Ingersoll Rand TS5 Air Compressor Sourcing
The fastest way to find, compare and buy Ingersoll Rand TS5 air compressors.
Describe the CFM you need, your voltage and phase, or the shop air application you have. ChatMRO finds the exact Ingersoll Rand match, shows alternatives, and gives you a quote — in seconds. No part number needed.
AI-generated imageThe Ingersoll Rand TS5 is a 5 HP, two-stage, cast iron reciprocating air compressor from Ingersoll Rand's Type-30 TS Series. A two-stage design compresses the air in two steps, which is how the TS5 reaches a 175 psi maximum operating pressure. It is sold in two main forms: as the TS5 Bare, a compressor pump that bolts to your own tank and motor, and as a complete package such as the TS5N5, which adds an 80 gallon vertical tank, motor, and accessories.
Shops and industrial facilities rely on the TS5 for stationary shop air that runs air tools and general pneumatic equipment. Distributor listings for the complete TS5N5 unit cite a durable cast iron, two-stage enblock design and a 100% continuous-duty rating. Internally, the pump is splash lubricated and uses stainless steel finger valves, which the distributor describes as providing increased volumetric efficiency and corrosion resistance. Ingersoll Rand's owner's manual states plainly that these compressors are not designed, intended, or approved for breathing air.
Common configuration for the TS5 Bare pump: 5 HP, two-stage, 175 psi maximum pressure, 16.5 CFM free air at 175 psi, 1,500 RPM pump speed, counter-clockwise rotation, a 14-1/2" flywheel included with a single A-section groove, 40.64 oz (about 1.2 L) oil capacity, and a 1/2" NPT outlet. The pump measures roughly 15" W x 14" D x 24" H and ships at about 134 lb. The complete TS5N5 package is listed with an 80 gallon vertical tank, 5 HP motor, 175 psi, 17 CFM at 175 psi, a 1/2" NPT outlet, roughly 31" L x 73" H, and about 450 lb. It is offered in 230V single-phase or 200, 230, 460, or 575V three-phase, and the voltage and phase must be specified at the time of order.
Stop second-guessing. Match your use case below — then let ChatMRO's AI surface the exact configuration, voltage, and alternatives in one natural-language search.
Facilities that already have a tank, motor, and piping and just need a new pump. The TS5 Bare dominates here.
New installations or full replacements that need the pump, motor, and tank as one package. The TS5N5 dominates here.
Plants with three-phase power or a particular supply voltage.
Ingersoll Rand's TS Series is sold as bare pumps and as complete tank-mounted compressors, with the TS5 as the 5 HP model. Here's how to navigate the options without a 40-tab browser session.
ChatMRO indexes the full Ingersoll Rand compressor and pump catalogue. Search any product by description, application, or rough spec.
The pump-replacement workhorse. 5 HP, two-stage, 175 psi, 16.5 CFM at 175 psi, 1,500 RPM, splash lubricated with 40.64 oz oil capacity, 14-1/2" flywheel included, 1/2" NPT outlet, cast iron with stainless steel finger valves. About 15" W x 14" D x 24" H.
Search TS5 Bare Series →The complete shop air package. 80 gallon vertical tank, 5 HP, two-stage, 175 psi, 17 CFM at 175 psi, 1/2" NPT outlet, 100% continuous-duty rating listed. Available in 230V single-phase or 200/230/460/575V three-phase, with voltage and phase specified at order.
Search TS5N5 Series →The TS Series covers a range of power ratings, with distributors listing pumps from about 3 to 15 HP. The owner's manual covers the TS4 and TS5 together and lists a 40 oz (1.2 L) oil capacity for both.
Search Type-30 TS Series →Use this table as a decision shortcut. Ask ChatMRO for the exact part once you know which row fits your spec.
| Model | Form | HP / Stages | Max Pressure | Free Air Delivery | Best For | ChatMRO Verdict |
|---|---|---|---|---|---|---|
| TS5 Bare | Bare pump | 5 HP / 2-stage | 175 psi | 16.5 CFM @ 175 psi | Replacing a pump on an existing tank and motor | Best when you already have the tank, motor, and piping |
| TS5N5 (single-phase) | 80 gal vertical package | 5 HP / 2-stage | 175 psi | 17 CFM @ 175 psi | Complete shop air system on 230V single-phase | Most common complete package for shops without three-phase power |
| TS5N5 (three-phase) | 80 gal vertical package | 5 HP / 2-stage | 175 psi | 17 CFM @ 175 psi | Facilities with 200/230/460/575V three-phase supply | Use when your plant runs three-phase power |
| Ingersoll Rand TS4 (comparison) | TS Series pump | Model-specific | Model-specific | Model-specific | Lighter air demand within the same TS family | Consider when the TS5's capacity exceeds your needs |
| Single-stage compressor (comparison) | Varies | Varies | Lower ceiling than two-stage | Model-specific | Intermittent, lighter-duty air needs | Not a substitute where 175 psi two-stage performance is required |
| Generic Import Two-Stage Compressor | Variable | Variable | Variable | Variable | Budget, occasional light use | Verify actual CFM at pressure and duty rating before relying on it |
Not sure which row is yours? Describe your application to ChatMRO and get an instant AI-matched recommendation with datasheets.
