Technical Foundation
What Is a Class CC Fuse?
A Class CC fuse is a UL-classified branch-circuit fuse in a compact, standardized 13/32 x 1-1/2 inch cartridge body, rated up to 600V AC and 30A, distinguished by a rejection feature (a small pin or ring in the fuse holder) that physically prevents a non-current-limiting fuse from being installed in a Class CC-rated fuseholder. This rejection design ensures only fuses with Class CC's current-limiting characteristic — critical for protecting downstream components from short-circuit let-through energy — can be used in circuits engineered around that protection level.
Class CC fuses come in fast-acting and time-delay versions: fast-acting fuses open quickly on any overcurrent, suited to protecting sensitive electronic and control circuits, while time-delay fuses tolerate brief inrush currents (such as a motor's starting current or a transformer's magnetizing inrush) without nuisance opening, while still opening quickly on a true short circuit or sustained overload. Class CC's small physical size and high interrupting rating (typically 200,000A) make it a common choice for motor control centers and control panels where space is limited but short-circuit protection must still be robust.
Prefer a quick quote?
Get Class CC Fuses Pricing in Your Inbox
Skip the search — tell us the amp rating, voltage rating and time-delay type and we will come back with pricing.
| Spec | What It Means | Why It Matters |
|---|---|---|
| Amp Rating | 1/10A to 30A | Sized to the load's full-load current with appropriate margin per NEC branch circuit rules |
| Voltage Rating | 600V AC / 300V DC typical | Must meet or exceed the circuit's actual system voltage |
| Time-Delay vs. Fast-Acting | Time-delay tolerates inrush; fast-acting opens immediately | Time-delay suits motor and transformer circuits; fast-acting suits control and electronic circuit protection |
| Interrupting Rating (AIC) | Typically 200,000A | Must exceed the available fault current at the point of installation |
| Rejection Feature | Physical pin/ring prevents non-CC fuse installation | Ensures only correctly current-limiting fuses can be installed in a Class CC-rated holder |
Shop Class CC Fuses
Browse Class CC Fuses Sub-Categories
Organised by response type. Pick a sub-category, or describe the circuit and load and let ChatMRO match the fuse.
How it works
From Half-Remembered Part Number to PO, in Three Steps.
Ask
Type an MPN, paste a spec sheet, or describe the part in plain English. ChatMRO understands engineer-speak.
Compare
Side-by-side specs, cross-references, and equivalents from multiple sources — without the clutter of endless browser tabs.
Quote & Buy
Request a quote or add to cart. Volume discounts, VAT-aware pricing, and consolidated procurement — all in one place.
Applications
Where Class CC Fuses Get Used
Class CC fuses are specified anywhere compact, current-limiting branch circuit or control circuit protection is required in a rejection-style fuseholder.
Motor Control Centers
Branch circuit and control transformer protection in compact MCC bucket layouts where physical space is limited.
Industrial Control Panels
Protecting individual control circuits, PLC power supplies and instrumentation within a panel using a compact fuse footprint.
HVAC Equipment Control Circuits
Fast-acting protection for low-current control transformers and electronic control boards in packaged HVAC units.
Lighting & Branch Circuit Protection
Time-delay Class CC fuses protecting branch circuits with moderate inrush from ballasts or transformers.
Machine Tool Electrical Cabinets
Compact, coordinated fuse protection for individual sub-circuits within a machine's main electrical enclosure.
Solar & Battery Combiner Boxes
DC-rated Class CC fuses protecting individual strings or circuits in renewable energy combiner applications.
FAQ
Class CC Fuses Questions, Answered
What does the rejection feature on a Class CC fuse holder do?
A Class CC fuseholder has a small physical pin or ring molded into it that only allows a genuine Class CC fuse's body shape to seat fully — a standard non-rejection fuse of similar physical size simply won't fit or make proper contact. This prevents someone from substituting a non-current-limiting fuse into a circuit that was engineered around Class CC's specific current-limiting, high-interrupting-rating performance.
Should I use a fast-acting or time-delay Class CC fuse?
Time-delay fuses are the right choice for circuits with predictable inrush current, like motor starting or transformer magnetizing current, because they ride through that brief surge without nuisance opening while still protecting against sustained overloads and short circuits. Fast-acting fuses are better suited to protecting sensitive electronic circuits, control transformers, or any load without significant startup inrush, where you want the fastest possible response to any overcurrent.
What size Class CC fuse do I need for my circuit?
Sizing depends on the load's full-load current and the applicable branch circuit protection rules (in the US, per NEC Article 430 for motors and similar sections for other loads) — for motor circuits, time-delay fuses are commonly sized around 125-175% of motor full-load current, but the exact multiplier depends on motor type and starting characteristics. Always confirm sizing against the specific equipment's nameplate and applicable code rather than a generic rule of thumb.
Can I use a Class J or Class RK5 fuse in a Class CC fuseholder?
No — Class CC fuseholders have a rejection feature specifically sized to the Class CC body dimensions (13/32 x 1-1/2 inch), and other fuse classes have different physical dimensions that won't seat properly or make reliable contact. Fuse class, body size, and holder must all match; they are not interchangeable across classes even at the same amp rating.
What interrupting rating do Class CC fuses have?
Most Class CC fuses carry a 200,000A interrupting rating (AIC), which must equal or exceed the available fault current at the point of installation — this is typically verified through a short-circuit study for the panel or circuit in question. Using a fuse with an interrupting rating below the available fault current is a serious safety hazard and a code violation.
Keep browsing
Related Categories
Explore More
Find Your Next Part Now.
Describe a part number, spec or what it does.