Rheem G76-200 Natural Gas Commercial Water Heater Sourcing
The fastest way to find, compare and buy the Rheem G76-200 commercial water heater.
Describe the tight retrofit space, recovery need, or facility you need to supply. ChatMRO finds the exact Rheem match, shows alternatives, and gives you a quote — in seconds. No part number needed.
AI-generated imageThe Rheem G76-200 is a 76-gallon natural gas commercial water heater from Rheem's Universal Heavy Duty series, engineered with a narrow jacket diameter and short floor-to-vent height specifically to fit into tight commercial retrofit spaces where a replacement unit must slot into an existing mechanical room footprint. Top, front, and rear water inlet/outlet connections give installers flexibility to match whatever plumbing configuration the space already has, and a factory-installed AGA/ASME-rated temperature and pressure relief valve, full-port full-flow brass drain valve, and low-profile automatic flue damper come standard.
Motels, hotels, gyms, schools, restaurants, and general businesses rely on the G76-200 wherever natural gas service is available and hot water demand exceeds what a residential-class unit can sustain. Rheem's patented multi-flue heat exchanger design, combined with a proprietary steel formulation and two coats of porcelain enamel, is built for durability under continuous commercial recovery cycling, while precision high-chromium stainless steel burners slide out drawer-style for quick inspection and maintenance without removing the whole burner assembly. The System Sentinel LED diagnostic system verifies the unit's operating sequence step by step, giving service technicians a fast, visual way to isolate a fault.
Common configuration: 76-gallon tank capacity, 199,900 BTU/hour input (199,000 BTU/hr per some documentation), natural gas fuel (LP propane variant also available as G76-200 LP), direct spark-to-pilot ignition, 80% thermal efficiency, recovery rate of approximately 215 GPH at a 90°F rise (up to ~485 GPH at lower temperature rise per some specification sheets), 6" draft hood/vent outlet size, 150 psi maximum working pressure, 1-1/2" x 1-1/2" top water connections plus 1-1/2" front/rear connections, 3/4" gas connection, porcelain-enameled steel tank construction with fiberglass insulation, patented anode rod, bolted hand hole cleanout, and a maximum temperature setting of 180°F. Tank dimensions are approximately 26-1/4" diameter x 64" height (68-13/16" to 68.81" including the draft hood), with a 3-year limited tank warranty and 1-year parts warranty, standby loss of roughly 1,208.8 BTU/hour, and 0.3A draw at 120VAC.
Stop second-guessing. Match your use case below — then let ChatMRO's AI surface the exact fuel type, capacity, and alternatives in one natural-language search.
Motels, hotels, restaurants, gyms, and schools with natural gas utility service available. The G76-200N dominates here.
Rural or off-grid commercial buildings where propane is the available fuel source, needing the same tight-retrofit form factor. The G76-200 LP dominates here.
Facilities needing more or less capacity than 76 gallons within the same Universal design family.
Rheem's Universal Heavy Duty series is purpose-built for tight commercial retrofit applications, spanning 76 to 100+ gallon capacities across both natural gas and propane fuel options. Here's how to navigate the range without a 40-tab browser session.
ChatMRO indexes the full Rheem Universal series catalogue. Search any product by description, application, or rough spec.
The tight-retrofit workhorse for natural gas-supplied facilities. 76 gal capacity, 199,900 BTU/hour, 80% thermal efficiency, direct spark-to-pilot ignition. Porcelain-enameled steel tank, high-chromium stainless steel drawer-style burners, factory-installed AGA/ASME T&P relief valve, 3-year tank / 1-year parts warranty.
Search G76-200N Series →Identical tank capacity, BTU rating, and compact jacket dimensions as the natural gas model, configured for liquid propane fuel supply. 26-1/4" diameter x 64" height, 6" vent, 150 psi rated working pressure, low-profile automatic flue damper.
Search G76-200 LP Series →Additional Universal series models spanning 65 to 100+ gallon capacities and up to 399,900 BTU/hour inputs, sharing the same compact jacket design philosophy and System Sentinel diagnostics for facilities needing a different capacity point.
Search G100-200/G65-360N Series →Use this table as a decision shortcut. Ask ChatMRO for the exact part once you know which row fits your spec.
| Model | Capacity | BTU Input | Best For | Fuel Type | Recovery Rate | ChatMRO Verdict |
|---|---|---|---|---|---|---|
| G76-200N | 76 gal | 199,900 BTU/hr | Natural gas-supplied motels, hotels, restaurants | Natural Gas | ~215 GPH @ 90°F rise | Most common choice for natural gas-fueled facilities needing 76 gal capacity |
| G76-200 LP | 76 gal | 199,900 BTU/hr | Propane-supplied facilities, same footprint need | Liquid Propane | ~215 GPH @ 90°F rise | Direct equivalent when propane service is available instead of natural gas |
| G76-200-1 | 76 gal | 199,900 BTU/hr | Home Depot/retail channel SKU, same core specs | Natural Gas | ~215-485 GPH (spec sheet dependent) | Cross-reference to standard G76-200N for equivalent specs |
| G100-200 | 100 gal | 199,900 BTU/hr | Larger facilities needing more stored capacity at same BTU | NG or LP | ~138-485 GPH (temp rise dependent) | Use when 76 gal capacity falls short of peak-hour demand |
| G65-360N | 65 gal | 360,000 BTU/hr class | Facilities prioritizing very fast recovery over stored volume | Natural Gas | Higher than G76-200 class | Consider when recovery speed matters more than tank size |
| Generic Import Commercial Water Heater | Variable | Variable | Budget, occasional light use | Variable | Manufacturer-stated only | Verify AGA/ASME T&P relief valve and porcelain-enamel tank lining before daily commercial use |
Not sure which row is yours? Describe your application to ChatMRO and get an instant AI-matched recommendation with datasheets.
