Technical Foundation
What Is a Clamps and Fastener?
This category covers band, screw and structural clamps used to secure hose to a barbed or shouldered fitting, mount pipe and conduit runs to structure, or retain cable and tubing — distinct from threaded fasteners in that they apply radial clamping force around a round or near-round object rather than joining two flat faces. Worm gear hose clamps are the most common type: a slotted stainless or plated steel band tightened by a screw engaging the slots, sized by an adjustable diameter range rather than a single fixed size.
T-bolt clamps use a solid, non-slotted band and a T-bolt fastener for higher, more even clamping force with less tendency to cut into soft silicone hose under vibration, common on turbo and intercooler hose connections. Pipe and conduit clamps mount rigid runs to structure at fixed intervals, often with a cushioned liner to prevent abrasion and electrical bonding issues; cable clamps perform a similar function for smaller-diameter cable and tubing bundles.
Prefer a quick quote?
Get Clamps and Fasteners Pricing in Your Inbox
Skip the search — tell us the clamp type, diameter range and material and we will come back with pricing.
| Spec | What It Means | Why It Matters |
|---|---|---|
| Clamp Type | Worm gear, T-bolt, spring, pipe/conduit, cable | Each type suits a different combination of pressure, vibration and hose/pipe material |
| Diameter Range | Adjustable min-max range per clamp size | Select a clamp whose range centers on your actual diameter, not just barely covers it |
| Band Material | 300-series stainless, zinc-plated steel | Stainless resists corrosion in wet, outdoor or washdown environments; plated steel suits dry indoor use |
| Band Width | Narrow to wide, application-specific | Wider bands distribute clamping force over more hose surface, reducing local crushing |
| Torque Rating / Housing | Screw housing type affects max tightening torque | Determines how much clamping force can be applied before the screw mechanism strips or slips |
Shop Clamps and Fasteners
Browse Clamps and Fasteners Sub-Categories
Organised by clamp mechanism. Pick a sub-category, or describe the diameter and material you're clamping and let ChatMRO match the clamp.
How it works
From Half-Remembered Part Number to PO, in Three Steps.
Ask
Type an MPN, paste a spec sheet, or describe the part in plain English. ChatMRO understands engineer-speak.
Compare
Side-by-side specs, cross-references, and equivalents from multiple sources — without the clutter of endless browser tabs.
Quote & Buy
Request a quote or add to cart. Volume discounts, VAT-aware pricing, and consolidated procurement — all in one place.
Applications
Where Clamps and Fasteners Get Used
Clamps in this category are specified anywhere hose, pipe, conduit or cable needs to be secured to a fitting or to structure.
Automotive & Turbo Systems
T-bolt and worm gear clamps secure intercooler, turbo and coolant hose connections under pressure and vibration.
Industrial Piping & Ductwork
Pipe and conduit clamps mount rigid runs to structural steel and walls at code-required intervals.
Marine Applications
Stainless worm gear and T-bolt clamps secure below-waterline and engine bay hose connections resisting saltwater corrosion.
HVAC & Refrigeration Systems
Hose and pipe clamps secure flexible ductwork connections and refrigerant line runs to structure.
Agricultural & Off-Road Equipment
Heavy-duty worm gear clamps secure hydraulic and coolant hose on equipment subject to vibration and flexing.
Electrical & Cable Management
Cable clamps route and secure conduit and cable bundles to structure in commercial and industrial installations.
FAQ
Clamps and Fasteners Questions, Answered
What's the difference between a worm gear clamp and a T-bolt clamp?
A worm gear clamp uses a slotted band and screw mechanism, is widely available and inexpensive, but the slots can create pressure points that dig into soft hose material over time. A T-bolt clamp uses a solid, unslotted band with a T-bolt fastener, distributing clamping force more evenly and holding torque more consistently under vibration — the standard choice for turbo, intercooler and other high-pressure or high-vibration hose connections.
How do I choose the right diameter range for a hose clamp?
Pick a clamp whose adjustable range has your target diameter roughly in the middle, not at either extreme — a clamp maxed out at its smallest or largest setting has less remaining band travel to compensate for hose swelling, fitting tolerance, or repeated tightening over its service life.
Should I use stainless or zinc-plated clamps?
Stainless steel (300-series) resists corrosion in wet, outdoor, marine or washdown environments and won't stain the surrounding material with rust; zinc-plated steel is adequate and more economical for dry, indoor, non-corrosive applications, but will corrode faster if exposed to moisture.
How tight should I torque a hose clamp?
Follow the hose and fitting manufacturer's torque spec where available — over-tightening cuts into or crushes the hose material (especially silicone) and can permanently damage it, while under-tightening risks leaks or the hose working loose under pressure or vibration. For clamps without a stated torque, tighten until snug plus a small additional turn, checking for even compression around the circumference.
What's the benefit of a cushioned pipe/conduit clamp?
A cushioned liner between the clamp and the pipe or conduit prevents metal-to-metal abrasion that could wear through the pipe wall or damage conduit insulation over time from vibration, and on electrical conduit it can also help avoid unintended electrical bonding paths between the clamp and the conduit.
Keep browsing
Related Categories
Explore More
Find Your Next Part Now.
Describe a part number, spec or what it does.