Traditional catalogues force you to know the exact MPN before you find anything. ChatMRO flips that: describe what you need in plain English, and the AI finds the right compressor from 30M+ indexed parts.
In plain language — by CFM, voltage and phase, or shop air application. No MPN required.
Natural language processing maps your description to the closest-fit products across brands and specs.
Cross-brand equivalents, lower-cost substitutes, and in-stock alternatives shown side-by-side.
Add to cart or request RFQ directly from the results. No phone calls. No email chains.
Whether you're a maintenance manager replacing a worn pump, or a shop owner specifying a new compressed air system — use this framework before you procure.
The TS5 Bare is just the pump, with flywheel included, for use with your own motor and tank. The TS5N5 adds the 80 gallon vertical tank and motor. Choose based on what you already have installed.
The TS5N5 is offered in 230V single-phase or 200, 230, 460, or 575V three-phase, and voltage and phase must be specified at order. Confirm your supply before requesting a quote.
Published figures are 16.5 CFM at 175 psi for the bare pump and 17 CFM at 175 psi for the complete unit, and published numbers vary by source and test pressure. Confirm the CFM you need at your working pressure.
Ingersoll Rand's manual calls for at least 12 inches (305 mm) of clearance on all sides for air circulation. The complete 80 gallon unit is roughly 31" long, 73" tall, and about 450 lb.
The pump is splash lubricated with about 40 oz (1.2 L) of oil, and the manual gives viscosity guidance by ambient temperature. These compressors are not approved for breathing air.
The TS5N5 must be ordered with voltage and phase specified. Search by function on ChatMRO — the AI surfaces exact matches AND available substitutes for your actual power supply.
Published CFM varies by source and test pressure, so compare numbers at the same pressure rather than assuming two listings are directly comparable.
Ingersoll Rand states these compressors are not designed, intended, or approved for breathing air, because intake air can contain carbon monoxide or other contaminants.
Describing your application to ChatMRO takes 30 seconds. The AI reads the full Ingersoll Rand compressor catalogue so you don't have to.
The TS5 Bare is the compressor pump only (5 HP, two-stage, 175 psi, flywheel included, 1/2" NPT outlet), meant to be fitted to your own tank and motor. The TS5N5 is a complete stationary package with an 80 gallon vertical tank and 5 HP motor. Search both on ChatMRO to compare pricing and availability instantly.
Maximum operating pressure is 175 psi, with 16.5 CFM at 175 psi listed for the bare pump and 17 CFM at 175 psi listed for the complete TS5N5. ChatMRO can surface compressors at different CFM ratings from a single description search.
The TS5N5 is listed in 230V single-phase or 200, 230, 460, or 575V three-phase. Voltage and phase must be specified at the time of order. ChatMRO provides access to manufacturer electrical specifications directly from search results.
The pump is splash lubricated with an oil capacity of about 40 oz (1.2 L), and Ingersoll Rand's manual gives viscosity guidance by ambient temperature, for example ISO 100 / SAE 30 for 40 to 80°F surroundings. For specific operating conditions the manual refers you to Ingersoll Rand. If you're unsure which oil or configuration fits your setup, describe your application to ChatMRO and get an AI recommendation in seconds.
ChatMRO indexes Ingersoll Rand inventory from multiple distributors across India, Southeast Asia, US, and EU. Search by part name, description, or rough spec — you'll see real-time stock levels and can request a quote in under 60 seconds without calling a single distributor.
Yes — that's exactly what ChatMRO is built for. Describe the CFM you need, your voltage and phase, and the shop air application in plain English. The AI matches your description against 30M+ indexed parts and returns the closest Ingersoll Rand SKU with datasheet, alternatives, and a quote option. Try it now — no account required.
Just describe what you need. ChatMRO finds the right Ingersoll Rand air compressor in seconds.
The Ingersoll Rand TS5 is a widely specified 5 HP two-stage reciprocating air compressor for stationary shop air, available as a bare pump and as a complete 80 gallon vertical tank package. Ingersoll Rand commands significant market presence in industrial compressed air with a cast iron, splash-lubricated Type-30 TS Series design, stainless steel finger valves, 175 psi maximum pressure, and a 100% continuous-duty rating listed on the complete TS5N5 unit. Procurement professionals and maintenance managers in India, Southeast Asia, and North America regularly source TS5 pumps and packages for shop air, pump replacement, and facility compressed air upgrades.
ChatMRO simplifies this procurement process by providing AI-powered natural language search across a catalogue of 30 million+ indexed industrial parts. Buyers no longer need to memorize model codes or navigate multi-level filter trees to find the right compressor. A simple description of the CFM you need, your voltage and phase, or the shop air application is sufficient to surface the correct Ingersoll Rand product alongside cross-brand alternatives and real-time pricing.
