers, welding markers and temperature-resistant markers formulated to write on oily, rough, hot or curved industrial surfaces where a standard marker fails. Search by ink type, tip size and surface compatibility, or describe the marking task you need.
Browse →Infrared Heater Elements
Quartz, ceramic and metal sheath infrared heating elements for process and comfort heating, sized by wavelength, wattage and element length. Search by element type, voltage or wavelength band and let ChatMRO match the right element.
Browse →Infrared Thermometer and Imager Accessories
Calibration accessories, protective cases, lenses and mounting hardware for handheld infrared thermometers and thermal imaging cameras. Search by accessory type and device compatibility, or describe the imager model and let ChatMRO match the right accessory.
Browse →Infrared Thermometers
Handheld non-contact infrared thermometers used to measure surface temperature without touching the target, specified by temperature range, distance-to-spot ratio and emissivity adjustment rather than form factor alone. Search by temperature range, D:S ratio or application, or describe the surface being measured.
Browse →Inline Duct Fans
Centrifugal and mixed-flow inline duct fans mounted directly in round or rectangular ductwork for ventilation, exhaust and make-up air applications. Search by CFM rating, duct diameter and static pressure capability.
Browse →Inline Filters
In-line filters installed directly into a pipe, hose or tube run to strip particulate, moisture or contaminants from air, fuel, water or hydraulic fluid without a separate housing. Search by port size, micron rating and body material, or describe the line you're filtering.
Browse →Inline Strainers
Y-strainers, basket strainers and duplex strainers that protect pumps, valves and instruments from pipeline debris, sized by pipe connection, mesh rating and pressure class. Search by pipe size and application media.
Browse →Insect and Animal Traps
Snap traps, glue boards, live-catch cages and pheromone-lure insect traps for rodent, insect and small-wildlife pest control in facilities and warehouses. Search by pest type and trap style, or describe the pest issue and let ChatMRO match the trap.
Browse →Inside Micrometers
Caliper-jaw and tubular (rod-extension) inside micrometers for measuring bore, bushing and internal diameters, in mechanical and digital readout with ranges from small-hole to large-bore extension sets. Search by range, resolution or measuring style.
Browse →Inspection Mirrors
Telescoping and fixed-handle inspection mirrors for viewing hard-to-reach areas in automotive, mechanical and security inspection work, specified by mirror head diameter, shape and telescoping reach. Search by reach distance and mirror shape and let ChatMRO match the tool.
Browse →Instant Reverse Motors
AC gear motors and brake motors engineered for rapid, repeated direction reversal without a coast-down delay, for indexing, positioning and cyclic-motion equipment. Search by horsepower and voltage, or describe the reversal cycle and duty requirement and let ChatMRO match the motor.
Browse →Instrument Combination Kit
Pre-assembled kits bundling multiple related measurement instruments and accessories into a single organized case, sized around a specific trade or testing discipline. Search by the measurement functions included, or describe the trade and test parameters needed.
Browse →Insulated Hand Ratchets
Ratcheting hand tools with double-layer insulation rated to 1000V AC for live or near-live electrical work, built to IEC 60900 and tested individually per unit, not just by design type. Search by drive size and voltage class, or describe the panel voltage you're working near.
Browse →Insulated Tool Sets
Hand tool sets with dielectric insulation rated to 1000V AC per IEC 60900/ASTM F1505, for work on or near energized electrical equipment, sold as individual tools or complete kits. Search by voltage rating and tool count, or describe the electrical work and let ChatMRO match the set.
Browse →Insulation Boards
Rigid polyisocyanurate, extruded polystyrene, expanded polystyrene, and mineral wool board insulation for roofs, walls, foundations and mechanical systems. Search by material, thickness and R-value, or describe the application you're insulating.
Browse →Insulation Breakdown Testers
Insulation breakdown testers (hipot/dielectric withstand testers) apply high voltage to verify insulation integrity, specified by maximum test voltage, leakage current sensitivity and AC/DC test capability for electrical safety compliance testing.
Browse →Insulator Washers
Non-conductive washers that electrically or thermally isolate a fastener from the surrounding assembly, sized by bore diameter and material dielectric strength. Search by material, bore size or application (electrical/thermal).
Browse →Intake Filters and Silencers
Intake air filters and silencers for reciprocating and rotary air compressors, generators and industrial engines. Search by flow rate (CFM) and connection size, or describe the equipment and let ChatMRO match the component.
Browse →Intake Louvers
Fixed and adjustable-blade intake louvers in extruded aluminum, sized by free area and wall opening, for HVAC makeup air, equipment cooling and building ventilation intakes. Search by blade type and free area, or describe the wall opening and let ChatMRO match the louver.
Browse →Interchangeable Head Torque Wrenches
Modular torque wrenches accepting interchangeable ratcheting, open-end, and crowfoot heads across a shared handle, sized by torque range and drive. Search by torque range and head type, or describe the fastener and access constraint you're working with.
Browse →Interchangeable Torque Wrench Heads
Interchangeable heads that attach to a click or dial torque wrench body, letting one calibrated wrench serve open-end, box-end, ratcheting, and crowfoot applications by swapping the head instead of the whole tool. Search by connection type and drive size, or describe the wrench body you're fitting.
Browse →International Voltage Converters
Step-up and step-down voltage converters and transformers for operating equipment across 100-240V regional power standards. Search by wattage rating and voltage conversion direction, or describe the equipment and destination country.
Browse →Invertible Fork Manual Material Lifts
Hand-crank and hydraulic manual material lifts fitted with forks that invert or reverse orientation, letting one unit both lift a load onto a surface and lower a load down from it. Search by capacity and maximum lift height, or describe the load and lift range you need and let ChatMRO match the unit.
Browse →Irradiance Meters
Instruments that measure radiant power per unit area from sunlight, UV sources or artificial lighting, using photodiode or thermopile sensors calibrated in watts per square meter. Search by spectral range and sensor type, or describe the measurement application.
Browse →Irrigation and Sprinkler Timers
Irrigation controllers and sprinkler timers that automate zone valve scheduling for landscape and agricultural watering, sized by number of zones and power source. Search by zone count and control type, or describe your irrigation system and let ChatMRO match the timer.
Browse →Isolation Transformers
Single- and three-phase isolation transformers that electrically decouple a load from its power source for safety, noise filtering, and voltage transformation. Search by kVA rating, primary/secondary voltage and phase, or describe the load and let ChatMRO match a unit.
Browse →Jack Screws
Threaded mechanical screws used to lift, level or clamp loads by converting rotary input into linear force, ranging from small connector jack screws to heavy machinery leveling and lifting screws. Search by load capacity and thread size, or describe the lifting or leveling application and let ChatMRO match the screw.
Browse →Janitor Housekeeping Carts
Rolling janitor carts and housekeeping carts for commercial cleaning, linen service and hospitality room turnover, sized by bag capacity and shelf configuration. Search by capacity and application, or describe your cleaning program and let ChatMRO match the cart.
Browse →Jaw Coupling Hubs
Aluminum, steel and sintered iron hubs for flexible jaw-type couplings, sized to standard L-series and metric bore ranges, paired with an elastomeric spider to connect two shaft ends. Search by hub series and bore size, or describe the shaft-to-shaft connection and let ChatMRO match the right hub.
Browse →Jaw Coupling Spiders
Elastomeric spider inserts for L-jaw and curved-jaw flexible couplings, in Buna-N, urethane, Hytrel and Neoprene compounds across a range of durometer hardness. Search by coupling size and durometer, or describe the drive application and let ChatMRO match the spider.
Browse →Jet Pump Systems
Shallow-well and deep-well jet pump systems that use a venturi ejector to lift water from wells where suction lift alone is insufficient, sized to well depth and household or irrigation demand. Search by well depth and flow rate, or describe your well setup and let ChatMRO match the pump.
Browse →Jig Saws
Corded and cordless jigsaws for curved, plunge and straight cuts in wood, metal and plastic, with variable orbital action and tool-free blade change systems. Search by power source and stroke length, or describe the material and cut you need and let ChatMRO match the saw.
Browse →Jobber Drill Bit Sets
Jobber length twist drill bit sets in high-speed steel, cobalt and carbide-tipped construction, in fractional, number, letter and metric size ranges. Search by material and size range, or describe the drilling application and let ChatMRO match the set.
Browse →Jobber Length Drill Bits
Standard jobber length twist drill bits in HSS, cobalt and coated finishes. Search by diameter and shank, or describe the material you are drilling.
Browse →Jumper Cables
Heavy-duty booster cables in copper or copper-clad aluminum, sized by gauge and length for jump-starting automotive, fleet and industrial equipment batteries. Search by wire gauge and vehicle class, or describe the starting application and let ChatMRO match the cable set.
Browse →Key Stock Assortments
Assorted square and rectangular key stock kits in low-carbon and alloy steel, covering common inch and metric sizes for shaft-to-hub keyway connections in power transmission repair. Search by key type and size range, or describe the shaft diameter you're keying and let ChatMRO match the assortment.
Browse →Kitchen and Wet Area Mats
Anti-fatigue and slip-resistant floor mats designed for standing work near water, grease and food spills, with drainage holes, beveled edges and grease-resistant materials for commercial kitchen and wet-process floors. Search by drainage design and material, or describe the wet area you're matting.
Browse →Kitchenware Tumblers, Bowls and Shakers
NSF-listed stainless steel and polycarbonate tumblers, mixing bowls and cocktail/spice shakers built for commercial kitchen and bar volume, not retail drinkware. Search by material, capacity and application, or describe the kitchen task and let ChatMRO match the item.
Browse →Knit Gloves
Seamless knit work gloves in cotton/polyester, nylon and cut-resistant fiber blends, with nitrile, polyurethane or latex palm coatings. Search by gauge and cut level, or describe the handling task and let ChatMRO match the glove.
Browse →Label Maker Cable and Wire Markers
Self-laminating, heat-shrink and pre-printed wire and cable identification labels for electrical, network and industrial wiring, matched to specific label printer models. Search by label style and wire gauge, or describe your labeling application.
Browse →Laboratory Faucets
Chemical-resistant faucets built for lab bench and fume hood sinks, in deck-mount, wall-mount and gooseneck configurations with serrated hose-end outlets for direct tubing connection. Search by mount style and valve type, or describe the lab bench setup you're plumbing.
Browse →Laboratory Tongs and Forceps
Crucible tongs, beaker tongs and precision forceps in stainless steel and other lab-grade materials, for handling hot glassware, crucibles and small specimens. Search by tip style and application, or describe the lab task and let ChatMRO match the tool.
Browse →Lamp Changers
Extension poles fitted with a lamp-gripping head used to install and remove bulbs in high-bay fixtures, street lights and pole-mounted lighting without a ladder or lift. Search by pole length, head type and lamp compatibility, or describe the fixture height and lamp type and let ChatMRO match the right changer.
Browse →Landscape and Bow Rakes
Bow rakes, level (landscape) rakes and thatching rakes for grading soil, spreading mulch and clearing debris, with rigid steel or forged heads on wood, fiberglass or steel handles. Search by tine count and head width, or describe the grading task and let ChatMRO match the rake.
Browse →Laser Level Accessories
Tripods, elevation rods, rotary laser detectors and target plates that extend a laser level's usable range and accuracy for grading, leveling and layout work. Search by accessory type and compatibility, or describe the laser level being used and let ChatMRO match the accessory.
Browse →Leather Palm Gloves
Cowhide, split leather and pigskin palm work gloves with cotton or knit backs, in gauntlet, safety and knit-wrist cuff styles. Search by leather grade and cuff type, or describe the handling task and let ChatMRO match the glove.
Browse →LED Channel Strip Fixtures
Extruded aluminum channels that house and protect flexible LED strip lighting, providing heat sinking, mechanical protection and a diffused or clear lens for architectural and task lighting installs. Search by channel profile, mounting style and lens type, or describe the install location and let ChatMRO match the right channel.
Browse →LED Display Cove Lighting
Linear LED cove fixtures and tape light systems for architectural cove lighting, display cases and accent lighting. Search by fixture length and color output, or describe the application and let ChatMRO match the fixture.
Browse →LED Light Panels
Edge-lit and backlit LED flat panels for drop-ceiling troffer replacement and general area lighting, sized by dimension, lumen output and color temperature. Search by panel size and CCT, or describe the space and let ChatMRO match the right panel.
Browse →LED Low Bay Fixtures
LED low bay fixtures for industrial and commercial spaces with ceiling heights typically under 20 feet, sized by lumen output, beam angle and mounting type. Search by wattage, mounting height or lumen package and let ChatMRO match the right fixture.
Browse →LED Undercabinet Lighting
Hardwired and plug-in LED undercabinet light bars and strips for kitchen countertop, workbench and retail display task lighting. Search by color temperature or length and let ChatMRO match the fixture.
Browse →Left Hand Insert
Left-hand indexable carbide inserts for turning, grooving and threading tool holders configured for reverse spindle rotation or back-facing operations. Search by insert shape code, carbide grade and application, or describe the machining operation and let ChatMRO match the right insert.
Browse →Lens Cleaning Stations
Wall-mount and portable lens cleaning stations combining an antifog cleaning solution reservoir with a tissue dispenser, for safety eyewear, optics and instrument lens maintenance at production and lab workstations. Search by mounting type and solution capacity, or describe your workstation layout and let ChatMRO match the station.
Browse →Leveling Mounts
Threaded leveling mounts and machine feet that support and level heavy equipment while damping vibration, sized by load capacity, thread size and base diameter. Search by equipment weight and floor type, or describe your machine base and let ChatMRO match a mount.
