Browse by category

Lighting

LED high bays and troffers, floodlights and area lighting, lamps and retrofit tubes, emergency and exit fixtures, hazardous area lighting and portable task lights. Search by lumen output and mounting height, by colour temperature, or by the fixture you are replacing.

  • 30M+ parts indexed
  • Procure in < 60 seconds
  • No credit card required

Searchable by Spec

Indexed on full specifications rather than titles alone, so a spec can be searched directly.

Backed by Raptor Supplies

The same suppliers, pricing desk and people standing behind every quote.

US & Worldwide

Serving the US, with fulfilment across the UK, EU, Singapore and Australia.

Technical Foundation

What Is Lighting?

Lighting is bought on wattage out of habit and specified on lumens in practice. Since LED replaced discharge sources, the wattage of the old fixture tells you almost nothing about what will replace it, while mounting height, beam angle and required lux at the work surface tell you everything.

ChatMRO indexes lighting with lumen output, efficacy, colour temperature, colour rendering, beam angle, dimming protocol, ingress rating and hazardous area classification held as attributes. "4 foot LED high bay, 5000 K, 0-10 V dimmable, IP65" is therefore a complete specification rather than a wattage guess. Colour rendering index is often overlooked but decides whether a warehouse fixture is adequate for a quality-inspection area right next to it.

Hazardous area lighting is a separate discipline within the category. Class and division or zone classification, temperature class and enclosure construction are indexed explicitly, because a fixture that is merely weatherproof is not a substitute for one that is certified for a flammable atmosphere.

Prefer a quick quote?

Get Lighting Pricing in Your Inbox

Skip the search — tell us the lumen output, colour temperature and IP rating and we'll come back with pricing.

SpecWhat It MeansWhy It Matters
Lumen OutputThe total light output of the fixtureThe real basis for replacement, not the wattage of the fixture being replaced
EfficacyLumens produced per watt consumedDetermines running cost and heat output for the same light level
Colour TemperatureThe warmth or coolness of the light, in KelvinMismatched colour temperature across one space reads as an obvious, cheap-looking fix
Beam AngleHow tightly or widely the fixture distributes lightWrong beam angle creates hot spots and dark gaps regardless of total lumen output
Ingress ProtectionThe IP rating for dust and moisture resistanceRequired for wet, dusty or outdoor locations — a standard fixture will fail early there

Shop Lighting

Browse Lighting Sub-Categories

Organised the way a maintenance store is. Pick a sub-category, or skip it entirely and just describe the part you need.

How it works

From Half-Remembered Part Number to PO, in Three Steps.

01

Ask

Type an MPN, paste a spec sheet, or describe the part in plain English. ChatMRO understands engineer-speak.

02

Compare

Side-by-side specs, cross-references, and equivalents from multiple sources — without the clutter of endless browser tabs.

03

Quote & Buy

Request a quote or add to cart. Volume discounts, VAT-aware pricing, and consolidated procurement — all in one place.

Applications

Where Lighting Get Used

The same component behaves differently by sector, because the duty cycle, the environment and the paperwork all change.

Warehousing & distribution

High mounting heights, narrow aisles and long operating hours, which favours high-bay fixtures with aisle-appropriate beam distribution rather than wide symmetric optics.

Manufacturing & assembly

Higher illuminance targets and tighter uniformity than storage space, with glare control mattering wherever operators look upward or work with polished surfaces.

Food processing & cold storage

Washdown areas need enclosures rated against high-pressure jetting specifically, plus shatter containment over open product lines.

Oil, gas & chemical plant

Classified areas require fixtures certified for the class and division or zone, matched to the gas group and temperature class of the substance present.

Workshops & maintenance bays

Neutral to cool colour temperature with high colour rendering, because fault-finding on wiring and finish inspection both depend on colour discrimination.

Car parks, yards & external areas

Area and street optics designed to put light on the surface rather than into the sky or neighbouring property, with attention to light trespass and uplight.

Offices & commercial interiors

Recessed troffers and panels selected on glare control as much as output, because most of the task is screen-based.

Egress routes & life safety

Emergency luminaires and exit signage specified on battery duration, coverage of the escape path and testing regime.

Brands

Lighting Brands in the Catalogue

Cross-reference freely between them — ask for an equivalent and ChatMRO shows what matches and what differs.

FAQ

Lighting Questions, Answered

How do I replace a metal halide fixture with LED?

Do not match wattage. Give ChatMRO the existing fixture, the mounting height and the area covered, and it recommends an LED fixture on lumen output and beam angle.

Do you supply hazardous area lighting?

Yes, indexed by class, division or zone and temperature class. Describe the classified area and ChatMRO filters to certified fixtures.

Which colour temperature should I choose?

4000 K is the usual neutral choice for general industrial space; 5000 K and above suits inspection and detail work. Describe the task and ChatMRO recommends.

Are your LED tubes ballast bypass or plug and play?

Both types are indexed as distinct products, because they are wired differently. Tell ChatMRO whether the ballast is being removed and it returns the correct type.

Can you quote a full retrofit?

Yes. List the fixture counts by area in one RFQ and the procurement desk will quote the project, including controls and emergency fittings.

Keep browsing

Related Categories

Find Your Next Part Now.

Describe a part number, spec or what it does.