Technical Foundation
What Is a Drum Cones and Collar?
A drum cone is a domed or sloped top fitted with standard bung openings (commonly a 2 in. and a 3/4 in. NPT-threaded fitting) that converts an open-top drum into a closed-head-style container with controlled access points, or replaces a damaged original drum top. A neck collar (or chime ring) reinforces or repairs the rolled rim of a drum where the lid or cone seats, restoring the sealing surface geometry needed for a proper gasket seal — critical for maintaining a drum's liquid- or vapor-tight rating after rim damage from handling or corrosion.
Material selection must account for chemical compatibility with the drum's contents: steel cones suit petroleum products and many industrial chemicals but can corrode with aggressive acids or caustics, while polyethylene cones resist a broader range of corrosive chemicals but have lower structural rigidity and lower temperature limits than steel. Bung thread size and count must match both the cone/collar and the fittings (faucets, vents, pumps) intended to be installed in them.
Prefer a quick quote?
Get Drum Cones and Collars Pricing in Your Inbox
Skip the search — tell us the drum size, material and bung/opening configuration and we will come back with pricing.
| Spec | What It Means | Why It Matters |
|---|---|---|
| Material | Steel (with liner options) vs. high-density polyethylene | Determines chemical compatibility with drum contents and structural/temperature limits |
| Drum Size Fit | Standard 55-gal drum diameter (most common); other sizes available | Cone/collar must match the specific drum's rim diameter to seat and seal properly |
| Bung Configuration | 2 in. and 3/4 in. NPT common; single or dual bung | Must match the pumps, faucets, or vents intended to be installed in the openings |
| Gasket Material | Compatible with drum contents (e.g., Buna-N, EPDM, Viton) | Gasket material must resist the specific chemical stored or it will degrade and leak |
| Rim/Chime Condition | New collar restores damaged or corroded rim geometry | A damaged rim won't hold a proper seal even with a new gasket unless the collar restores true geometry |
Shop Drum Cones and Collars
Browse Drum Cones and Collars Sub-Categories
Organised by material and function. Pick a sub-category, or describe the drum you're converting or repairing and let ChatMRO match the part.
How it works
From Half-Remembered Part Number to PO, in Three Steps.
Ask
Type an MPN, paste a spec sheet, or describe the part in plain English. ChatMRO understands engineer-speak.
Compare
Side-by-side specs, cross-references, and equivalents from multiple sources — without the clutter of endless browser tabs.
Quote & Buy
Request a quote or add to cart. Volume discounts, VAT-aware pricing, and consolidated procurement — all in one place.
Applications
Where Drum Cones and Collars Get Used
Drum cones and collars are specified anywhere a drum needs a controlled bunged opening or a damaged rim needs restoring to maintain a proper seal.
Chemical Processing & Storage
Steel and poly drum cones used to convert open-head drums to bunged, controlled-access containers for liquid chemical storage.
Petroleum & Lubricant Distribution
Steel drum cones fitted with faucet and vent bungs for dispensing oil and lubricant products from 55-gallon drums.
Waste Management & Drum Reconditioning
Neck collars used to repair damaged drum rims as part of drum reconditioning and reuse programs.
Agricultural Chemical Handling
Poly drum cones specified for corrosive agricultural chemical storage where steel would corrode over time.
Manufacturing & Industrial Processing
Drum cones and collars used to standardize drum configurations across a facility's chemical and process fluid inventory.
Environmental Remediation Services
Replacement collars and cones used to maintain drum integrity for regulated waste storage and transport.
FAQ
Drum Cones and Collars Questions, Answered
What's the difference between a drum cone and a drum collar?
A drum cone is a full replacement top piece, typically domed, that fits over an open-head drum and includes bung openings for controlled access — it effectively converts the drum's top configuration. A neck collar (or chime ring) instead reinforces or repairs the existing rolled rim of a drum where a lid or cone seats, restoring the sealing geometry without replacing the whole top. Use a cone to change drum configuration, a collar to repair rim damage.
Should I choose a steel or poly drum cone for chemical storage?
Match the cone material to chemical compatibility with the drum's actual contents: steel handles petroleum products and many industrial chemicals well but can corrode with aggressive acids or caustics, while polyethylene resists a broader range of corrosive chemicals but has lower structural rigidity and lower maximum operating temperature than steel. Check a chemical compatibility chart for the specific substance being stored before choosing.
Why would a drum need a neck collar repair instead of just being replaced?
If the drum body itself is structurally sound and only the rim (chime) is damaged, dented, or corroded from repeated handling, a collar repair restores the sealing surface at a fraction of the cost of a full drum replacement. This is common practice in drum reconditioning operations that refurbish steel drums for reuse rather than sending a serviceable drum to scrap over rim damage alone.
What bung configuration do I need on a drum cone?
Most steel drum tops use a standard combination of one 2 in. NPT bung (for a pump or larger fitting) and one 3/4 in. NPT bung (for a vent or smaller fitting), but confirm this matches the specific pump, faucet, or vent fitting you intend to install. Some applications need dual large bungs or different thread configurations, so check compatibility before ordering.
How do I make sure a drum cone or collar actually seals properly once installed?
A proper seal depends on three things working together: a rim/chime with true, undamaged geometry, a gasket material chemically compatible with the drum's contents, and a properly torqued locking ring or bolted flange holding the cone/collar to the drum body. Skipping any one of these — for example using an incompatible gasket material even with a perfect rim — will still result in a leak over time.
Keep browsing
Related Categories
Find Your Next Part Now.
Describe a part number, spec or what it does.