Technical Foundation
What Is a Pipe and Tube Clamp?
Pipe and tube clamps mechanically secure round pipe, tubing or conduit to a structural surface, sized to the nominal outside diameter of the pipe or tube being clamped — not the clamp's own overall dimensions. Cushioned clamps include a rubber, EPDM or similar liner inside the clamp band that isolates the pipe from direct metal-to-metal contact, reducing vibration transfer, preventing abrasion of the pipe's surface finish or coating, and providing some electrical isolation where galvanic corrosion between dissimilar metals is a concern.
Standard uncushioned clamps are lower cost and appropriate where vibration isolation isn't needed and the pipe's surface coating or corrosion resistance can tolerate direct clamp contact. Heavy-duty two-piece clamps split into separate halves that bolt together around the pipe, making installation and later removal easier on completed runs compared to a one-piece clamp that must be threaded onto the pipe end before installation.
Prefer a quick quote?
Get Pipe and Tube Clamps Pricing in Your Inbox
Skip the search — tell us the pipe/tube diameter, material and whether cushioned lining is needed and we will come back with pricing.
| Spec | What It Means | Why It Matters |
|---|---|---|
| Pipe/Tube Diameter | Sized to nominal pipe or tube OD | Clamp must match the actual OD, not the pipe's nominal size designation, which can differ by schedule |
| Cushioning | Cushioned (rubber/EPDM lined) vs. standard | Cushioning reduces vibration transfer and protects pipe coating/finish from abrasion |
| Clamp Material | Steel, stainless steel, galvanized | Determines corrosion resistance appropriate to the installation environment |
| Construction | One-piece vs. two-piece (split) design | Two-piece clamps install and remove without threading over a pipe end |
| Mounting Style | Base mount, beam clamp, weld-on | Determines how the clamp itself attaches to the supporting structure |
Shop Pipe and Tube Clamps
Browse Pipe and Tube Clamps Sub-Categories
Organised by cushioning and duty class. Pick a sub-category, or describe the pipe diameter and mounting surface and let ChatMRO match the clamp.
How it works
From Half-Remembered Part Number to PO, in Three Steps.
Ask
Type an MPN, paste a spec sheet, or describe the part in plain English. ChatMRO understands engineer-speak.
Compare
Side-by-side specs, cross-references, and equivalents from multiple sources — without the clutter of endless browser tabs.
Quote & Buy
Request a quote or add to cart. Volume discounts, VAT-aware pricing, and consolidated procurement — all in one place.
Applications
Where Pipe and Tube Clamps Get Used
Pipe and tube clamps are specified anywhere round pipe, tube or conduit needs to be mechanically secured to a structure or frame.
HVAC Piping & Ductwork Support
Cushioned clamps supporting refrigerant and chilled water piping, reducing vibration transfer to the building structure.
Hydraulic & Pneumatic Line Routing
Tube clamps securing hydraulic and pneumatic lines on mobile and industrial equipment against vibration and chafe.
Electrical Conduit Installation
Conduit clamps securing rigid and EMT conduit runs to structural framing per electrical code support spacing requirements.
Plumbing System Support
Pipe clamps securing water supply and drain piping runs to framing and structural elements throughout a building.
Process Piping in Industrial Facilities
Standard and cushioned clamps supporting process piping runs across manufacturing and processing facilities.
Mobile Equipment & Vehicle Fabrication
Vibration-isolating cushioned clamps securing fluid lines and tubing on trucks, trailers and mobile equipment.
FAQ
Pipe and Tube Clamps Questions, Answered
When do I need a cushioned clamp instead of a standard clamp?
Cushioned clamps are needed wherever vibration isolation matters (to reduce noise transfer and prevent fatigue at the clamp point), where the pipe has a coating or finish that direct metal contact would abrade, or where dissimilar metals in contact could create galvanic corrosion. Standard uncushioned clamps are adequate and more economical for static, non-vibrating runs where the pipe material tolerates direct contact.
How do I make sure I order the right size clamp for my pipe?
Clamps are sized to the pipe or tube's actual outside diameter, which for pipe can differ from its nominal size designation depending on schedule/wall thickness — measure the actual OD of the pipe or tube being clamped rather than relying on the nominal size label, especially when working with heavier-schedule pipe.
What's the benefit of a two-piece clamp over a one-piece clamp?
A two-piece (split) clamp bolts together around the pipe after the pipe is already in position, so it can be installed or removed on a completed pipe run without disconnecting or threading the clamp over a pipe end. A one-piece clamp is typically installed by sliding it onto the pipe before final connections are made, which is fine for new installations but inconvenient for retrofitting an existing run.
Do pipe clamps need to be spaced at specific intervals?
Yes for most code-governed installations (plumbing, electrical conduit, fire protection) — support spacing requirements are set by the applicable code (plumbing code, NEC for conduit, etc.) based on pipe/conduit size and material, and are meant to prevent excessive sagging and stress at joints. Always check the governing code's spacing table rather than spacing clamps arbitrarily.
Can the same clamp be used on both metal and plastic pipe?
A clamp sized to the correct OD can physically fit either, but plastic pipe is generally softer and more prone to being over-compressed or damaged by a tightly torqued clamp than metal pipe, so cushioned clamps and controlled torque are more often recommended for plastic pipe to avoid crushing or creating a stress point that could crack the pipe over time.
Keep browsing
Related Categories
Explore More
Find Your Next Part Now.
Describe a part number, spec or what it does.