General Tools Jumper Lead Kit Sourcing
The fastest way to find, compare and buy General Tools jumper lead kits.
Describe the circuit you're testing, the number of connections, or the lead length you need. ChatMRO finds the exact General Tools match, shows alternatives, and gives you a quote — in seconds. No part number needed.
AI-generated imageA jumper lead kit is a set of short insulated wires fitted with alligator clips, used to make temporary electrical connections between components, terminals, and test points without soldering. The clips bite onto a terminal, wire, or component lead and hold the connection in place hands-free. The General Tools CT800 is described by the manufacturer as a jumper lead kit with shielded alligator clips, and it supplies 10 leads in five colors so individual connections are easy to tell apart at a glance.
Electronics technicians, maintenance staff, students, and hobbyists rely on jumper leads to connect instruments to a circuit, make temporary connections, and run quick tests while a circuit is being built or diagnosed. Color coding is the practical advantage of a kit like the CT800: with two leads each in white, red, black, yellow, and green, a user can assign a color to each signal, power, or ground connection and trace a multi-point setup quickly. The kit is intended for low-voltage work, with a listed maximum of 300V.
Common configuration for the CT800: 10 alligator-clip leads (2 each white, red, black, yellow, and green), 18" (45.72 cm) lead length, 22 AWG wire, 300V maximum voltage, and 2.9 oz (82.21 g) total weight, with a one-year warranty. The manufacturer part number is CT800, and distributors list it as a 10-pack of multi-colored test leads. The listings reviewed do not state a current (amp) rating, so confirm that with your supplier before using the leads to carry significant current.
Stop second-guessing. Match your use case below — then let ChatMRO's AI surface the exact kit, lead length, and alternatives in one natural-language search.
Bench setups where circuits are built, tested, and changed often. The CT800 10-lead kit dominates here.
Setups with many simultaneous connections where it helps to tell each one apart at a glance. The five-color CT800 set dominates here.
Quick temporary connections between instruments and a circuit under test.
General Tools & Instruments sells its jumper lead kit as the CT800. Because the brand's offering here is a single kit, this section also lists comparable options so you can judge where the CT800 fits. Here's how to navigate sourcing without a 40-tab browser session.
ChatMRO indexes jumper lead and test lead kits across manufacturers. Search any product by description, application, or rough spec.
The color-coded bench workhorse. 10 leads (2 each white, red, black, yellow, green), 18" length, 22 AWG, 300V maximum, 2.9 oz total, one-year warranty. Described by the manufacturer as a jumper lead kit with shielded alligator clips.
Search CT800 Series →Comparable sets from other brands, such as the CEN-TECH 66717 (10 leads, 5 colors, 18", 28 AWG, up to 300V), offer the same layout with a thinner wire gauge. Useful as a lower-cost reference for very light-duty work.
Search Comparable Light-Duty Sets →Other suppliers list 14-18 AWG silicone-insulated leads in 39.6" to 6.6 ft lengths with ratings of 15-20A, suited to longer reach or higher current than a 22 AWG kit is intended for.
Search Heavy-Duty Silicone Lead Series →Use this table as a decision shortcut. Ask ChatMRO for the exact part once you know which row fits your spec.
| Option | Lead Count / Colors | Length | Wire Gauge | Voltage / Current | Best For | ChatMRO Verdict |
|---|---|---|---|---|---|---|
| General Tools CT800 | 10 leads / 5 colors | 18" (45.72 cm) | 22 AWG | 300V max; current not listed | Bench testing and color-coded multi-point connections | Most common choice for general low-voltage bench work |
| CEN-TECH 66717 (comparison) | 10 leads / 5 colors | 18" | 28 AWG | Up to 300V | Very light-duty bench use at lower cost | Thinner gauge, consider only for the lightest work |
| E-Z-Hook 684 (comparison) | Single lead | Model-specific | 18 AWG PVC | Not listed | Component testing with insulated alligator clips and heavier wire | Consider when 18 AWG wire and insulated clip sleeves are needed |
| Heavy-duty silicone leads (comparison) | 2 to 5 leads | 39.6" to 6.6 ft | 14-18 AWG | 15-20A listed by suppliers | Longer reach or higher current | Use when a 22 AWG, 18" lead isn't enough |
| Multimeter test lead kit with probes (comparison) | Varies | Varies | Varies | Varies; CAT-rated kits available | Measuring with meter probes rather than clipping on | Not a substitute; probes and clip jumpers do different jobs |
| Generic Import Jumper Lead Set | Variable | Variable | Variable | Manufacturer-stated only | Budget, occasional light use | Verify wire gauge and voltage rating before relying on it |
Not sure which row is yours? Describe your application to ChatMRO and get an instant AI-matched recommendation with datasheets.