Browse →Leveling Rods and Tripods
Telescoping and fixed leveling rods, and wood or aluminum tripods, for optical levels, transits, total stations and GPS survey equipment. Search by rod length and graduation type, or describe the survey instrument and let ChatMRO match the accessory.
Browse →Lifeline Accessories
Hardware components for horizontal and vertical lifeline fall protection systems, including anchors, rope grabs, tensioners and energy absorbers. Search by hardware type and lifeline system compatibility, or describe the fall protection application and let ChatMRO match the right accessory.
Browse →Light Curtains
Optoelectronic safety light curtains for machine guarding, in finger, hand and body detection resolutions with Type 2 and Type 4 safety ratings. Search by protection height and resolution, or describe the guarded machine and let ChatMRO match the curtain.
Browse →Lighting Control System Accessories
Occupancy and vacancy sensors, dimming modules, photocells and relay panel accessories that extend a building's lighting control system beyond basic switching. Search by control type, communication protocol and mounting style, or describe the space you're controlling.
Browse →Lightning Detectors
Portable and fixed-mount lightning detectors that sense electromagnetic and optical signatures of approaching strikes, sized by detection range and alert output. Search by range and deployment type, or describe the outdoor operation being protected and let ChatMRO match the detector.
Browse →Limit Switch Accessories
Replacement levers, roller arms, plungers and mounting brackets for industrial limit switches used in position sensing and machine safety interlocks, sized by switch series and actuator style. Search by switch brand and actuator type, or describe your application and let ChatMRO match a part.
Browse →Limit Switch Body and Contacts
Replacement limit switch bodies, contact blocks and actuator heads for industrial machine safety and position-sensing circuits, in NO/NC contact configurations across standard NEMA and IEC housing sizes. Search by contact configuration and voltage rating, or describe the switch you're replacing and let ChatMRO match the part.
Browse →Limit Switch Heads
Replaceable actuator heads for industrial limit switches — roller lever, plunger, rotary and wobble stick styles — sized to match a specific switch body's mounting pattern. Search by actuator type and switch series, or describe the mechanical motion being sensed and let ChatMRO match the head.
Browse →Linear Fluorescent Lamps
T5, T8 and T12 linear fluorescent replacement tubes for existing fixtures, in standard and high-output configurations. Search by tube diameter, length and color temperature, or describe the fixture and let ChatMRO match the lamp.
Browse →Linear Guide Carriages and Slides
Ball-type and roller-type linear guide carriages and matching rails for precision linear motion. Search by rail size and load rating, or describe the axis.
Browse →Linear Guide Rail Carriage Assemblies
Precision linear guide rails and matched carriage blocks for CNC, automation and motion control axes. Search by rail width, carriage configuration and preload class, or describe the axis and load and let ChatMRO match the assembly.
Browse →Linoleum and Vinyl Flooring Tools
Specialized cutting, seaming and roller tools for installing sheet vinyl and linoleum flooring, from hook-blade knives to heat welders for seam finishing. Search by installation step, or describe the flooring job and let ChatMRO match a tool.
Browse →Liquid Level Switch Accessories
Mounting hardware, extension cables and replacement floats for liquid level switches used in tank, sump and reservoir level control. Search by accessory type and switch compatibility, or describe the tank setup and let ChatMRO match the right accessory.
Browse →Liquid Tight Conduit
Flexible metallic and nonmetallic liquid tight conduit, jacketed to seal out oil, water and washdown spray while routing wiring to motors, machinery and outdoor equipment. Search by material, trade size and jacket type, or describe the installation environment.
Browse →Liquid Tight Conduit Fittings
Straight, 90-degree and 45-degree liquid tight connectors for flexible metallic and non-metallic conduit in wet or washdown electrical installations. Search by conduit trade size and connector angle, or describe the installation and let ChatMRO match the fitting.
Browse →Load Binders
Ratchet and lever-style chain binders for tensioning and securing chain around cargo loads, rated by chain size and working load limit per DOT/FMCSA cargo securement rules. Search by chain size and binder type, or describe the load and let ChatMRO match the binder.
Browse →Lockset Latches
Replacement latch bolt assemblies and strike plates for interior and exterior door locksets, available in standard backset sizes with latch, deadlatch and mortise configurations. Search by backset and bolt type, or describe the door and lockset you're servicing.
Browse →Loose Absorbents
Granular loose absorbent material spread over a spill to soak up oil, chemicals or general liquid before sweep-up, available in clay, cellulose and synthetic polymer formulations with differing absorption capacities per material type. Search by absorbent type and spill category, or describe the liquid and let ChatMRO match the absorbent.
Browse →Low Bay Fluorescent Fixtures
Fluorescent light fixtures designed for ceiling heights under roughly 20 feet, in T5, T8 and T12 lamp configurations with pendant, surface and chain-hung mounting options. Search by lamp type and mounting style, or describe the ceiling height and space you're lighting.
Browse →Low Voltage Thermostats
24V AC thermostats that switch heating and cooling equipment through low-voltage control circuits rather than line voltage, available in programmable, non-programmable and smart/connected configurations matched to a system's heat/cool staging. Search by staging and programmability, or describe the HVAC system and let ChatMRO match the thermostat.
Browse →Lubrication Container Accessories
Accessories for handling, dispensing and transferring grease and oil from drums, pails and cans — pumps, spouts, funnels and follower plates. Search by container size, lubricant viscosity and accessory type, or describe the lubrication task and let ChatMRO match the part.
Browse →Lug Nut Wrenches
Cross-style, telescoping and torque-limiting lug wrenches for automotive and heavy-duty wheel service, sized to common OEM lug nut and spline drive patterns. Search by socket size and vehicle class, or describe the wheel you're servicing.
Browse →Lumber Crayons
Wax-based marking crayons for grading, sorting and layout marking on rough lumber, concrete and steel, sized by color and wax hardness. Search by color, size or holder compatibility and let ChatMRO match the right crayon.
Browse →Machine Deburring Tools
Rotary carbide burrs, countersink deburring tools and CNC-compatible deburring cutters for removing machining burrs and sharp edges from drilled, milled and turned parts. Search by shank size and edge geometry, or describe the material and let ChatMRO match the right tool.
Browse →Machinery Movers
Machine skates, rigging rollers and toe jacks used to lift and relocate heavy machinery short distances across a shop floor, rated by load capacity per unit and set. Search by equipment weight and floor surface, or describe your machine move and let ChatMRO match a mover.
Browse →Magnetic Drill Presses
Portable magnetic-base drill presses that clamp directly to steel structures for on-site hole drilling and annular cutting, sized by magnetic holding force and spindle travel. Search by capacity and application, or describe the steel section and hole size and let ChatMRO match the machine.
Browse →Magnetic Locators
Passive magnetic locators for finding buried rebar, survey stakes, well casings and other ferrous objects without power or ground contact. Search by detection depth and application, or describe the jobsite condition and let ChatMRO match the locator.
Browse →Magnetic Starters With Electronic Overload
Combination magnetic starters pairing an AC contactor with a solid-state electronic overload relay for precise, adjustable motor overload protection. Search by contactor NEMA/IEC size, overload trip range and enclosure type, or describe the motor and application and let ChatMRO match the right starter.
Browse →Magnetically Actuated Safety Interlock Switches
Non-contact magnetic safety interlock switches for guard door monitoring, in standard and coded (high-integrity) versions rated to safety category 4 / PLe. Search by coding level and output type, or describe the guarded machine and let ChatMRO match the switch.
Browse →Mailbox Posts
Freestanding posts used to mount residential and commercial mailboxes at USPS-compliant curb height, available in steel, aluminum and post-and-arm configurations for single or multi-mailbox installations. Search by material and mounting type, or describe the installation and let ChatMRO match the post.
Browse →Manhole Shelters and Umbrellas
Portable frame-and-cover shelters and single-post umbrellas that protect crews and equipment working at an open manhole or utility vault from weather and provide a visible work-zone marker. Search by shelter size, frame material and weather rating, or describe the confined space entry you're protecting.
Browse →Manifold Gauge Set Accessories
Charging hoses, quick-connect couplers, adapters and replacement gauges for HVAC/R manifold gauge sets, sized by refrigerant type and connection thread. Search by refrigerant and fitting size, or describe the service task and let ChatMRO match the accessory.
Browse →Manifold Gauge Sets
Manifold Gauge Sets, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Manual Flush Valves
Manual diaphragm and piston-type flush valves for toilets and urinals. Search by rough-in and gallons per flush, or describe the fixture being serviced.
Browse →Manual Motor Protectors
Manually operated motor circuit protectors that combine disconnect switching with adjustable thermal-magnetic overload and short-circuit protection sized to a specific motor's full load current, used in place of a separate disconnect and overload relay. Search by trip current range and pole count, or describe the motor and let ChatMRO match the protector.
Browse →Manual Motor Switches and Starters
Manual motor starters, motor protector switches and toggle disconnects for direct on/off control and overload protection of single and three-phase motors. Search by current rating, pole count and enclosure type, or describe the motor and application and let ChatMRO match the right switch.
Browse →Marine Wiring Accessories
Tinned-copper terminals, heat-shrink connectors, bus bars and cable glands built for marine electrical systems, sized by wire gauge and rated for saltwater and vibration exposure. Search by connector type and wire gauge, or describe your boat wiring project and let ChatMRO match parts.
Browse →Marking Chalk and Refills
Chalk line refill powder, race/soapstone chalk and marking chalk cartridges for laying out cut lines and temporary surface marks on lumber, concrete, metal and fabric. Search by color and chalk type, or describe the surface and let ChatMRO match the right chalk.
Browse →Marking Flags
Wire-stake marking flags used for utility locates, survey layout and turf marking, color-coded to APWA standards for underground utility identification. Search by flag size, wire gauge and color, or describe the marking application and let ChatMRO match the right flag.
Browse →Master Links
Grade 80 and Grade 100 master links and coupling links for connecting chain slings and hoist chain to lifting hardware, sized by chain size and rated working load limit. Search by chain grade and configuration, or describe the rigging setup and let ChatMRO match the link.
Browse →Measuring Cups
Graduated plastic, metal and glass measuring cups for accurately measuring fluids, resins, coatings and mixing ratios in shop, lab and food-service settings. Search by volume range and material, or describe the fluid being measured and let ChatMRO match the right cup.
Browse →Mechanical Conduit Benders
Hand-operated and hydraulic conduit benders that form precise offsets, saddles and 90-degree bends in EMT, rigid and IMC conduit, sized by conduit trade diameter. Search by conduit type and size, or describe the bend you need and let ChatMRO match a bender.
Browse →Mechanical Machining Shears
Powered guillotine, throatless and swing-beam shears that cut sheet and plate metal to length using a mechanically driven blade, sized by maximum cutting length and material thickness capacity. Search by blade length and capacity, or describe the sheet material and let ChatMRO match the machine.
Browse →Mechanics Length Drill Bits
Short-flute mechanics length drill bits in HSS and cobalt, sized for drilling in tight automotive, aviation and machinery clearances where standard-length bits won't fit. Search by diameter or material and let ChatMRO match the bit.
Browse →Membrane Air Dryers
Membrane-type compressed air dryers that use selective-permeation hollow-fiber membranes to remove water vapor from compressed air, for point-of-use and remote installations without electrical power. Search by flow rate and dew point requirement, or describe your compressor output and let ChatMRO match the dryer.
Browse →Metal Cutting Snips & Sheet Metal Tools
Aviation snips, straight and offset snips, nibblers and seaming tools for cutting and forming sheet metal in HVAC, roofing and fabrication work. Search by cut direction and gauge capacity, or describe the sheet material and thickness.
Browse →Metal Forming Machines
Press brakes, slip rollers, box-and-pan brakes and roll-forming machines that reshape sheet and plate metal through controlled bending or rolling rather than cutting, sized by tonnage and working length. Search by process type and capacity, or describe the material and let ChatMRO match the machine.
Browse →Microbiology and Staining Supplies
Gram stain kits, culture media, reagents and inoculation supplies for clinical, food safety and research microbiology labs, sized by format and shelf life. Search by stain or media type and application, or describe the organism or test and let ChatMRO match the supply.
Browse →Micrometer Heads
Precision micrometer heads for integration into custom fixtures, gauges and positioning stages, in standard and differential-screw designs with resolutions to 0.0001 inch or 0.001mm. Search by range and spindle thread, or describe the fixture application and let ChatMRO match the head.
Browse →Microscope Accessories
Replacement and upgrade components for compound, stereo and digital microscopes, including objective lenses, eyepieces, stage clips and illumination sources. Search by part type and microscope mount standard, or describe the microscope model and application and let ChatMRO match the right accessory.
Browse →Microscope Cameras
Digital eyepiece and C-mount cameras for capturing and measuring microscope images, sized by sensor resolution, mount type and connection interface. Search by resolution, mount size or software compatibility and let ChatMRO match the right camera.
Browse →MIG Accessories
Consumable and replacement parts for MIG (GMAW) welding guns — contact tips, nozzles, liners, diffusers and drive rolls — sized to match a specific wire diameter and gun model. Search by component type and wire diameter, or describe the MIG setup and let ChatMRO match the accessory.
Browse →Milling and Drilling Accessories
Vises, clamp kits, collets, tool holders and rotary tables for milling machines and drill presses. Search by spindle taper, T-slot size and workholding type, or describe the machine and workpiece and let ChatMRO match the accessory.
