Fill-Rite FR610GA 115V AC Fuel Transfer Pump Sourcing
The fastest way to find, compare and buy Fill-Rite 115V AC fuel transfer pumps.
Describe the tank size, fuel type, or nozzle preference you need. ChatMRO finds the exact Fill-Rite match, shows alternatives, and gives you a quote — in seconds. No part number needed.
AI-generated imageThe Fill-Rite FR610GA is a 115V AC-powered fuel transfer pump built around a self-priming rotary vane pump mechanism, using cast bronze rotor and vanes to draw fuel up a telescoping steel suction pipe and deliver it through a discharge hose fitted with an automatic shut-off nozzle. Rotary vane technology maintains consistent flow performance even as internal components wear over the pump's service life, and a built-in check valve and strainer protect the pump and downstream equipment from debris and backflow.
Farms, construction sites, fleet operators, and facilities with on-site fuel storage rely on the FR610GA wherever a stationary aboveground tank needs a reliable, code-compliant way to dispense fuel into vehicles and equipment without manual hand-pumping. Its 2" NPT bung mount threads directly into a standard tank bung, and a removable, 180-degree rotating junction box simplifies electrical wiring even in tight installation spaces. Fill-Rite's 600 Series — of which the FR610GA is the automatic-nozzle configuration — carries a limited lifetime warranty on the pump itself and is UL/cUL listed for safety compliance.
Common configuration: 115V AC, 60 Hz, 1/4 HP explosion-proof motor with permanent magnet, 15 GPM (57 LPM) flow rate, 1" inlet x 3/4" outlet, 2" NPT threaded bung mount, cast iron pump housing with cast bronze rotor and rotary vanes, telescoping steel suction pipe (roughly 22"-40" or 20"-34.5" depending on kit), 3/4" x 12' discharge hose with static ground wire, automatic shut-off nozzle, thermal overload protection, and a 30-minute duty cycle rating. Rated to pull fuel from tank depths up to 8 ft and discharge to heights up to 37 ft, and compatible with gasoline, diesel, kerosene, ethanol blends up to E15, biodiesel blends up to B20, and mineral spirits — not for use with aviation fuel.
Stop second-guessing. Match your use case below — then let ChatMRO's AI surface the exact nozzle type, kit contents, and alternatives in one natural-language search.
Fleet refueling and frequent-use stationary tanks where automatic shut-off reduces spill risk and speeds up dispensing. The FR610GA (automatic nozzle) dominates here.
General fuel transfer where manual trigger control is preferred or required. The FR610G (manual nozzle) dominates here.
Applications without reliable 115V AC power, such as mobile transfer tanks or remote job sites.
Fill-Rite (a Tuthill Transfer Systems brand, made in the USA) is the industry-standard name in fuel transfer pumps, with the 600/H-Series covering AC and DC stationary and mobile tank applications. Here's how to navigate the range without a 40-tab browser session.
ChatMRO indexes the full Fill-Rite fuel transfer pump catalogue. Search any product by description, application, or rough spec.
The high-volume workhorse. 15 GPM, 1/4 HP explosion-proof motor, 2" NPT bung mount, cast iron housing with cast bronze rotor and vanes. Includes telescoping steel suction pipe, 3/4" x 12' hose with static ground wire, automatic shut-off nozzle, PTFE tape, and street elbow. UL/cUL listed, limited lifetime warranty.
Search FR610GA/FR610HA Series →Same 15 GPM rotary vane pump, 1/4 HP motor, and cast iron/bronze construction as the GA models, fitted with a manual trigger nozzle instead of automatic shut-off. Replaces the earlier FR610C. Same hose, suction pipe, and installation hardware included.
Search FR610G/FR610H Series →Same H-Series family in 12V and 24V DC configurations for mobile transfer tanks and off-grid job sites where 115V AC power isn't available, at 15-20 GPM flow rates depending on model.