Traditional catalogues force you to know the exact MPN before you find anything. ChatMRO flips that: describe what you need in plain English, and the AI finds the right water heater from 30M+ indexed parts.
In plain language — by fuel type, capacity, or facility type. No MPN required.
Natural language processing maps your description to the closest-fit products across brands and specs.
Cross-brand equivalents, lower-cost substitutes, and in-stock alternatives shown side-by-side.
Add to cart or request RFQ directly from the results. No phone calls. No email chains.
Try these commercial water heater search examples
Whether you're a facilities manager replacing an aging natural gas water heater, or a plumbing contractor specifying a unit for a new motel build — use this framework before you procure.
Verify whether your facility has natural gas or liquid propane (LP) service before ordering — the G76-200 is available in both fuel configurations with identical capacity and BTU rating, but they are not interchangeable.
Confirm the unit's 26-1/4" diameter and roughly 64"-68.81" overall height (depending on whether the draft hood is included) fit your available space, especially in tight retrofit installations replacing an older, differently-sized unit.
Recovery rate is approximately 215 GPH at a 90°F rise but varies with temperature rise — confirm your incoming water temperature and target setpoint before assuming a specific recovery figure applies to your installation.
The unit offers 1-1/2" top connections plus 1-1/2" front/rear connections — confirm which configuration matches your existing plumbing routing to simplify installation.
If your facility's peak-hour demand exceeds what 76 gallons plus the rated recovery can support, consider the larger G100-200 or a multi-unit configuration instead.
The natural gas and LP versions share the same model family designation pattern but require different fuel connections and internal components — confirm NG vs. LP explicitly before ordering, since they are not field-convertible on this model line. Search by function on ChatMRO — the AI surfaces exact matches AND available substitutes for your specific fuel type.
The unit's 199,900 BTU/hour rating is input, not output — actual delivered heat is reduced by the 80% thermal efficiency rating, which affects real-world recovery performance calculations.
Recovery rate figures (e.g., 215 GPH) are stated at a specific temperature rise (commonly 90°F) — colder incoming water increases the required rise and reduces effective recovery versus the same unit's rated performance at a smaller rise.
Describing your application to ChatMRO takes 30 seconds. The AI reads the full Rheem Universal series catalogue so you don't have to.
Both share the same 76-gallon tank capacity, 199,900 BTU/hour input, and compact Universal series jacket dimensions, but the G76-200N model is configured for natural gas fuel while the LP model is configured for liquid propane — the two are not interchangeable without a proper fuel conversion kit if one is even available. Search both fuel variants on ChatMRO to compare pricing and availability instantly.
The Universal series features a short floor-to-vent height and narrow jacket diameter, combined with top, front, and rear water inlet/outlet connections, giving installers flexibility to match existing plumbing configurations without structural modification — a key advantage when replacing an older commercial water heater in a space-constrained mechanical room. ChatMRO can surface tight-retrofit-compatible models from a single description search.
The recovery rate is approximately 215 GPH at a 90°F temperature rise per some specification sheets, though other documentation lists a range up to roughly 485 GPH at a lower temperature rise — actual recovery in your specific application depends on your incoming water temperature and target setpoint. ChatMRO provides access to manufacturer recovery rate charts directly from search results.
The unit carries a factory-installed AGA/ASME-rated temperature and pressure relief valve and complies with applicable standards including ANSI Z21.10.3, NSF 5, ASHRAE, AHRI, UL, and CSA, reflecting its design for commercial-grade code compliance. If you're unsure which certifications your installation jurisdiction requires, describe your application to ChatMRO and get an AI recommendation in seconds.
ChatMRO indexes Rheem inventory from multiple distributors across India, Southeast Asia, US, and EU. Search by part name, description, or rough spec — you'll see real-time stock levels and can request a quote in under 60 seconds without calling a single distributor.
Yes — that's exactly what ChatMRO is built for. Describe the fuel type, retrofit space constraints, and facility type in plain English. The AI matches your description against 30M+ indexed parts and returns the closest Rheem SKU with datasheet, alternatives, and a quote option. Try it now — no account required.
Just describe what you need. ChatMRO finds the right Rheem commercial water heater in seconds.
The Rheem G76-200 is among the most widely specified natural gas commercial water heaters for motels, hotels, restaurants, gyms, schools, and general commercial buildings requiring tight-retrofit compatibility. Rheem's Universal Heavy Duty series commands significant market presence due to its compact jacket design with flexible water connection points, patented multi-flue heat exchanger construction, and System Sentinel LED diagnostic system for straightforward field troubleshooting. Procurement professionals and facilities managers in India, Southeast Asia, and North America regularly source Rheem Universal series water heaters for commercial hot water system replacement, tight mechanical room retrofits, and new commercial building installations.
ChatMRO simplifies this procurement process by providing AI-powered natural language search across a catalogue of 30 million+ indexed industrial parts. Buyers no longer need to memorize model codes or navigate multi-level filter trees to find the right water heater. A simple description of the fuel type, retrofit space, or facility type is sufficient to surface the correct Rheem product alongside cross-brand alternatives and real-time pricing.