Browse →Mist Cooling Equipment
High-pressure fogging pumps, misting nozzles and outdoor evaporative cooling systems that drop ambient air temperature 10-30°F through fine water atomization. Search by pump pressure, nozzle flow rate and coverage area, or describe the application and let ChatMRO match the right system.
Browse →Mobile Oil Coolers
Air-cooled and fan-assisted oil coolers for mobile hydraulic, transmission and engine oil systems on off-highway and mobile equipment. Search by cooling capacity and mounting configuration, or describe the equipment and fluid type and let ChatMRO match the cooler.
Browse →Mobile Storage Cabinets
Lockable steel storage cabinets mounted on casters for mobile use around a shop floor, sized by width, height and shelf load capacity, with hinged, sliding or roll-up door configurations. Search by dimensions and door style, or describe the storage need and let ChatMRO match the cabinet.
Browse →Modular Drawer Cabinets
Stackable, interlocking steel drawer cabinets for tool, parts and small hardware storage, sized by drawer count, drawer height and per-drawer load capacity. Search by drawer configuration and load requirement, or describe the storage need and let ChatMRO match the cabinet.
Browse →Mop Bucket and Wringer Combinations
Combination mop buckets and wringers for commercial and institutional janitorial cleaning, in side-press, down-press and dual-chamber configurations. Search by capacity, wringer type and number of compartments, or describe the cleaning task and let ChatMRO match the combo.
Browse →Mop Buckets
Single and dual-chamber mop buckets with side-press or down-press wringers, sized for commercial and industrial janitorial use. Search by capacity and wringer type, or describe the mopping application and let ChatMRO match the bucket.
Browse →Mop Sinks
Floor-mount and wall-mount mop sinks (service basins) in molded stone, terrazzo, stainless steel and fiberglass, sized by basin capacity and mounting style. Search by material and installation type, or describe the janitorial closet layout and let ChatMRO match the sink.
Browse →Mortise Locksets
Heavy-duty mortise lock bodies, trim, and cylinders for commercial and institutional doors, sized for the deep mortise pocket cut into the door edge rather than a bored-cylinder prep. Search by lock function, grade and door thickness, or describe the door and function you need.
Browse →Motor Driven and Hand Crank Hose Reels
Motor Driven and Hand Crank Hose Reels, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Mounted Flap Wheels
Shank-mounted abrasive flap wheels for die grinders and drills, used for blending, deburring and finishing contoured and hard-to-reach surfaces, sized by wheel diameter, grit and shank size. Search by grit and application, or describe the surface being finished and let ChatMRO match the wheel.
Browse →Multi-Stage Booster Pumps and Systems
Vertical multistage centrifugal pumps and pre-packaged booster systems that raise water pressure in buildings, irrigation and process supply lines where incoming pressure alone isn't sufficient. Search by flow rate and total dynamic head, or describe your building or system and let ChatMRO match the booster.
Browse →Multi-Tools
Folding pocket tools that combine pliers, knife blades, screwdrivers and other implements into a single compact body, available in full-size and compact keychain formats with locking and non-locking blade mechanisms. Search by tool count and lock type, or describe the tasks you need covered.
Browse →Multimeter Accessories
Test leads, replacement probes, alligator clip adapters, thermocouples and clamp attachments that extend or replace the accessories bundled with a digital multimeter. Search by connector type, CAT safety rating and probe style, or describe the measurement you're taking.
Browse →Multiprocess Welders
Combination welding machines capable of MIG, TIG and stick processes from a single power source, for fabrication shops needing process flexibility without multiple dedicated machines. Search by amperage or input voltage and let ChatMRO match the welder.
Browse →Neoprene Tubing
Extruded neoprene (polychloroprene) tubing offering resistance to weathering, ozone, moderate oils and a broad temperature range, sold by inner diameter, wall thickness and durometer. Search by ID and application, or describe the media being transferred and let ChatMRO match the tubing.
Browse →Non Hazardous and Hazardous Waste Labels
Pre-printed and write-on labels used to identify waste containers per EPA RCRA and DOT hazardous materials regulations, printed on weather- and chemical-resistant stock. Search by regulation type and label material, or describe the waste stream and let ChatMRO match the label.
Browse →Nonsparking Tool Sets
Beryllium copper and aluminum bronze nonsparking tool sets for use in flammable atmospheres, in wrench, hammer, screwdriver and combination set configurations. Search by material and set composition, or describe the hazardous area classification and let ChatMRO match the set.
Browse →Nut Assortments
Boxed, multi-drawer nut assortments covering a range of nut types, thread sizes and standards in one kit, intended for shop and MRO stock rather than single-size bulk purchase. Search by nut type and thread standard, or describe the fastener need and let ChatMRO match the assortment.
Browse →Nut Driver Sets
Fixed and interchangeable nut driver sets in SAE and metric hex sizes for electrical, HVAC and light mechanical assembly work. Search by size range and shaft length, or describe the fastener sizes you're driving.
Browse →O-Ring Accessories
O-ring picks, extraction hooks, installation sleeves and compatible lubricants for removing, installing and maintaining elastomeric o-ring seals without cutting or nicking the seal. Search by tool type and application, or describe the seal size and let ChatMRO match the right accessory.
Browse →Offline Forced Air Oil Coolers
Standalone, fan-driven air-to-oil heat exchangers that cool hydraulic or lubrication oil in a separate loop from the main system, sized by heat rejection capacity and flow rate. Search by cooling capacity and voltage, or describe the system and let ChatMRO match the right cooler.
Browse →Oil Burners
Flame-retention oil burners for residential furnaces and boilers, and high-static commercial burners for larger heating systems. Search by firing rate or motor configuration and let ChatMRO match the burner.
Browse →Oil Filter Crusher
Hydraulic presses that crush used automotive and industrial oil filters flat to drain residual oil and reduce disposal volume before recycling, sized by crushing tonnage and maximum filter diameter/height. Search by crushing force and filter capacity, or describe the filter volume and let ChatMRO match the crusher.
Browse →Open End Wrench Sets
Fixed open-end wrench sets in SAE and metric sizes, single or double-ended, for general maintenance and precision fastening. Search by size range and standard, or describe the fastener sizes you work with and let ChatMRO match the set.
Browse →Open End Wrenches
Single and double open-end wrenches in SAE and metric sizes, chrome vanadium and non-sparking materials, for general maintenance, automotive and plumbing work. Search by jaw size and material, or describe the fastener you're turning.
Browse →Order Picking Carts
Multi-shelf and multi-bin picking carts for batch, zone and wave picking in warehouses and distribution centers, sized by tier count, load capacity and bin configuration. Search by number of totes, shelf count or aisle width and let ChatMRO match the right cart.
Browse →ORP Meters
Handheld, benchtop and inline oxidation-reduction potential (ORP) meters for monitoring sanitizer effectiveness and redox conditions in water treatment, pools and process fluids, with platinum-band or combination redox electrodes. Search by meter type and measurement range, or describe your process and let ChatMRO match the meter.
Browse →Oscillating Tool Accessories
Blades, sanding pads, scrapers and mount adapters for oscillating multi-tools, available in universal and manufacturer-specific mount systems for wood, metal and mixed-material cutting. Search by mount system and blade type, or describe the cutting task you need.
Browse →Ovens, Griddles, Sandwich Presses and Fryers
Commercial-grade convection ovens, flat-top griddles, panini/sandwich presses and deep fryers sized by cooking surface area, fuel type and output capacity for restaurant and institutional kitchens. Search by equipment type and capacity, or describe your kitchen's menu and volume and let ChatMRO match equipment.
Browse →Packaging and Shipping Accessories
Consumable supplies used to seal, label, cushion and secure outbound shipments, spanning tape, stretch wrap, void fill, strapping and shipping labels. Search by supply type and size, or describe the shipment and let ChatMRO match the accessory.
Browse →Packaging Tape Hand Held Dispensers
Manual tape guns that hold, tension and cut packaging tape for carton sealing, sized to standard tape widths and available with serrated or retractable blade safety guards. Search by tape width and blade type, or describe the packing station and let ChatMRO match the dispenser.
Browse →Packaging Tapes
Acrylic, hot melt and rubber-resin carton sealing tapes plus reinforced and specialty tapes, sized by width, thickness and adhesive type. Search by carton weight and application, or describe the shipping environment and let ChatMRO match the tape.
Browse →Pail and Can Handlers
Forklift-mounted and hand-operated lifting attachments for pails, cans and small drums, sized by container diameter and rated lifting capacity. Search by container type and lift method, or describe the handling application and let ChatMRO match the equipment.
Browse →Paint Applicators
Brushes, roller covers, pads and airless sprayer tips for architectural, industrial and protective coatings. Search by nap length, bristle material and coating type, or describe the surface and finish and let ChatMRO match the applicator.
Browse →Paint Booth Liners and Masking Paper
Floor and wall paint booth liners and masking paper/film for overspray containment in automotive refinishing and industrial coating operations. Search by material type and roll width, or describe your booth setup.
Browse →Paint Crayons
Solid-state paint crayons for marking hot and cold metal, castings and rough surfaces where liquid paint markers fail, sized by temperature rating and color. Search by surface and temperature, or describe the marking application and let ChatMRO match the crayon.
Browse →Paint Mixers
Pneumatic and electric drum mixers, pail mixers and handheld paddle mixers for blending paint, coatings and resins from quart cans through 55-gallon drums. Search by container size and drive type, or describe the material's viscosity and volume and let ChatMRO match the mixer.
Browse →Paint Strainers
Disposable mesh cone and bag strainers used to filter dirt, skin and debris out of paint, stain and coatings before spraying or pouring, sized by mesh count for the coating viscosity and spray equipment being used. Search by mesh size and cone or bag style, or describe the coating and let ChatMRO match the strainer.
Browse →Paint Tanks and Pressure Pots
Pressure-fed paint tanks and pots that supply spray guns with a constant, agitated material flow, sized by tank capacity, maximum working pressure and outlet configuration. Search by tank size and application, or describe the finishing job and let ChatMRO match the pot.
Browse →Painting and Finishing Tools
Brushes, rollers, spray guns and surface prep tools sized and formulated for specific coating types and substrates, from fine finish work to heavy industrial coating application. Search by application method and coating type, or describe the surface and finish you're targeting.
Browse →Pallet Positioners and Level Loaders
Scissor-lift and tilt pallet positioners that raise, lower and tilt loaded pallets to an ergonomic working height, in portable and pit-mounted configurations. Search by capacity and drive type, or describe the loading task.
Browse →Panel Indicator Lights
Panel-mount pilot lights and LED indicators used to signal machine or circuit status on a control panel face, sized to standard mounting hole diameters and rated for a specific supply voltage. Search by hole size, voltage and lens color, or describe the panel and let ChatMRO match the indicator.
Browse →Panel Mount Circuit Breakers
Panel Mount Circuit Breakers, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Panel Saw Accessories
Replacement blades, fences, guide rollers and dust collection components for vertical and horizontal panel saws used to break down full sheet goods. Search by component and saw model compatibility, or describe your panel saw and let ChatMRO match the part.
Browse →Panel Truck Accessories
Interior shelving, ladder racks, partitions and load-securing hardware built for panel truck and cargo van fitouts. Search by van size and equipment need, or describe the trade and cargo type and let ChatMRO match the accessory.
Browse →PAPR Accessories
Replacement and accessory components for powered air-purifying respirator (PAPR) systems — filters, breathing tubes, hoods/helmets and battery packs — sized and rated to match a specific PAPR blower unit's fit and airflow requirements. Search by component type and system compatibility, or describe the PAPR unit and let ChatMRO match the accessory.
Browse →Parking Curb and Speed Bump Accessories
Anchoring spikes, end caps, connector pins and reflective marking strips for rubber, concrete and plastic wheel stops and speed bumps. Search by curb material, length and anchor type, or describe the parking lot layout and let ChatMRO match the hardware.
Browse →Parts Washer Pumps
Recirculation pumps for solvent and aqueous parts washer cabinets, sized by flow rate and matched to cleaning fluid chemistry. Search by GPM, motor voltage and fluid type, or describe the parts washer you're servicing.
Browse →Patch Cords
Copper Ethernet and fiber optic patch cords used to cross-connect network equipment, patch panels and outlets in data centers, telecom rooms and structured cabling installations. Search by category/fiber type, connector and length, or describe the equipment being connected and let ChatMRO match the cord.
Browse →Patching and Repairing Compounds
Concrete patch mixes, asphalt cold patch, epoxy fillers and surface repair compounds formulated for specific substrates and cure conditions. Search by substrate and repair depth, or describe the damage you're repairing and let ChatMRO match the compound.
Browse →Pedestal Pumps
Vertical pedestal-mount pumps for machine tool coolant circulation and sump pump-down applications, sized by column length to reach basin or reservoir bottoms. Search by column length, flow rate and motor rating, or describe the tank depth and application and let ChatMRO match the right pump.
Browse →Pendant and Control Station Accessories
Enclosures, cable grips, strain reliefs and replacement push buttons for crane and hoist pendant stations and industrial machine control stations. Search by NEMA rating and station function, or describe the control panel and let ChatMRO match the accessory.
Browse →Percussion Tools
Hammers, cold chisels, punches and other impact-driven hand tools sized by head weight, striking face material and handle construction. Search by task and material, or describe the striking application and let ChatMRO match the tool.
Browse →Personnel Lifts
Scissor, articulating/telescopic boom and vertical mast lifts for elevating workers to height, rated by platform height, working outreach and load capacity. Search by lift type and reach, or describe the job site and let ChatMRO match the equipment.
