The fastest way to find, compare and buy Speedaire stationary air tanks.
Describe the tank capacity, orientation, or compressor setup you have. ChatMRO finds the exact Speedaire match, shows alternatives, and gives you a quote — in seconds. No part number needed.
Updated
AI-generated imageA stationary air tank (also called an air receiver) is an ASME-rated steel pressure vessel installed between an air compressor and its distribution piping to store compressed air, smooth out pressure pulsations, reduce compressor cycling frequency, and allow moisture to condense out before air reaches downstream equipment. Speedaire's stationary tanks are built and stamped to ASME Section VIII standards specifically for use as air receivers, rated for a maximum working pressure of 200 psi.
Facilities engineers, compressed air system designers, and maintenance teams rely on stationary air tanks wherever a compressor needs a buffer volume to handle peak demand without excessive on/off cycling — nearly every fixed shop, plant, or facility compressed air system includes one sized to the compressor's output and the site's air consumption pattern. Their ASME Section VIII stamped construction, code-required safety documentation, and available vertical or horizontal orientations to fit different floor space constraints make them a standard, code-compliant component of virtually all stationary compressed air installations.
Common configuration: 30 to 240 gallon capacity, vertical or horizontal tank orientation, welded carbon steel construction, ASME U Stamp certification (some larger tanks also carry UM Stamp), and a 200 psi maximum operating pressure rating. NPT threaded ports accommodate inlet, outlet, drain, safety valve, and gauge connections.
Stop second-guessing. Match your use case below — then let ChatMRO's AI surface the exact tank size, dimension data, and alternatives in one natural-language search.
Compact footprint requirements with a single small-to-mid HP compressor. 30–60 gallon vertical tanks dominate here.
Daily commercial compressed air use with moderate demand fluctuation. 80–120 gallon tanks dominate here.
Facilities with larger compressors, high or variable air consumption, or multiple downstream branch lines.
Speedaire (Grainger's private-label pneumatic and fluid handling brand) offers a full range of ASME-rated 200 psi stationary air tanks across common shop and industrial capacities. Here's how to navigate their lineup without a 40-tab browser session.
ChatMRO indexes the full Speedaire air tank catalogue. Search any product by description, application, or rough spec.
The small-shop workhorse. 30 gal capacity, vertical orientation, 16 in. diameter, 40.5 in. overall height. ASME U Code certified steel construction, NPT ports for inlet/outlet/drain/accessories.
Search 1TZZ6 Series →60–80 gal capacity available in either vertical or horizontal orientation to fit different floor plans. ASME U Stamp and UM Stamp certified, rated to support compressors up to roughly 5 HP.
Search 1YAC4/5Z360 Series →Maximum-capacity option at 240 gal, vertical orientation, 30 in. diameter, 88.5 in. overall height. ASME Approved steel construction for large industrial compressed air systems.
Search 6CJL3 Series →Use this table as a decision shortcut. Ask ChatMRO for the exact part once you know which row fits your spec.
| Model | Capacity | Orientation | Best For | Overall Height/Length | Certification | ChatMRO Verdict |
|---|---|---|---|---|---|---|
| Speedaire 1TZZ6 | 30 gal | Vertical | Small shops, single small compressor | 40.5 in. height | ASME U Code | Best entry point for compact footprint installations |
| Speedaire 1TZZ7 | 60 gal | Vertical | General shop use, moderate demand | 52 in. height | ASME U Stamp | Good middle ground when 30 gal isn't sufficient buffer |
| Speedaire 5Z360 | 60 gal | Horizontal | Low-clearance installations needing 60 gal capacity | 48 in. length | ASME U/UM Stamp | Use when ceiling height limits vertical tank installation |
| Speedaire 1YAC4 | 80 gal | Vertical | Commercial facilities, moderate compressor HP | 49.5 in. height | ASME U Stamp | Most common choice for general commercial compressed air systems |
| Speedaire (120 gal class) | 120 gal | Vertical | Larger commercial/light industrial demand | 70.5 in. height | ASME U/UM Stamp | Go-to when 80 gal doesn't provide enough buffer against demand spikes |
| Speedaire 6CJL3 | 240 gal | Vertical | Large industrial facilities, high compressor HP | 88.5 in. height | ASME Approved | Use for maximum buffer volume in large-scale facilities |
Not sure which row is yours? Describe your application to ChatMRO and get an instant AI-matched recommendation with datasheets.
Traditional catalogues force you to know the exact MPN before you find anything. ChatMRO flips that: describe what you need in plain English, and the AI finds the right air tank from 30M+ indexed parts.
In plain language — by tank capacity, orientation, or compressor HP. No MPN required.
Natural language processing maps your description to the closest-fit products across brands and specs.
Cross-brand equivalents, lower-cost substitutes, and in-stock alternatives shown side-by-side.
Add to cart or request RFQ directly from the results. No phone calls. No email chains.
Whether you're a facilities engineer sizing a new compressed air system, or a shop owner replacing a worn-out receiver — use this framework before you procure.
Larger tank volume reduces compressor cycling frequency and better absorbs demand spikes — check manufacturer guidance on recommended tank size per compressor HP rather than defaulting to the smallest available option.
Verify your compressor's discharge pressure and system requirements fall within the tank's 200 psi maximum operating pressure rating.
Vertical tanks minimize floor footprint but require adequate ceiling height; horizontal tanks suit low-clearance installations but need more floor space.
Most stationary air tanks require ASME U Stamp certification for code compliance; larger tanks may also carry a UM Stamp — confirm your local code and insurance requirements before ordering.
Confirm the tank's NPT port sizes and locations accommodate your safety relief valve, pressure gauge, drain valve, and inlet/outlet piping connections.
Two tanks with the same gallon capacity can have very different floor space and height requirements. Search by function on ChatMRO — the AI surfaces exact matches AND available substitutes that fit your installation space.
An undersized tank causes excessive compressor cycling, reducing compressor lifespan and efficiency. Confirm the tank capacity matches or exceeds the manufacturer's recommendation for your compressor's HP.
Uncertified or improperly documented pressure vessels can fail code inspection or insurance requirements. Confirm ASME U Stamp (and UM Stamp where applicable) certification before installation.
Describing your application to ChatMRO takes 30 seconds. The AI reads the full Speedaire air tank catalogue so you don't have to.
Just describe what you need. ChatMRO finds the right Speedaire stationary air tank in seconds.
Speedaire stationary air tanks are among the most widely specified compressed air storage components across shops, commercial facilities, and industrial plants. The Speedaire brand commands significant market presence due to its broad capacity range from 30 to 240 gallons, ASME U Stamp and UM Stamp certified steel construction, and availability in both vertical and horizontal orientations to suit varying facility layouts. Procurement professionals and facilities engineers in India, Southeast Asia, and North America regularly source Speedaire air tanks for compressed air system installation, compressor replacement projects, and demand-buffering upgrades.
ChatMRO simplifies this procurement process by providing AI-powered natural language search across a catalogue of 30 million+ indexed industrial parts. Buyers no longer need to memorize MPN codes or navigate multi-level filter trees to find the right air tank. A simple description of the tank capacity, orientation, or compressor setup is sufficient to surface the correct Speedaire product alongside cross-brand alternatives and real-time pricing.