Traditional catalogues force you to know the exact MPN before you find anything. ChatMRO flips that: describe what you need in plain English, and the AI finds the right lead kit from 30M+ indexed parts.
In plain language — by circuit type, number of connections, or lead length. No MPN required.
Natural language processing maps your description to the closest-fit products across brands and specs.
Cross-brand equivalents, lower-cost substitutes, and in-stock alternatives shown side-by-side.
Add to cart or request RFQ directly from the results. No phone calls. No email chains.
Whether you're an electronics technician equipping a bench, or a maintenance team stocking a test kit — use this framework before you procure.
The CT800 is rated to a maximum of 300V and is intended for low-voltage work. Don't use it on circuits that exceed that rating.
The leads are 22 AWG, and the listings reviewed don't state an amp rating. Confirm current capacity with your supplier, and choose heavier-gauge leads if you need to carry more current.
The kit has 10 leads, two each in five colors. If your setup has more connection points than that, order additional kits.
The 18" length suits a typical benchtop. For longer reach, look at leads in the 39.6" to 6.6 ft range.
The CT800 is described as having shielded alligator clips. Confirm the clips suit the size and type of terminals you'll be clamping, since clip jaw sizes vary between products.
The CT800 is rated to 300V maximum and uses 22 AWG wire. Search by function on ChatMRO — the AI surfaces exact matches AND available substitutes rated for your actual voltage and current.
The CT800 contents are the 10 alligator-clip leads only. If you need to probe test points with a multimeter, you'll need a separate multimeter test lead kit.
No amp rating appears in the listings reviewed. Don't assume the leads are suited to high-current use; confirm with the supplier first.
Describing your application to ChatMRO takes 30 seconds. The AI reads jumper lead kit spec sheets across brands so you don't have to.
The kit contains 10 alligator-clip leads, two each in white, red, black, yellow, and green. Each lead is 18 inches (45.72 cm) long, the wire is 22 AWG, the maximum voltage is 300V, and the whole kit weighs 2.9 oz (82.21 g). It carries a one-year warranty. Search this kit on ChatMRO to compare pricing and availability instantly.
The CT800 is listed with a 300V maximum voltage. The listings reviewed do not state a current rating, so confirm that with your supplier before using the leads for higher-current work. ChatMRO can surface leads at different ratings from a single description search.
They are used to make temporary electrical connections, connect instruments to a circuit, and run quick tests without soldering, with alligator clips holding each connection in place. ChatMRO provides access to manufacturer application guidance directly from search results.
No. The CT800 includes only the 10 alligator-clip jumper leads. If you need to probe test points with a meter, you'll want a separate multimeter test lead kit. If you're unsure which kind of lead fits your task, describe your application to ChatMRO and get an AI recommendation in seconds.
ChatMRO indexes General Tools inventory from multiple distributors across India, Southeast Asia, US, and EU. Search by part name, description, or rough spec — you'll see real-time stock levels and can request a quote in under 60 seconds without calling a single distributor.
Yes — that's exactly what ChatMRO is built for. Describe the circuit you're testing, the number of connections, and the lead length you need in plain English. The AI matches your description against 30M+ indexed parts and returns the closest General Tools SKU with datasheet, alternatives, and a quote option. Try it now — no account required.
Just describe what you need. ChatMRO finds the right General Tools jumper lead kit in seconds.
The General Tools CT800 jumper lead kit is a widely stocked set of color-coded alligator-clip leads for electronics bench testing, circuit prototyping, and temporary low-voltage connections. General Tools & Instruments commands market presence in this segment with a 10-lead, five-color kit built from 22 AWG wire at 18 inches, rated to 300V, and backed by a one-year warranty. Procurement professionals and electronics technicians in India, Southeast Asia, and North America regularly source jumper lead kits for repair benches, teaching labs, and maintenance test kits.
ChatMRO simplifies this procurement process by providing AI-powered natural language search across a catalogue of 30 million+ indexed industrial parts. Buyers no longer need to memorize model codes or navigate multi-level filter trees to find the right lead kit. A simple description of the circuit, the number of connections, or the lead length you need is sufficient to surface the correct General Tools product alongside cross-brand alternatives and real-time pricing.