Browse →Photoelectric Sensors
Optical sensors that detect an object's presence, distance or position by emitting and reading a light beam, available in through-beam, retroreflective and diffuse sensing modes with sensing ranges from millimeters to tens of meters. Search by sensing mode and range, or describe the detection application and let ChatMRO match the sensor.
Browse →Pigeonhole Bin Units
Modular compartmented storage units with rows of open square or rectangular cubbies, used for mail sorting, small parts storage and document organization, sized by compartment count and individual cubby dimensions. Search by compartment count and material, or describe the sorting or storage need and let ChatMRO match the unit.
Browse →Pilot Controlled Float Valves
Diaphragm-actuated valves that use a small pilot float mechanism to control a main valve, maintaining tank liquid level without the mechanical linkage and wear points of a direct-acting float valve. Search by pipe size and pressure rating, or describe the tank application and let ChatMRO match the valve.
Browse →Pilot Point Drill Bits
Self-centering, split-point twist drill bits that start on contact without walking or wandering, for metal, plastic and wood. Search by diameter, shank type and coating, or describe the material and hole size and let ChatMRO match the bit.
Browse →Pipe Couplings
Rigid, flexible and repair couplings joining pipe of matching or dissimilar materials. Search by pipe size and material, or describe the joint being made.
Browse →Pipe Fittings
Pipe Fittings, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Pipe Hangers and Clamps
Pipe Hangers and Clamps, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Pipe Insulation Sheets
Flat-stock closed-cell and fiber insulation sheets used to fabricate custom pipe, tank and irregular-shaped equipment insulation where preformed pipe sections don't fit. Search by material and temperature rating, or describe the equipment you're insulating.
Browse →Pipe Markers
Color-coded, legend-printed pipe markers identifying pipe contents and flow direction per ANSI/ASME A13.1, sized to wrap around pipe diameters from 3/4 in to over 24 in. Search by legend text and pipe size, or describe the piping system and let ChatMRO match the marker.
Browse →Pipe Stands and Vises
Portable stands and clamping vises that support and hold pipe stationary during cutting, threading and fitting, sized to common pipe schedules from 1/8 in to 8 in and larger. Search by pipe capacity and stand type, or describe the pipe work you're doing.
Browse →Pipe Supports
Hangers, clamps, saddles and rollers that support, guide and anchor piping runs against gravity, thermal movement and vibration. Search by pipe size, load rating and mounting type, or describe the pipe run and let ChatMRO match the support.
Browse →Planes and Shaving Tools
Bench planes, block planes, spokeshaves and drawknives for hand-fitting, smoothing and shaping wood, in cast-iron and low-angle bodies with high-carbon or A2 steel blades. Search by plane type and blade width, or describe the job — surfacing, edge jointing, chamfering — and let ChatMRO match the tool.
Browse →Plastic Chain Barrier Posts and Stanchions
Freestanding plastic posts paired with plastic link chain to form a lightweight, reconfigurable barrier line for crowd control, queue management and hazard delineation. Search by base type and post height, or describe the area you're barricading.
Browse →Plastic Chain Barriers
Lightweight plastic barrier chain for crowd control, hazard cordoning and queue management, in standard and heavy-duty link gauges. Search by link diameter, color and UV stabilization, or describe the barricading application and let ChatMRO match the right chain.
Browse →Plastic Fan Blades
Injection-molded axial and propeller-style fan blades for equipment cooling, ventilation and evaporative cooler applications, in glass-filled nylon, polypropylene and ABS. Search by blade diameter, hub bore and pitch angle, or describe the fan you're replacing and let ChatMRO match the blade.
Browse →Plastic Strapping
Polypropylene (PP) and polyester (PET) strapping for unitizing, bundling and palletizing loads, sold by width, gauge and break strength. Search by material grade and coil size, or describe the load and let ChatMRO match the right strap.
Browse →Plastic Tube Stock
Rigid and semi-rigid plastic tube stock in PVC, acrylic, polycarbonate, ABS and nylon for fabrication, machining and prototyping, sold by outer diameter, wall thickness and standard length. Search by material and dimensions, or describe the application and let ChatMRO match the stock.
Browse →Plate Casters
Rigid and swivel casters mounted via a top plate rather than a stem, bolted directly to carts, dollies, workbenches and equipment frames. Search by plate dimensions and load capacity, or describe the equipment you're fitting.
Browse →Plier Clamps
Locking plier clamps including welding clamps, sheet metal pliers and C-clamp pliers that hold workpieces under spring-loaded jaw pressure without continuous hand force. Search by jaw style, throat depth and application, or describe the clamping task and let ChatMRO match the right tool.
Browse →Plug and Switch Lockout Devices
Lockout devices for electrical plugs, circuit breakers, wall switches and pushbuttons, used to physically block re-energization during lockout/tagout (LOTO) procedures under OSHA 1910.147. Search by device type, or describe the equipment you need to lock out.
Browse →Plug-In Surge Protection Devices
Point-of-use plug-in surge protectors and suppressors rated by joule capacity and clamping voltage, for panel-mount and receptacle-level protection of sensitive equipment. Search by joule rating and outlet configuration, or describe the equipment being protected and let ChatMRO match the device.
Browse →Pneumatic and Solid Rubber Wheels
Pneumatic and Solid Rubber Wheels, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Pneumatic Blast Cabinets
Enclosed abrasive blast cabinets for surface prep, deburring and finishing, in suction-feed and pressure-feed configurations sized for benchtop to production-scale parts. Search by cabinet size and media type, or describe the parts you're blasting.
Browse →Pneumatic Modular FRL Accessories
Modular add-on components — mounting brackets, gauges, interlink kits and bowl guards — that extend or service a filter-regulator-lubricator (FRL) air preparation unit, sized by port size and module series. Search by FRL series and accessory type, or describe your air prep setup and let ChatMRO match a part.
Browse →Pneumatically Operated Drain Valves
Air-actuated drain valves that automatically purge condensate from compressed air receivers, filters and drip legs on a timed or level-sensed cycle, sized by port size and system pressure rating. Search by tank size and cycle interval, or describe your drain point and let ChatMRO match a valve.
Browse →Polarized Safety Glasses
ANSI Z87.1-rated polarized safety glasses that cut reflected glare off water, metal and pavement while retaining full impact protection, sized by lens tint and frame coverage. Search by lens color and work environment, or describe the glare condition and let ChatMRO match the glasses.
Browse →Polishing Belts
Non-woven and cloth-backed abrasive polishing belts for metal finishing, deburring and pre-buff surface prep on belt sanders and finishing machines. Search by grit range, belt width and backing material, or describe the metal and finish target and let ChatMRO match the right belt.
Browse →Polypropylene Tubing
Natural and translucent polypropylene tubing for chemical transfer, lab and process applications where PVC or polyethylene lack sufficient chemical resistance. Search by ID, wall thickness and pressure rating, or describe the fluid you're conveying.
Browse →Pool Cover Pumps
Automatic submersible pumps that remove standing rainwater from pool safety and winter covers, sized by flow rate and float-switch activation. Search by cover type and drainage need, or describe the water accumulation issue and let ChatMRO match the pump.
Browse →Portable Air Conditioner Accessories
Replacement and installation accessories for portable air conditioning units, including exhaust hoses, window venting kits, air filters and condensate drain accessories. Search by part type and unit compatibility, or describe the AC model and issue and let ChatMRO match the right accessory.
Browse →Portable Band Saws
Handheld and deep-cut portable band saws for cutting pipe, tube, rebar and structural steel on the job site or shop floor. Search by blade length, cutting capacity and power source, or describe the material and section size and let ChatMRO match the right saw.
Browse →Portable Engine Driven Pumps
Self-contained pumps powered by an integrated gasoline or diesel engine rather than electricity, used for dewatering, irrigation and fluid transfer wherever grid power isn't available. Search by flow rate and discharge size, or describe the fluid and site conditions.
Browse →Positioning and Restraint Lanyards
Adjustable work-positioning and fall-restraint lanyards for keeping workers at height tethered without free-fall exposure, sized by length and rope/webbing construction. Search by application and hook configuration, or describe the work-at-height task and let ChatMRO match the lanyard.
Browse →Poultry Netting
Electrified and non-electrified poultry netting for pasture-based flock containment and predator exclusion, sized by mesh height and post spacing. Search by netting type and flock size, or describe the containment need and let ChatMRO match the netting.
Browse →Power Hacksaw Blades
Bi-metal and high-speed-steel power hacksaw blades for reciprocating metal-cutting saws, sized by length, width and teeth-per-inch to match the material and section being cut. Search by blade length and TPI, or describe the material and let ChatMRO match the right blade.
Browse →Power Miter Saws
Compound and sliding compound miter saws for precise angled and beveled crosscuts in lumber, trim and metal stock, with blade diameters from 8 to 12 inches. Search by blade size and cut capacity, or describe the material and cut you're making.
Browse →Power Supply Cord
AC power supply cords and appliance cordsets in standard NEMA plug and connector configurations, rated by wire gauge and jacket type for equipment, appliance and industrial power connections. Search by amperage, plug type and length, or describe the equipment you're powering.
Browse →Powered Belt Conveyors
Motorized belt conveyor sections for moving cartons, totes and bulk material between workstations, sized by belt width, length and load capacity. Search by throughput and product type, or describe your line layout and let ChatMRO match a conveyor.
Browse →Precision Ball Screws
Rolled and precision-ground ball screw assemblies that convert rotary motion into linear motion with minimal backlash, used across CNC machining, positioning stages and actuator systems. Search by screw diameter, lead and accuracy grade, or describe your positioning application and let ChatMRO match the assembly.
Browse →Precision Metering Lubrication Pumps
Positive-displacement metering pumps and injectors that deliver precise, repeatable shots of grease or oil to bearings and wear points in centralized lubrication systems. Search by output volume per cycle, port count and lubricant type, or describe the machine and lube points and let ChatMRO match the right pump.
Browse →Precision Steel Squares
Hardened steel try squares, combination squares and beveled-edge squares ground to machinist tolerances for layout, inspection and setup work. Search by square type, blade length and tolerance grade, or describe the layout task you're performing.
Browse →Pressure and Vacuum Gauges
Pressure and Vacuum Gauges, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Pressure Gauge Kits
Complete pressure gauge kits with isolation valves, snubbers, and mounting hardware for hydraulic, pneumatic, boiler and HVAC pressure testing. Search by pressure range and connection size, or describe the system you're gauging.
Browse →Pressure Gauge Panel Mount Kits
Front-flange rings, U-clamps and surface mount hardware that secure a pressure gauge through a panel cutout for flush or surface-mounted instrument display. Search by dial size and mount style, or describe the panel and gauge combination you're installing.
Browse →Pressure Gauge Siphons
Pigtail and coil siphons installed between a pressure gauge and a steam or pulsating line, trapping condensate to protect the gauge's Bourdon tube from live steam temperature and pressure pulsation. Search by shape, connection size and material, or describe the line service and let ChatMRO match the siphon.
Browse →Pressure Regulators
Pressure Regulators, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Pressure Washer Surface Cleaners and Water Brooms
Rotary surface cleaner attachments and water broom bars that spread pressure washer output across a wide flat surface, cleaning concrete, pavement and decking faster and more evenly than a single spray nozzle. Search by cleaning width and pressure rating, or describe the surface and pressure washer you're using.
Browse →Pressurized Portable Eye Wash Stations
Self-contained, pressurized eyewash units that deliver a hands-free, continuous flow of flushing fluid without a plumbed water supply, sized to meet ANSI Z358.1 minimum flush duration. Search by tank capacity and mounting style, or describe the work area you need to equip.
Browse →Prewired Raceways
Factory-prewired surface raceway systems with integrated outlets, for retrofit power distribution in offices, labs and commercial spaces without opening walls. Search by circuit configuration or outlet spacing and let ChatMRO match the raceway.
Browse →Process Calibrators
Multi-function process calibrators that source and measure 4-20mA, voltage, resistance, frequency and temperature signals for instrument loop verification, sized by accuracy class and signal range. Search by signal type and required accuracy, or describe the loop being calibrated and let ChatMRO match the tool.
Browse →Progressive Cavity Pumps
Rotor-stator progressive cavity pumps for transferring viscous, shear-sensitive and abrasive-laden fluids at constant, low-pulsation flow. Search by flow rate, differential pressure and stator elastomer, or describe the fluid you need to move.
Browse →Property and Driveway Markers
Reflective driveway markers, snow stakes and property boundary markers in fiberglass, steel and PVC for winter plow guidance and property line identification. Search by height, color and mounting style, or describe the application and ground condition and let ChatMRO match the right marker.
Browse →Protective Equipment Cases
Hard-shell, waterproof and foam-lined cases for instruments, tools and sensitive equipment. Search by interior size and seal rating, or describe what you are protecting.
Browse →Protective Eyewear Accessories
Accessories for safety glasses and goggles including lens cleaning stations, eyewear retainers, anti-fog treatments and replacement lenses. Search by accessory type and compatible eyewear style, or describe the PPE program need and let ChatMRO match the right accessory.
Browse →Protective Sleeves
Cut-resistant, heat-resistant and arc-rated protective sleeves worn over the forearm, sized by ANSI cut level or ATPV rating and length. Search by hazard type and application, or describe the exposure and let ChatMRO match the sleeve.
