Technical Foundation
What Is a Sound Level Meter Accessorie?
Sound level meter accessories support accurate, repeatable acoustic measurement and are chosen around the specific meter and measurement standard in use rather than as generic add-ons. An acoustic calibrator generates a precise, known sound pressure level (commonly 94 dB and/or 114 dB at a reference frequency) into the meter's microphone before and after a measurement session, verifying the meter reads correctly — a step required by most occupational and environmental noise measurement standards, not an optional convenience.
A foam windscreen fits over the microphone to reduce wind-induced noise artifacts during outdoor measurement, sized to the specific microphone diameter (commonly 1/2 in or 1/4 in) rather than universal. Tripods and extension cables position the microphone at a standardized measurement height and distance from the operator's body, since the operator's own presence can reflect sound and skew readings taken too close to the body.
Prefer a quick quote?
Get Sound Level Meter Accessories Pricing in Your Inbox
Skip the search — tell us the accessory type and the sound level meter model it needs to fit and we will come back with pricing.
| Spec | What It Means | Why It Matters |
|---|---|---|
| Calibrator Output Level | Commonly 94 dB and/or 114 dB at 1kHz reference | Must match the reference level(s) supported by the specific meter being calibrated |
| Microphone Diameter | 1/2 in or 1/4 in standard | Windscreens and accessories must match the exact microphone diameter of the meter |
| Calibration Traceability | Traceable to national/international standards (e.g., ANSI, IEC) | Required for measurements used in regulatory compliance or legal noise dispute documentation |
| Cable Length | Extension cables commonly 3m-10m+ | Longer cables allow the microphone to be positioned away from the operator to avoid body-reflection error |
| Windscreen Material | Open-cell acoustic foam | Reduces wind noise artifacts with minimal attenuation of the actual sound being measured |
Shop Sound Level Meter Accessories
Browse Sound Level Meter Accessories Sub-Categories
Organised by accessory function. Pick a sub-category, or specify the meter model you're supporting and let ChatMRO match the accessory.
How it works
From Half-Remembered Part Number to PO, in Three Steps.
Ask
Type an MPN, paste a spec sheet, or describe the part in plain English. ChatMRO understands engineer-speak.
Compare
Side-by-side specs, cross-references, and equivalents from multiple sources — without the clutter of endless browser tabs.
Quote & Buy
Request a quote or add to cart. Volume discounts, VAT-aware pricing, and consolidated procurement — all in one place.
Applications
Where Sound Level Meter Accessories Get Used
Sound level meter accessories are specified anywhere acoustic measurements need to be accurate, repeatable, and defensible against a regulatory or contractual noise standard.
Occupational Noise Monitoring
Verifying sound level meter accuracy before and after workplace noise exposure surveys required by safety regulations.
Environmental Noise Assessment
Outdoor noise measurement for environmental compliance, using windscreens to control wind-induced measurement error.
Product Noise Testing
Calibrating and mounting sound level meters for consistent, repeatable noise emission testing of equipment and products.
Construction Site Noise Compliance
Field noise measurement for construction noise ordinance compliance, requiring calibration verification for defensible records.
HVAC & Industrial Equipment Testing
Measuring equipment noise output during commissioning and troubleshooting using calibrated meters.
Acoustic Consulting & Research
Supporting field and lab acoustic measurement work requiring calibration traceability and precise microphone positioning.
FAQ
Sound Level Meter Accessories Questions, Answered
Why do I need an acoustic calibrator if my sound level meter is already factory calibrated?
Factory calibration establishes the meter's baseline accuracy at time of manufacture, but microphone sensitivity can drift over time and with handling. An acoustic calibrator lets you verify the meter reads correctly immediately before and after each measurement session, which most occupational and environmental noise standards require as documented proof the readings are valid.
What's the difference between a 94 dB and 114 dB calibrator?
These refer to the reference sound pressure level the calibrator generates into the microphone — 94 dB is the more common single-point calibration reference, while some calibrators offer both 94 dB and 114 dB to verify accuracy across a wider measurement range. Use the reference level(s) your specific meter and measurement protocol call for.
Do windscreens change the sound level reading?
A properly sized acoustic foam windscreen is designed to minimally attenuate the actual sound being measured while significantly reducing wind-induced noise artifacts, so its effect on the true reading is accounted for in most measurement protocols. It should still be matched to the meter's specific microphone diameter for correct fit and minimal impact.
Why would I need a microphone extension cable and tripod instead of just holding the meter?
The operator's own body can reflect sound waves and skew a reading taken too close to it, and many measurement standards specify a minimum distance between the operator and the microphone. A tripod with an extension cable lets the microphone be positioned at the correct height and distance from the operator while the meter's display remains accessible.
What does 'calibration traceability' mean and when do I need it?
Traceability means the calibrator's own output level has been verified against a chain of reference standards (e.g., to ANSI or IEC standards) with documentation. It matters when noise measurements will be used for regulatory compliance reporting or could become part of a legal dispute, where the measurement's defensibility depends on demonstrable calibration traceability.
Keep browsing
Related Categories
Explore More
Find Your Next Part Now.
Describe a part number, spec or what it does.