Browse →Public Safety Vests
ANSI/ISEA 107 Class 2 and Class 3 high-visibility safety vests in mesh and solid fabric, with breakaway and standard closures, sized by fluorescent background color and reflective trim placement. Search by ANSI class and application, or describe the work environment and let ChatMRO match the vest.
Browse →Pullers and Bearing Splitters
Two-jaw, three-jaw, and hydraulic pullers along with bearing splitters for removing gears, pulleys, bearings and hubs from shafts without damaging the shaft or bore. Search by jaw configuration, spread and reach, or describe the component you're removing.
Browse →Push-On Hose Fittings
Push-Lok and multi-barb push-on hose fittings for low- and medium-pressure rubber and thermoplastic hose, sized by hose ID and thread or port connection. Search by hose type and pressure rating, or describe the fluid application and let ChatMRO match the fitting.
Browse →PVC Heater Benders
Electric radiant heaters that soften PVC conduit and pipe evenly around its circumference so it can be hand-bent to a specific angle without kinking or collapsing the wall. Search by pipe size range and heater configuration, or describe the conduit run you're bending.
Browse →Radiator Actuators and Valves
Radiator Actuators and Valves, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Radio Remote Controls
Industrial radio remote control transmitters and receivers for overhead cranes, hoists, mobile equipment and material handling machinery. Search by channel count and frequency band, or describe the equipment you're controlling.
Browse →Rain Gauges
Manual cylinder, tipping-bucket and wireless digital rain gauges for agricultural, meteorological and stormwater monitoring applications. Search by measurement resolution and mounting style, or describe your monitoring site.
Browse →Receptacle and GFCI Tester Accessories
Plug-in testers and companion accessories that verify correct outlet wiring, ground continuity and GFCI trip function on 120V and 240V circuits. Search by test function and voltage range, or describe the outlet type you need to verify.
Browse →Reciprocating Saws
Corded, battery-powered and pneumatic reciprocating saws for demolition, plumbing, remodeling and metal cutting, with stroke lengths from about 3/4 to 1-1/4 inches. Search by power source, stroke rate and blade clamp type, or describe the material you're cutting.
Browse →Reducing Bushings
Threaded and slip-fit reducing bushings that step a pipe, fitting or conduit connection down to a smaller size, sized by the larger and smaller thread or trade diameters. Search by pipe standard and material, or describe the size transition needed and let ChatMRO match a bushing.
Browse →Reflective Clothing Tape
Sew-on and heat-applied retroreflective tape used to add or restore high-visibility striping on safety apparel, rated to ANSI/ISEA 107 and sized to standard garment trim widths. Search by width, color and application method, or describe the garment and let ChatMRO match the tape.
Browse →Reflective Tape and Stickers
Engineer-grade, high-intensity and diamond-grade reflective tapes and stickers for vehicles, signage and PPE, sized by reflective grade and adhesive backing. Search by ANSI class and application, or describe the substrate and let ChatMRO match the material.
Browse →Refrigeration Solenoid Valves
Electrically actuated valves that open or close refrigerant flow in liquid and suction lines, used for pump-down control, defrost cycles and multi-evaporator systems. Search by line size, refrigerant type and coil voltage, or describe the system you're specifying for.
Browse →Relay Sockets
Panel and DIN rail mount sockets for octal, ice-cube and blade-type relays, providing a screw-terminal or solder-tail interface between the relay and field wiring. Search by pin count and mounting style, or describe the relay you're socketing.
Browse →Relief Valves
Spring-loaded relief valves for hydraulic, pneumatic and hot water systems. Search by set pressure and connection, or describe the system being protected.
Browse →Replacement Eyewear Lenses
Replacement lenses for safety glasses, goggles and face shields, sized and shaped to fit specific frame models, in clear, tinted and mirrored options with anti-fog and anti-scratch coatings. Search by frame compatibility and lens tint, or describe the eyewear you're re-lensing.
Browse →Rescue Knives and Tools
Seatbelt-cutting rescue knives, spring-loaded glass punches and combination emergency tools for vehicle extrication and first-response kits. Search by blade style and mounting, or describe the intended kit and let ChatMRO match the tool.
Browse →Resistant LED Light Fixtures
Sealed, corrosion-resistant LED fixtures rated for wash-down, wet, dusty and chemically aggressive environments, with IP65-IP69K enclosure ratings. Search by IP rating and lumen output, or describe the environment you're lighting.
Browse →Respiratory Airline Hoses
Grade-D breathing air hose assemblies that supply filtered, regulated compressed air to respirators and airline masks, sized by hose length, inner diameter and coupling style. Search by application and hose length, or describe your respiratory protection setup and let ChatMRO match a hose.
Browse →Retaining Ring Applicators
Retaining ring pliers and applicators for installing and removing internal and external snap rings, in fixed-tip and convertible configurations. Search by ring type and tip style, or describe the ring bore/shaft size.
Browse →Retaining Ring Assortments
Multi-size kits of internal, external and E-style retaining rings for axial retention on shafts and in bores, sorted by ring style and size range. Search by shaft/bore diameter and ring style, or describe your retention application and let ChatMRO match an assortment.
Browse →Reusable Ear Plugs
Washable silicone and thermoplastic ear plugs designed for repeated use across shifts, available in corded and uncorded styles with NRR ratings suited to moderate and high-noise environments. Search by NRR rating and fit style, or describe the noise environment you're protecting against.
Browse →Right Angle Drills
Corded, cordless and pneumatic right angle drills with a compact 90-degree head for drilling and driving in confined spaces where a standard drill won't fit. Search by chuck size and power type, or describe your access constraint and let ChatMRO match a drill.
Browse →Rivet Washers
Flat backup washers sized to blind and solid rivet shank diameters, used to reinforce soft, thin or brittle materials against pull-through under rivet clamping load. Search by rivet diameter and material, or describe the joint you're reinforcing.
Browse →Roof Hatch Railing Systems
OSHA-compliant guardrail systems that surround roof hatches and skylight openings, sized to hatch dimensions and mounting surface, in galvanized steel and aluminum. Search by hatch size and roof type, or describe the opening and let ChatMRO match the railing kit.
Browse →Rope Grabs
Manual and mobile rope grab devices that travel along a vertical lifeline and lock instantly under a fall, sized to a specific rope diameter and rated to ANSI Z359 or OSHA fall-arrest loads. Search by rope diameter and mobility type, or describe the lifeline and let ChatMRO match the device.
Browse →Rotary Cutters
Rotary cutting tools spanning precision fabric and material rotary blades to PTO-driven vegetation rotary cutters for tractors. Search by blade diameter, mounting type and application, or describe the material or vegetation being cut and let ChatMRO match the right cutter.
Browse →Rotary Gear Pump Heads
Replacement and OEM rotary gear pump head assemblies for viscous fluid transfer, sized by gear displacement, port size and housing material for compatibility with the driving motor or drive shaft. Search by flow rate and fluid type, or describe your pump application and let ChatMRO match a head.
Browse →Rotary Gear Pumps
Rotary Gear Pumps, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Rotary Hammer Accessories
SDS-Plus and SDS-Max drill bits, chisels, core bits and chuck adapters for rotary hammers, sized by shank type and working diameter. Search by shank system and masonry application, or describe the drilling or demolition task and let ChatMRO match the accessory.
Browse →Router Accessories
Bits, edge guides, template guide bushings, sub-bases and collets for handheld and table-mounted routers, sized to standard 1/4 in and 1/2 in shank and collet configurations. Search by accessory type and shank size, or describe the router and cut you're making.
Browse →Rubber Cord
Extruded round rubber cord stock in EPDM, nitrile, silicone and neoprene, for custom O-rings, gaskets and seals cut and bonded to length. Search by diameter or elastomer type and let ChatMRO match the cord.
Browse →Rubber Sheets and Strips
Neoprene, EPDM, silicone and nitrile sheet and strip stock for cut gaskets, seals and vibration pads, sized by thickness and durometer hardness. Search by polymer and application, or describe the seal environment and let ChatMRO match the stock.
Browse →Saddle Vents
Saddle-style vent fittings that clamp or bond onto an existing pipe or tank wall to add a venting outlet without cutting a full in-line connection, sized by saddle diameter and outlet thread. Search by pipe size and material, or describe the venting application and let ChatMRO match a fitting.
Browse →Safety Interlock Switches
Guard-locking, non-contact magnetic and RFID-coded safety interlock switches for machine guard doors and access panels, sized by safety category and locking force. Search by actuation type and PLr rating, or describe the guard application and let ChatMRO match the switch.
Browse →Sander Grinder Accessories
Backing pads, hook-and-loop and PSA sanding discs, sanding belts and grinding wheels sized to common orbital, belt and angle tools, for metal, wood and composite finishing. Search by attachment type and grit or grade, or describe the tool and material you're working.
Browse →Sanding Disc Rolls
PSA (pressure-sensitive adhesive) and hook-and-loop sanding disc rolls sized by diameter and grit for high-volume production sanding without the cost of individually packaged discs. Search by grit range and attachment type, or describe your sanding application and let ChatMRO match the roll.
Browse →Sanding Sheet Hand Pad Holders and Blocks
Rigid and cushioned hand blocks that hold quarter-sheet, half-sheet or roll-cut sandpaper flat and taut for manual sanding, in clamp, hook-and-loop and clip-grip styles. Search by sheet size and backing material, or describe the surface you're finishing by hand.
Browse →Santoprene Tubing
Thermoplastic vulcanizate (TPV) tubing prized for peristaltic pump flex-fatigue life and broad chemical resistance across acids, bases and many solvents. Search by ID, wall thickness and durometer, or describe the fluid and pump type.
Browse →Scale Accessories
Calibration weights, load cells, digital indicators and platform components for industrial and commercial weighing scale maintenance and calibration. Search by component type and scale capacity, or describe the scale and let ChatMRO match the part.
Browse →Scissor Lift Carts
Manual hydraulic and electric-actuated scissor lift carts for raising and positioning loads at a working height, in capacities from 300 lb bench units to 2,000+ lb mobile platforms. Search by capacity and lift height, or describe the application and let ChatMRO match the cart.
Browse →Scoop Shovels
Wide, curved-blade shovels for moving loose bulk material — grain, snow, gravel, sand and coal — designed to move higher volume per pass than a standard digging spade. Search by blade width and material, or describe the material you're moving.
Browse →Scratch Brushes
Hand-held wire scratch brushes for rust removal, weld cleanup and surface preparation before coating or plating, in steel, stainless steel and brass wire fill. Search by wire material, handle style and number of rows, or describe the surface prep task and let ChatMRO match the right brush.
Browse →Screw Pitch Gauges
Folding blade gauges for identifying unknown screw and bolt threads by matching blade profile to the mating thread, covering metric, UNC/UNF and BSW/BSP standards. Search by thread standard and blade range, or describe the fastener you're trying to identify.
Browse →Screwdriver Bits and Nutsetters
Insert bits, power bits and magnetic nutsetters in Phillips, slotted, Torx, hex and square drive types, for hand tools, impact drivers and drills. Search by drive type, size or shank style.
Browse →Scroll Saw Blades
Pin-end and plain-end scroll saw blades in a range of TPI counts for wood, metal, plastic and reverse-tooth applications. Search by TPI and material compatibility, or describe the material thickness you're cutting.
Browse →Scroll Saws
Benchtop scroll saws for intricate woodworking, marquetry and fine metal cutting, with variable speed and pinned or plain-end blade compatibility. Search by throat capacity and blade type, or describe the cutting work.
Browse →Scullery Sinks
Heavy-gauge stainless steel scullery sinks sized by basin count and dimensions for high-volume pot, pan and equipment washing in commercial kitchens. Search by basin configuration and NSF certification, or describe your kitchen layout and let ChatMRO match the sink.
Browse →Security Identification Supplies
ID badges, lanyards, badge holders and proximity/RFID access credentials for facility identification and access control programs. Search by badge material and access technology, or describe your facility's ID program and let ChatMRO match the supplies.
Browse →Self Locking Inserts
Threaded inserts that combine a wire-thread or solid-bushing repair insert with a built-in prevailing-torque locking feature, resisting vibration loosening without a separate lock washer or thread-locking compound. Search by thread size, locking mechanism and base material, or describe the assembly and let ChatMRO match the right insert.
Browse →Service Jacks
Hydraulic floor jacks, bottle jacks and transmission jacks rated from 1.5 to 50+ tons for vehicle and equipment service. Search by capacity, minimum/maximum lift height and jack type, or describe the vehicle and lift task and let ChatMRO match the right jack.
Browse →Serving Trays and Platters
Cafeteria trays, catering platters and bussing trays in polypropylene, fiberglass, stainless steel and melamine, sized for institutional foodservice, catering and restaurant use. Search by material and size, or describe the foodservice setting you're outfitting.
Browse →Shadow Boards
Pegboard, foam-insert and magnetic shadow boards that outline each tool's storage spot for 5S visual management, sized for wall mount or mobile carts. Search by board material and tool set, or describe the tools you need shadowed and let ChatMRO match a layout.
Browse →Sheet Metal Notchers
Manual, hydraulic and pneumatic sheet metal notchers for corner and V-notching in duct, box and enclosure fabrication. Search by notch capacity or drive type and let ChatMRO match the notcher.
Browse →Single Grit Sharpening Stones
Individual-grit oil, water and diamond sharpening stones ranging from coarse edge-setting grits to fine polishing grits, sized by grit number and abrasive type. Search by grit range and blade material, or describe the sharpening task and let ChatMRO match the stone.
Browse →Sink Drains
Basket strainer assemblies, drain bodies and tailpiece fittings for kitchen, bar, laboratory and utility sinks, in stainless steel, PVC and brass. Search by outlet size and sink type, or describe the installation and let ChatMRO match the drain.
Browse →Sinker Nails
Vinyl-coated and bright steel sinker nails with a smaller, checkered head designed to countersink flush without splitting framing lumber. Search by coating, gauge and length, or describe the framing application and let ChatMRO match the right nail.
Browse →Sliding Door Locks
Latch, hook, mortise and keyed locks for aluminum and vinyl patio doors, sliding cabinet doors and industrial sliding panels. Search by door thickness, mounting style and locking mechanism, or describe the sliding door you're securing.
Browse →Slump Tester Accessories
Slump cones, base plates, tamping rods and rulers for concrete slump testing per ASTM C143 and AASHTO T119. Search by component type and material, or describe your testing setup and let ChatMRO match the part.
Browse →Smoking Shelters
Freestanding and wall-mounted smoking shelters with polycarbonate or metal roofing, sized to accommodate small groups at commercial, industrial and institutional facilities. Search by capacity and mounting style, or describe the site and weather exposure you're building for.
Browse →Snips Shears and Scissors
Aviation snips, tin snips, bench shears and industrial scissors sized to specific sheet metal thicknesses and cutting geometries. Search by cut direction, blade material and maximum material thickness, or describe the cutting task and let ChatMRO match the right tool.
Browse →Socket Bits
Insert bits and bit sockets in hex, Torx, square and spline drive, sized to fit standard 1/4, 3/8 and 1/2 in drive tools and bit holders. Search by tip type and drive size, or describe the fastener you're driving.
Browse →Soft Starts
Reduced-voltage motor soft starters for AC induction motors, controlling inrush current and mechanical shock during startup in pumps, fans, compressors and conveyors. Search by motor horsepower, voltage or enclosure rating.
Browse →Soil Compaction Testers
Pocket penetrometers, cone penetrometers and nuclear/non-nuclear density gauges for measuring soil compaction and bearing capacity in construction, geotechnical and agricultural applications. Search by test method or reading range.
Browse →Soil Tester Accessories
Replacement pH probes, moisture sensors, electrodes and calibration solutions sized to common handheld and benchtop soil testing instruments, for agricultural, horticultural and environmental testing. Search by probe type and instrument compatibility, or describe your testing application.
Browse →Soil Testing Probes
Handheld and datalogging soil probes measuring pH, moisture, temperature and nutrient levels for agricultural, turf management and environmental testing. Search by measurement type, probe length and readout, or describe the testing application and let ChatMRO match the probe.
Browse →Solenoid Air Control Valves
Solenoid-actuated pneumatic control valves in 2-way, 3-way and 4-way configurations. Search by voltage and port size, or describe the actuator being controlled.
Browse →Solenoid Valve Manifold Accessories
Sub-bases, blanking plates, end plates and mounting kits for pneumatic solenoid valve manifolds (ISO 15407-2, ISO 5599-2, and manufacturer-specific banks). Search by manifold series, station count and port size, or describe the valve bank you're building out.
Browse →Specialty Hand Trucks
Purpose-built hand trucks engineered for specific loads and environments: drum trucks, appliance dollies, stair-climbing trucks and convertible models. Search by application and load capacity, or describe what you're moving.
Browse →Specialty Levels
Purpose-built levels beyond the standard carpenter's level — torpedo, post, machinist, box and digital electronic levels — for tight-space, precision and trade-specific leveling tasks. Search by level type, length and accuracy, or describe the leveling task and let ChatMRO match the tool.
Browse →Specialty Mats
Anti-fatigue, anti-static (ESD), welding spatter-resistant and drainage matting for industrial, laboratory and commercial floor applications. Search by mat function, material and thickness, or describe the work area and hazard and let ChatMRO match the mat.
Browse →Specialty Sanders
Detail sanders, oscillating spindle sanders, profile sanders and contour sanding tools for work that a standard belt or orbital sander can't reach. Search by sanding style or application and let ChatMRO match the tool.
Browse →Spectacle Kits and Lens Covers
Two distinct product families under one search: spectacle blind (line blind) kits for pipeline isolation, sized by pipe diameter and pressure class, and replacement lens covers for safety spectacles. Search by pipe size or lens type, or describe your application and let ChatMRO match the product.
Browse →Speed Reducers and Gear Drive Accessories
Worm, helical, planetary and shaft-mounted speed reducers plus accessories like backstops, torque arms and shaft couplings, sized by reduction ratio and output torque. Search by ratio and motor frame size, or describe the drive application and let ChatMRO match the unit.
Browse →Spill Berms
Collapsible and rigid-wall spill berms for temporary secondary containment of drums, totes and equipment, in PVC, urethane and steel-frame construction. Search by capacity and footprint, or describe what you're containing.
Browse →Spiral and Tube Brushes
Twisted-in-wire brushes for cleaning, deburring and polishing the inside of bores, tubes, pipes and small-diameter holes, available in wire, nylon and abrasive-nylon fill. Search by bore diameter and fill material, or describe the tube ID and contamination you're removing.
Browse →Splice Connectors
Butt splices, heat-shrink and step-down splice connectors for joining stranded or solid copper conductors, sized by AWG and rated by insulation and environmental sealing. Search by wire gauge and splice style, or describe the application and let ChatMRO match the right connector.
Browse →Split Bolt Connectors
Copper and copper-alloy split bolt connectors for tapping or splicing bare and stranded conductors, sized by AWG/kcmil range under UL 486A/B. Search by conductor range and run/tap combination, or describe the cable sizes you're joining.
Browse →Spring Anchors
Wall, floor and frame-mount anchors for retaining and pre-tensioning extension springs, screen door springs and garage door extension springs. Search by mounting style and spring wire diameter, or describe the installation you're anchoring.
Browse →Spring Clamps
Steel spring clamps that hold work pieces with constant clamping force from a compressed spring, releasing instantly with one-hand squeeze operation. Search by jaw opening, clamping force and tip material, or describe the clamping task and let ChatMRO match the clamp.
Browse →Sprinkler Heads
Fire suppression sprinkler heads rated by temperature and response, alongside landscape irrigation heads sized by coverage radius and spray pattern. Search by head type, orientation and rating, or describe the system and let ChatMRO match the right sprinkler head.
Browse →Sprinkler Wire and Irrigation Cable
Direct-burial, UF-rated control wire for connecting irrigation controllers to solenoid valves, in single and multi-conductor configurations. Search by AWG gauge, conductor count and jacket color, or describe the zone count and wire run and let ChatMRO match the right cable.
Browse →Square Standoffs
Male-female and female-female square standoffs used to space and mount PCBs, panels and enclosures, sized by thread size, length and material. Search by thread type and standoff length, or describe the mounting application and let ChatMRO match the part.
Browse →Squeegee Handles
Threaded, snap-on and telescoping squeegee handles in aluminum, fiberglass and steel, for window cleaning, floor squeegees and facility maintenance. Search by thread type, length or material.
Browse →Squeegee Replacement Blades and Refills
Replacement rubber blades and channel refills for floor squeegees, window squeegees and floor scrubber machines, in gum rubber, neoprene and linatex compounds. Search by blade length and mount style, or describe the equipment you're refilling.
Browse →Stack Racks
Nestable, foldable and rigid welded-wire steel stacking racks for warehousing bulky or irregular loads above the floor, sized by footprint and stacked load capacity. Search by footprint, capacity and collapsibility, or describe the load and let ChatMRO match the right rack.
Browse →Stainless Steel Butt Weld Pipe Fittings
Butt weld elbows, tees, reducers and caps in 304/304L and 316/316L stainless steel, in Schedule 10, 40 and 80 wall thicknesses per ASME B16.9. Search by fitting type and pipe schedule, or describe the piping spec and let ChatMRO match the fitting.
Browse →Stainless Steel Grating
Welded and swage-locked stainless steel bar grating in 304 and 316 grades, for walkways, platforms and trench covers in corrosive or washdown environments. Search by bar spacing and load rating, or describe the span and environment and let ChatMRO match the grating.
Browse →Stainless Steel Push Fit Pipe Fittings
Grip-ring push-to-connect fittings in 304 and 316 stainless for copper, PEX and stainless tube, installed without soldering, clamping or threading. Search by pipe size and fitting configuration, or describe the run you're connecting.
Browse →Stainless Steel Rod Stock
Round bar stock in 304, 316/316L, 17-4PH and other stainless grades, in mill, ground and polished finishes, for machining, fabrication and corrosive-environment components. Search by grade, diameter or length.
Browse →Standby Generators (Liquid Cooled)
Liquid-cooled standby generators providing automatic backup power for commercial and industrial facilities, sized well beyond what air-cooled units can sustain. Search by kW rating, fuel type and enclosure, or describe the facility load and let ChatMRO match the generator.
Browse →Staples and Brad Nails
Pneumatic and manual staples and brad nails in a range of gauges, crown widths and leg lengths, for upholstery, trim carpentry, roofing felt and packaging. Search by tool compatibility, gauge or fastener length.
Browse →Stationary Electric Air Compressors
Fixed-base electric-driven reciprocating and rotary screw air compressors for continuous shop and plant compressed air supply, in single-stage, two-stage and variable-speed configurations. Search by CFM and horsepower, or describe the air demand and let ChatMRO match the compressor.
Browse →Steel Wool
Graded steel wool pads and rolls from coarse to ultra-fine, for metal finishing, surface preparation and general cleaning applications. Search by grade or form factor and let ChatMRO match the product.
Browse →Stencil Ink
Quick-drying, porous-surface stencil inks formulated for marking wood crates, cardboard, drums and metal through a cut stencil. Search by color and surface compatibility, or describe your marking application and let ChatMRO match the ink.
Browse →Stencils and Stencil Sets
Interlocking letter and number stencil sets, brass and steel marking stencils, and pipe/duct marking kits for industrial labeling and identification. Search by character height, material and application, or describe the marking task and let ChatMRO match the right stencil.
Browse →Step Key Stock
Precision-ground and cold-drawn key stock in standard square and rectangular sizes for shaft-to-hub keyway connections. Search by width, height and material grade, or describe the shaft diameter you're keying.
Browse →Stick Welders
Shielded metal arc welding (SMAW/stick) machines for construction, repair and field welding, from lightweight inverter units to heavy-duty transformer-based machines. Search by amperage output, duty cycle and power input, or describe the electrode and material and let ChatMRO match the welder.
Browse →Stir Bars
PTFE-coated magnetic stirring bars in octagonal, cylindrical, cross and triangular profiles for bench-top stirrers and stirring hot plates. Search by length, diameter and vessel type, or describe the mixing application and let ChatMRO match the right bar.
Browse →Stock Carts
Wire, plastic and steel-shelf stock carts for transporting inventory, tools and materials across warehouses, retail floors and facilities. Search by weight capacity, shelf count or wheel type.
Browse →Stock Tanks
Galvanized steel and polyethylene stock tanks for livestock watering and general agricultural liquid storage, in round and oval shapes across a range of capacities. Search by material, capacity or shape.
Browse →Stop and Waste Valves
Stop and waste valves that shut off and drain downstream water lines in a single operation, for outdoor hose bibs, irrigation systems and freeze-prone plumbing runs. Search by pipe size, material or connection type.
Browse →Storage and Dispensing Bins
Stackable storage bins and gravity-flow hopper-front dispensing bins for small parts organization, hardware storage and bulk material picking. Search by capacity and dispensing style, or describe your storage need and let ChatMRO match the bin.
Browse →Storage Buildings
Prefabricated steel, wood and modular storage buildings for equipment, inventory and material storage, sized by footprint and foundation requirement. Search by size, wall material and door configuration, or describe the storage need and let ChatMRO match the right building.
Browse →Storage Trunks and Site Boxes
Steel and aluminum storage trunks and site boxes for job site tool storage and equipment security, from truck-mounted crossover boxes to freestanding jobsite containers. Search by size and mounting style, or describe the storage need.
Browse →Storm & Wastewater Samplers
Automatic and portable samplers for stormwater and wastewater monitoring, using peristaltic and vacuum sampling methods for composite and grab sample collection. Search by sampling method and application, or describe your monitoring program.
Browse →Strapping Machines
Semi-automatic, automatic and hand-tool strapping machines and tools for securing pallets, cartons and bundles with poly, polyester or steel strapping. Search by strap type and automation level, or describe your packaging line's throughput.
Browse →Stretch Wrap Machines
Turntable, rotary-arm and orbital stretch wrap machines that secure palletized loads with pre-stretched film, sized by turntable weight capacity and load height. Search by throughput and load type, or describe the pallet size and let ChatMRO match a wrapper.
Browse →Striking and Slugging Wrenches
Heavy-duty single and double hex striking wrenches designed to be hit with a hammer or sledge to break loose or torque high-strength bolted joints. Search by hex size and wrench style, or describe the bolt size and application and let ChatMRO match the wrench.
Browse →String Trimmers
Gas, corded-electric and battery string trimmers in straight-shaft and curved-shaft configurations, sized by cutting swath and engine displacement or battery voltage. Search by power source and application, or describe the terrain and let ChatMRO match the right trimmer.
Browse →Strip Doors
PVC strip curtains and replacement strips for doorways, cold storage rooms and loading docks, in standard, low-temperature and welding-grade materials. Search by strip width, opening size or temperature rating.
Browse →Structural Framing System Accessories
Brackets, connectors, end caps, channel nuts and splice plates for slotted steel channel framing systems (unistrut-style), sized to standard 13/16in and 1-5/8in channel profiles. Search by channel size and fitting function, or describe the structure you're assembling.
Browse →Stud Finders
Electronic capacitance, magnetic and multi-scan stud finders that locate framing members, metal and live wiring behind drywall and plaster, sized by scan depth and detection mode. Search by wall type and detection need, or describe the job and let ChatMRO match the tool.
Browse →Submerged Arc Welding Wire
Solid and metal-cored electrode wire for submerged arc welding (SAW), classified to AWS A5.17 and A5.23, in diameters from 1/16 in to 5/32 in for carbon steel, low-alloy and stainless applications. Search by AWS classification and diameter, or describe the base material and joint.
Browse →Submersible Well Pumps
Multi-stage centrifugal submersible pumps sized to well casing diameter, rated flow and total dynamic head for residential, agricultural and municipal water wells. Search by well diameter and flow rate, or describe the well depth and use and let ChatMRO match the pump.
Browse →Suction Diffuser Strainers
Combination suction diffuser strainers that straighten turbulent flow and filter debris immediately ahead of a centrifugal pump's suction inlet, replacing separate elbow, strainer and reducer fittings in one fitting. Search by pipe size and mesh rating, or describe your pump and piping layout and let ChatMRO match the strainer.
Browse →Suction Line Accumulators
Suction line accumulators sized to protect compressors from liquid refrigerant slugging and oil starvation across HVAC, refrigeration and heat pump systems. Search by connection size or system tonnage and let ChatMRO match the accumulator.
Browse →Surface Protection Films
Self-adhesive protective films for metal, glass, plastic and flooring surfaces, in low, medium and high-tack adhesion levels rated for indoor, outdoor and UV-exposure durations. Search by substrate, adhesion level or exposure duration.
Browse →Swivel Joints
Single and multi-passage rotating swivel joints that allow hydraulic, pneumatic and process fluid lines to rotate continuously without twisting or kinking the connected hose or pipe. Search by port configuration, pressure rating and media type, or describe your rotating equipment and let ChatMRO match the swivel joint.
Browse →Syringe Filters
Single-use, syringe-mounted membrane filters for clarifying samples, removing particulates, and preparing solutions ahead of HPLC and other analytical instrumentation. Search by membrane material, pore size and diameter, or describe the sample and let ChatMRO match the filter.
Browse →Table Accessories
Casters, leg levelers, edge trim, power strips, shelving and other add-on components for workbenches, shop tables and production tables. Search by accessory function and mounting type, or describe the table you're outfitting.
Browse →Take-Up Units
Mounted bearing assemblies that slide within a frame to adjust shaft position for belt or chain tensioning, available in horizontal and vertical travel styles with ball or roller bearing inserts. Search by bore size and frame type, or describe the drive and adjustment range you need.
Browse →Tapered Corks
Tapered rubber and natural cork stoppers sized by standard stopper number series, used to seal laboratory flasks, test tubes, tubing ends and small industrial vessels. Search by stopper size and material, or describe the opening diameter and let ChatMRO match the stopper.
Browse →Tapping Heads
Self-reversing and tension-compression tapping heads for CNC machining centers, drill presses and manual tapping arms. Search by tap size range, shank type and reversing mechanism, or describe the tapping application and let ChatMRO match the right head.
Browse →Task Chairs
Ergonomic task chairs with adjustable seat height, lumbar support and armrests for office, laboratory bench and light industrial workstation use, sized by weight capacity and duty cycle. Search by adjustability features, upholstery type and base material, or describe the workstation and let ChatMRO match the chair.
Browse →Temperature Controllers
Temperature Controllers, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Thread Turning Tools
Single-point external and internal threading inserts and toolholders for cutting precise ISO, UN and ACME thread forms on CNC and manual lathes. Search by thread form, insert grade and toolholder shank size, or describe the thread pitch and material and let ChatMRO match the tooling.
Browse →Threading Inserts
Indexable carbide threading inserts ground to ISO metric, UN and ACME thread profile angles for CNC and manual lathe single-point threading. Search by thread form, insert size code and carbide grade, or describe the pitch and material and let ChatMRO match the insert.
Browse →Three Phase Transformers
Dry-type and oil-filled three phase distribution transformers for industrial power distribution and voltage conversion. Search by kVA rating, primary/secondary voltage and winding configuration, or describe the load and let ChatMRO match the transformer.
Browse →TIG Torches
Air-cooled and water-cooled TIG torch assemblies rated by amperage capacity across standard series like 17, 18, 20 and 26, for manual and automated GTAW welding. Search by amperage, cooling type and series, or describe your welding application and let ChatMRO match the torch.
Browse →TIG Welding Accessories
Collets, collet bodies, gas cups, back caps, tungsten electrodes and foot pedals sized to standard TIG torch series like the 17/18/26. Search by torch series and component, or describe the torch you're outfitting and let ChatMRO match the parts.
Browse →Tilt Trucks
Steel and heavy-duty polyethylene tilt trucks for moving and dumping scrap, chips, trim waste and bulk material, in capacities from roughly 0.5 to 2 cubic yards. Search by capacity, caster type and dumping mechanism, or describe the material you're moving.
Browse →Tire Repair Tools
Plug kits, reamers, tire spoons, bead breakers and vulcanizing tools for repairing punctures in passenger, light truck and off-road tires. Search by repair method and tire class, or describe the puncture and let ChatMRO match the tool.
Browse →Tire Valve Caps and Extensions
Dust caps, sealing caps and rigid or flexible extensions for tire valve stems on passenger, commercial and off-road wheels. Search by valve stem thread and extension length.
Browse →Tire Valve Stems and Cores
Rubber snap-in, metal clamp-in and high-pressure valve stems with matched valve cores, for passenger, truck and industrial tire applications. Search by stem length and rim hole size, or describe the wheel and let ChatMRO match the part.
Browse →Toggle Clamp Spindle Assemblies
Replacement and adjustable spindle assemblies for horizontal and vertical toggle clamps. Search by thread size and clamp compatibility, or describe the fixture.
Browse →Toilet Brushes and Holders
Commercial-grade toilet bowl brushes and wall-mount or freestanding holders sized for facility restroom maintenance programs. Search by bristle type and holder style, or describe your janitorial supply needs and let ChatMRO match the product.
Browse →Tool Belts, Work Belts, Aprons and Suspenders
Trade-specific tool belts, rigs, aprons and load-bearing suspenders sized to the tool load and pouch configuration of framing, electrical, plumbing and finish carpentry work. Search by trade, pouch count and material, or describe the tools you carry and let ChatMRO match the right rig.
Browse →Tool Holders and Replacement Cases
Molded and fabricated cases, holsters and organizer inserts sized to specific hand and power tools for storage, transport and job-site organization. Search by tool type, case material and mounting style.
Browse →Tool Post Grinder Accessories
Spindles, grinding wheels, wheel guards and mounting brackets for tool post grinders used on lathes for internal and external precision grinding. Search by spindle taper, wheel bore or lathe compatibility.
Browse →Tool Posts
Quick-change and standard lantern-style tool posts for engine lathes, sized to swing capacity from mini-lathes to heavy production machines. Search by post system (AXA/BXA/CXA), swing range and holder type, or describe your lathe's swing and let ChatMRO match the tool post.
Browse →Torque Arms
Reaction torque arms that restrain shaft-mounted speed reducers from rotating with the driven shaft, transferring reaction torque to a fixed mounting point instead. Search by reducer frame size and reaction load, or describe your drive setup and let ChatMRO match the torque arm.
Browse →Torque Multiplier Accessories
Reaction arms, impact sockets, drive adapters and input hex tools that extend or support torque multipliers used on high-torque bolting applications. Search by drive size and reduction ratio, or describe the multiplier model and let ChatMRO match the accessory.
Browse →Track Ladder Accessories
Rail track, rollers, hooks and mounting hardware for rolling library-style ladders used to access high shelving. Search by track profile, ladder hook style and mounting surface.
Browse →Traffic Barricade and Traffic Cone Accessories
Reflective collars, warning lights, sandbags and connector bars for traffic cones and barricades, sized to standard 18-36 inch cones and Type I-III barricades. Search by accessory type and cone/barricade size, or describe the traffic control setup and let ChatMRO match the accessory.
Browse →Traffic Barricades
MUTCD-compliant Type I, II and III barricades used to channel traffic, mark closures and warn of hazards on roadways and jobsites. Search by barricade type, material and reflectivity, or describe the traffic control application and let ChatMRO match the barricade.
Browse →Traffic Doors
Flexible impact traffic doors in polyethylene and polyurethane panels, sized to standard and custom door openings, for forklift and pedestrian traffic between warehouse zones. Search by opening size and impact rating, or describe the traffic type and temperature zone.
Browse →Trailer Hitch Balls
Hitch balls in standard 1-7/8in, 2in and 2-5/16in diameters, matched to shank size and gross trailer weight rating, in chrome-plated steel, stainless steel and interchangeable ball-mount styles. Search by ball diameter and towing capacity, or describe the trailer and tow vehicle you're matching.
Browse →Trailer Hitches and Step Bumper Hitches
Weight-carrying and weight-distributing receiver hitches and step bumper hitches spanning Class I through Class V, sized to gross trailer weight and tongue weight. Search by receiver size and towing capacity, or describe the vehicle and trailer and let ChatMRO match the hitch.
Browse →Trailer Locks
Coupler locks, hitch pin locks and king pin locks securing trailers against theft and unauthorized towing, in sizes matched to standard ball coupler, receiver pin and fifth-wheel king pin dimensions. Search by coupler size and lock type, or describe the trailer and let ChatMRO match the lock.
Browse →Trailer Stabilizing Jacks
Screw-drive and hydraulic stabilizing jacks that support a trailer's front end when uncoupled from the tractor, or stabilize the trailer body during loading, rated by static and dynamic lift capacity. Search by capacity and mounting type, or describe the trailer type and let ChatMRO match the jack.
Browse →Trench Drain Accessories
Grates, end caps, outlet fittings and connectors sized to match specific trench drain channel widths and systems. Search by component type and material, or describe your trench drain system and let ChatMRO match the accessory.
Browse →Trench Drains
Linear channel drainage systems for industrial floors, parking areas and site work, in polymer concrete, HDPE and stainless steel with load-rated grates from pedestrian to heavy traffic. Search by channel material and load class, or describe the drainage area.
Browse →Truck Box and Jobsite Box Accessories
Locks, mounting kits, organizer trays, gas struts and drain plugs for pickup truck tool boxes and portable jobsite boxes. Search by box type, mounting style or replacement part.
Browse →Truck Boxes
Crossbed, side-mount and underbody truck boxes for secure tool and equipment storage on pickups and service trucks. Search by mounting style, material and bed length, or describe the truck and let ChatMRO match the box.
Browse →Truss Nails
Hot-dip galvanized and bright common truss nails sized for roof truss connector plates, hurricane ties and structural wood framing connections. Search by shank diameter, length and coating type, or describe the connector hardware you're fastening and let ChatMRO match the nail.
Browse →Twist Lock Receptacles
Rotating-blade locking receptacles that prevent accidental disconnection under vibration or tension, used in industrial, stage and outdoor power applications. Search by NEMA L-series configuration, amperage and voltage.
Browse →Ultrasonic Thickness Gauge Accessories
Transducers, couplant gel, calibration blocks and cables for ultrasonic thickness gauges used in corrosion and wall-thickness inspection. Search by transducer frequency and material application, or describe the inspection task and let ChatMRO match the accessory.
Browse →Unmounted Linear Bearings
Ball bushing (linear ball) bearings sold without a housing, sized by bore diameter to slide directly onto a round shaft for precision linear motion. Search by bore diameter and load rating, or describe your shaft and motion application and let ChatMRO match the bearing.
Browse →Utility Sinks and Laundry Tubs
Freestanding, wall-mount and cabinet-base utility sinks in molded composite, stainless steel and cast iron, sized by basin count and depth for shop, laundry and facility use. Search by material and mount style, or describe the installation and let ChatMRO match the sink.
Browse →UV Leak Detector Accessories
Fluorescent dye, injector kits, UV inspection lamps and enhancement glasses used together to locate refrigerant, oil and coolant leaks that are invisible under normal light. Search by system type and dye compatibility, or describe your leak detection task and let ChatMRO match the accessory.
Browse →Variable Frequency Drives
Variable Frequency Drives, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Vector Motors
Vector duty induction motors built for closed-loop VFD control, with encoder feedback, wide constant-torque speed ranges and inverter-grade insulation. Search by horsepower and base speed, or describe the drive application and let ChatMRO match the motor.
Browse →Vehicle Cleaning & Car Wash Brushes
Wash brushes, wheel brushes, detailing brushes and mitts for vehicle exterior and interior cleaning, in soft synthetic, natural fiber and boar's hair bristle types. Search by bristle material and application area, or describe the surface you're cleaning.
Browse →Vernier Calipers
Vernier Calipers, indexed by the specs that actually distinguish one from another. Search by size and spec, or describe the application and let ChatMRO match it.
Browse →Vertical Pump Motors
Hollow-shaft and solid-shaft vertical motors built with thrust bearings rated to carry pump impeller and water column loads, sized for vertical turbine, submersible and inline pump applications. Search by horsepower, thrust capacity and shaft type, or describe your pump's total dynamic head and let ChatMRO match the motor.
Browse →Vial Top Crimpers and Decrimpers
Manual hand crimpers, pneumatic crimping tools and decrimpers sized for standard 11mm, 13mm and 20mm crimp caps, for sealing and opening lab, GC/HPLC and pharmaceutical vials. Search by cap size and tool type, or describe your throughput and vial format.
Browse →Vibration Absorbers
Rubber, spring and pad-style vibration isolators and absorbers for isolating rotating and reciprocating equipment from supporting structures. Search by static load capacity and isolation type, or describe the equipment you're isolating.
Browse →Voice Data Patch Cords
Copper and fiber patch cords for structured cabling connections between network equipment, patch panels and end devices. Search by category rating, length and connector type, or describe the network application and let ChatMRO match the right cord.
Browse →Voltage and Continuity Testers
Non-contact voltage detectors, two-pole voltage testers and continuity testers for verifying circuits are live or de-energized before electrical work, rated by voltage range and IEC CAT safety category. Search by voltage range and CAT rating, or describe the electrical work and let ChatMRO match the tester.
Browse →Wall Packs and Wall Mount Fixtures
LED wall pack and wall-mounted exterior fixtures for building perimeter, security and parking area lighting, sized by lumen output, wattage and photocell control. Search by lumen output, mounting configuration and dark-sky compliance, or describe the area you're lighting and let ChatMRO match the fixture.
Browse →Wall Protection Accessories
Corner guards, crash rails, wall bumpers and handrail-integrated protection systems in PVC, stainless steel and high-density polyethylene, for facilities, healthcare and warehouse corridors. Search by impact zone, mounting method or material.
Browse →Wardrobe Lockers
Steel single and double-tier wardrobe lockers sized for full-height garment and gear storage, with options for ventilation, locking style and finish, for employee, gym and institutional use. Search by tier configuration and dimensions, or describe your facility's storage needs.
Browse →Warning Whips
LED-lit and flag-topped safety whips in fiberglass and spring-steel construction, sized by overall length and mount type, for improving vehicle visibility on dunes, job sites and mine sites. Search by length and mounting base, or describe the vehicle you're outfitting.
Browse →Wash Fountain Parts
Repair and replacement parts for multi-station circular and semi-circular wash fountains used in industrial and institutional restrooms. Search by fountain brand, valve type and basin diameter, or describe the wash fountain model and let ChatMRO match the right part.
Browse →Wash Fountains
Circular and semi-circular multi-station wash fountains in stainless steel and terrazzo, for high-volume handwashing in industrial, institutional and food-processing facilities. Search by user capacity or basin material and let ChatMRO match the fountain.
Browse →Washing Machine Valves
Solenoid-operated water inlet valves that control hot and cold fill on residential and commercial washing machines, sized by voltage, port configuration and flow rate. Search by valve voltage, number of ports and thread size, or describe your washer's model and let ChatMRO match the replacement valve.
Browse →Water Baths
Digital and analog laboratory water baths with circulating and non-circulating designs, sized by tank capacity and temperature range, for incubation, sample thawing and reagent warming. Search by temperature range and capacity, or describe your application and sample throughput.
Browse →Water Cooled Oil Coolers
Shell-and-tube heat exchangers that reject heat from hydraulic or lubrication oil into a water cooling circuit, sized by heat rejection capacity and oil/water flow rates. Search by capacity and connection size, or describe your system's heat load and let ChatMRO match the cooler.
Browse →Water Detection and Shut Off Systems
Leak detection sensors paired with automatic shutoff valves that stop water flow when a leak is detected, protecting property from water damage. Search by valve pipe size, sensor type and connectivity.
Browse →Water Heater Accessories
Anode rods, temperature and pressure relief valves, heating elements and expansion tanks for residential and commercial water heater maintenance. Search by part type and tank compatibility, or describe the water heater and let ChatMRO match the part.
Browse →Water Jetters
Electric, gas and trailer-mounted water jetters for clearing drain, sewer and pipe blockages by high-pressure water flow, sized by PSI and GPM. Search by pipe diameter capability and power source, or describe the line you're clearing.
Browse →Water Level Controls
Mechanical float switches, electronic level probes and pump control panels for maintaining or signaling water level in tanks, sumps and boilers, sized by mounting style and voltage rating. Search by switch type and tank size, or describe the pump or alarm you need to control.
Browse →Water Level Monitoring Systems
Ultrasonic, float, submersible pressure and radar-based systems for continuous or point-level monitoring of water in tanks, sumps, reservoirs and wells. Search by sensing method, range and output signal, or describe the vessel and media you're monitoring.
Browse →Water Powered Pumps
Venturi-driven backup sump pumps and booster pumps that use municipal water pressure rather than electricity to move water, sized by drive-water inlet pressure and discharge flow rate. Search by pressure and flow, or describe the application and let ChatMRO match the pump.
Browse →Water Rescue Equipment
Throw bags, rescue PFDs, rescue boards, reach poles and swiftwater rescue kits for flood response, technical rescue teams and marine safety programs. Search by application, buoyancy rating or agency specification.
Browse →Waterfall Filters and Pond Skimmers
Waterfall biological filters and floating or box-style surface skimmers that clarify pond water and remove debris ahead of a waterfall or stream feature. Search by flow rate, pond size and filtration media, or describe the pond and let ChatMRO match the equipment.
Browse →Waxes and Cleaners
Industrial-grade waxes, polishes and cleaning chemicals for floor maintenance, equipment care and metal finishing. Search by surface type and formulation, or describe the cleaning task and let ChatMRO match the product.
Browse →Weld Cleaning Systems
Electrolytic weld cleaning and polishing systems that remove heat tint and restore corrosion resistance on stainless steel TIG and orbital welds without abrasive grinding. Search by output current and process type, or describe the weld finish you need to achieve.
Browse →Welding Aprons
Leather, FR cotton and split-cowhide welding aprons for spark, spatter and radiant heat protection, in bib and full-length coverage styles. Search by material, length or process type.
Browse →Welding Cable Connectors
Cam-lock, lug and quick-disconnect connectors for joining and terminating welding cable leads. Search by connector style, amperage rating and cable gauge, or describe the welder and cable size and let ChatMRO match the connector.
Browse →Welding Goggles
Shaded-lens goggles worn for gas welding, brazing, cutting and grinding, providing eye protection against sparks, glare and infrared/UV radiation. Search by lens shade number and welding process.
Browse →Welding Torch Handles
Replacement TIG torch bodies and oxy-fuel cutting/welding torch handles rated by amperage, cooling method and connection style. Search by process type, amperage rating and hose/cable connection, or describe your welder model and let ChatMRO match the torch handle.
Browse →Wet Mops
Cotton, rayon and microfiber wet mop heads in cut-end and loop-end styles, sized by head weight and mounting type for janitorial, food service and industrial floor cleaning. Search by fiber material and mount style, or describe your floor type and cleaning chemical.
Browse →Wheel Chock Accessories
Handles, chains, ropes and mounting holders for rubber and polyurethane wheel chocks, sized for commercial trucks, trailers and heavy equipment. Search by mounting type and chock size compatibility, or describe your fleet's chock storage needs.
Browse →Whole House Fans
Attic-mounted and ducted fans sized to pull cooler outside air through a home while exhausting hot attic and living-space air, sized to square footage by CFM airflow rating. Search by airflow capacity, mounting type and control system, or describe the home's square footage and let ChatMRO match the right fan.
Browse →Wildland Fire Hand Tools
Pulaskis, McLeods, fire rakes and combination fireline tools used by wildland firefighting crews to construct control lines and remove fuel ahead of a fire. Search by tool type and handle material, or describe the terrain and fuel type.
Browse →Wildland Gear Packs & Bags
Line gear packs, gear bags and fire shelter carriers built for wildland firefighting crews, with fire-resistant fabric and load-bearing frames for extended fireline deployments. Search by capacity or carry configuration and let ChatMRO match the pack.
Browse →Winch Cables
Steel wire rope and synthetic (UHMWPE) winch cables sized by diameter, length and breaking strength for recovery, towing and industrial winching applications. Search by cable type and winch capacity, or describe the winch and application and let ChatMRO match the cable.
Browse →Winch Remote Control Switches
Wired handheld and wireless RF remote control switches for electric winches, rated by control voltage, amperage and connector type, for off-road, industrial and marine applications. Search by winch brand compatibility or control type.
Browse →Wind Driven Turbine Ventilators
Wind-powered rotary roof ventilators that use passive wind energy to exhaust hot air and moisture from attics, warehouses and industrial roofs. Search by throat diameter, material and airflow rating, or describe the roof area and let ChatMRO match the ventilator.
Browse →Window Insulation Kits
Shrink-film, magnetic and foam-strip window insulation kits for sealing drafts and reducing heat loss through single and double-pane windows. Search by window size coverage, film type or interior/exterior application.
Browse →Window Locks and Hardware
Sash locks, cam latches, sliding window locks and related fasteners for residential and commercial window units. Search by window type, lock mechanism and finish.
Browse →Wire Connector Kits
Assorted twist-on wire nut, crimp and heat-shrink connector kits covering common wire gauge ranges for electrical splicing, termination and repair. Search by connector type, gauge range and kit size, or describe the wiring job and let ChatMRO match the kit.
Browse →Wire Feeders
Standalone and integrated MIG wire feed drive units controlling wire speed and delivery to the welding gun across steel, stainless and aluminum welding wire. Search by feed speed range, drive roll type and voltage class, or describe your welding process and let ChatMRO match the feeder.
Browse →Wire Marking Labels
Heat-shrink sleeve, self-laminating and wrap-around wire markers sized to specific wire gauge ranges for panel wiring, cable and conductor identification. Search by label type and wire gauge, or describe your labeling application and let ChatMRO match the product.
Browse →Wire Mesh Slings
Woven stainless and carbon steel wire mesh slings for rigging loads with sharp edges, high heat, or abrasive surfaces that would damage synthetic or chain slings. Search by width, working load limit and fitting type, or describe the load and environment and let ChatMRO match the sling.
Browse →Wire Shelves
Open-wire shelving for storage, kitchen and warehouse applications where ventilation, visibility and light weight are preferred over solid shelving. Search by shelf dimensions, load capacity and finish, or describe the storage application and let ChatMRO match the shelf.
Browse →Wire Spool Carts
Mobile dispensing carts holding one or multiple wire and cable spools on a rotating spindle axle, for controlled feed during wiring and cabling work. Search by spool capacity and spindle diameter, or describe the reel size and let ChatMRO match the cart.
Browse →Wire Twist Pliers
Manual and pneumatic twisting pliers for tying rebar, fencing and lashing wire, sized to specific wire gauge ranges and jaw configurations. Search by wire gauge capacity, jaw style and handle length, or describe the tying application and let ChatMRO match the right tool.
Browse →Wired Intercom Systems
Hardwired audio and video intercom systems for entry control, facility paging and secure communication, in single-line and multi-station bus configurations. Search by station type and building size, or describe the facility you're wiring.
Browse →Wireless Push Buttons
Battery-free and battery-powered RF push buttons for machine start/stop, call signaling and remote control, in panel-mount and pendant formats with IP65/IP67 ratings. Search by frequency band, contact configuration or receiver type.
Browse →Wiring Combination Devices
Combination wiring devices that pair two functions — switch and receptacle, dual switches, or switch and pilot light — into a single device yoke for single-gang installation. Search by combination type, amperage and NEMA configuration, or describe the circuit you're wiring.
Browse →Wood Drilling Bit Sets
Brad point, spade, Forstner and auger bit sets for drilling clean, accurate holes in wood, sized as complete assortments for cabinetry and general woodworking. Search by bit style and size range, or describe the hole size and finish requirement and let ChatMRO match the set.
Browse →Wood Drilling Bits
Twist, spade, Forstner, auger and brad-point bits for drilling wood, from framing lumber to fine cabinetry, in fractional and metric diameters. Search by bit type, hole diameter or shank style.
Browse →Work Coveralls
One-piece protective coveralls in flame-resistant, disposable and poly-cotton fabrics, covering general workwear through NFPA 2112 arc-rated and chemical splash protection. Search by fabric and protection class, or describe the hazard and let ChatMRO match the coverall.
Browse →Work Platforms
Rolling, fixed-height and podium-style work platforms providing safe elevated access for maintenance, assembly and stocking tasks, rated by platform height and load capacity. Search by height and mobility type, or describe the access task and let ChatMRO match the platform.
Browse →Work Tables
Stainless steel, laminate and butcher block work tables sized by top dimensions and load rating, for assembly, packing, food prep and general shop use. Search by top material and size, or describe the load and environment the table needs to handle.
Browse →Worm Gear Clamps
Stainless steel and zinc-plated worm gear (screw) hose clamps in standard SAE sizes, for automotive, marine, plumbing and industrial hose clamping. Search by clamping diameter range and band material, or describe the hose you're securing.
Browse →Wrist Supports and Wraps
Ergonomic wrist braces, elastic compression wraps and weightlifting-style wrist wraps that stabilize the joint and reduce repetitive-strain risk during manual and industrial tasks. Search by support level and application, or describe the task and let ChatMRO match the wrap.
Browse →Yoke Ends
Threaded and weld-on clevis-style yoke ends connecting hydraulic and pneumatic cylinder rods to pivoting linkages and actuators. Search by thread size, pin bore diameter and mounting style, or describe the cylinder rod and let ChatMRO match the yoke.
Browse →
ChatMRO
Find the right industrial part, just by asking
Email us at [email protected] or call +1 910 713 1311
Browse by category
30M+ parts, one category away from the exact match.
No endless scrolling, no wrong-brand results — these categories are how we turn a massive catalog into a one-click search.