Search FR1204H/FR2404H Series →Use this table as a decision shortcut. Ask ChatMRO for the exact part once you know which row fits your spec.
| Model | Nozzle Type | Flow Rate | Best For | Voltage | Duty Cycle | ChatMRO Verdict |
|---|---|---|---|---|---|---|
| FR610GA | Automatic shut-off | 15 GPM | High-volume dispensing, fleet refueling | 115V AC | 30 min | Most common choice for automatic hands-free tank filling |
| FR610G | Manual | 15 GPM | General dispensing with manual control preferred | 115V AC | 30 min | Good when operator wants direct trigger control |
| FR610HA | Automatic shut-off | 15 GPM (57 LPM) | Agriculture and construction stationary tank use | 115V AC | 30 min | Equivalent automatic-nozzle option in the H-Series line |
| FR610H | Manual | 15 GPM (57 LPM) | Agriculture and construction, manual control | 115V AC | 30 min | Equivalent manual-nozzle option in the H-Series line |
| FR1204H (12V DC) | Manual/Automatic variant | 15 GPM | Mobile transfer tanks without AC power | 12V DC | Model-specific | Use when 115V AC power isn't available on-site |
| Generic Import 115V Fuel Pump | Variable | Variable | Budget, occasional light use | 115V AC | Manufacturer-stated only | Verify UL/cUL listing and fluid compatibility before daily fuel transfer use |
Not sure which row is yours? Describe your application to ChatMRO and get an instant AI-matched recommendation with datasheets.
Traditional catalogues force you to know the exact MPN before you find anything. ChatMRO flips that: describe what you need in plain English, and the AI finds the right pump from 30M+ indexed parts.
In plain language — by tank size, fuel type, or nozzle preference. No MPN required.
Natural language processing maps your description to the closest-fit products across brands and specs.
Cross-brand equivalents, lower-cost substitutes, and in-stock alternatives shown side-by-side.
Add to cart or request RFQ directly from the results. No phone calls. No email chains.
Whether you're a farm operator equipping a fuel tank, or a fleet manager standardizing refueling equipment across sites — use this framework before you procure.
The FR610GA uses a 2" NPT threaded bung mount — confirm your stationary tank has a compatible bung opening, or that a 55-gallon drum adapter is available if mounting to a drum instead.
Automatic shut-off nozzles reduce spill risk and speed up dispensing for high-volume or repetitive use; manual nozzles give the operator direct control and are simpler mechanically.
Confirm your fuel type (gasoline, diesel, kerosene, E15, B20 biodiesel, or mineral spirits) is on the pump's approved fluid list — this pump is explicitly not rated for aviation fuel.
This pump pulls fuel from tank depths up to 8 ft and discharges to heights up to 37 ft — confirm your tank depth and delivery point fall within this range.
The FR610GA requires a 115V AC electrical supply — if your installation location lacks reliable AC power, a 12V or 24V DC version from the same series may be more appropriate.
The 15 GPM flow rate is shared across both automatic and manual nozzle configurations. Search by function on ChatMRO — the AI surfaces exact matches AND available substitutes with the correct nozzle type for your workflow.
This pump is explicitly not rated for use with aviation fuel — confirm your specific fuel type against the approved compatibility list before installation.
The pump carries a 30-minute duty cycle rating — extended continuous operation beyond this can risk thermal overload, though built-in thermal overload protection helps guard against damage.
Describing your application to ChatMRO takes 30 seconds. The AI reads the full Fill-Rite fuel transfer pump catalogue so you don't have to.
Both are 115V AC, 15 GPM fuel transfer pumps sharing the same cast iron housing and rotary vane pump mechanism, but the FR610GA is fitted with an automatic shut-off nozzle while the FR610G uses a manual trigger nozzle. Search both models on ChatMRO to compare pricing and availability instantly.
The FR610GA is compatible with gasoline, diesel, kerosene, ethanol blends up to E15, biodiesel blends up to B20, and mineral spirits — it is explicitly not rated for use with aviation fuel. ChatMRO can surface fluid compatibility details for this and comparable pumps from a single description search.
The pump uses a 2" NPT threaded base designed for bung mounting directly onto a stationary aboveground fuel tank, with a telescoping steel suction pipe that extends down into the tank to draw fuel. ChatMRO provides access to manufacturer mounting and installation specifications directly from search results.
No — the FR610GA specifically requires a 115V AC electrical supply; if your installation location doesn't have reliable AC power, Fill-Rite's 600/H-Series family also offers 12V and 24V DC versions suited to mobile transfer tanks and off-grid locations. If you're unsure which voltage option fits your site, describe your application to ChatMRO and get an AI recommendation in seconds.
ChatMRO indexes Fill-Rite inventory from multiple distributors across India, Southeast Asia, US, and EU. Search by part name, description, or rough spec — you'll see real-time stock levels and can request a quote in under 60 seconds without calling a single distributor.
Yes — that's exactly what ChatMRO is built for. Describe the tank size, fuel type, and nozzle preference in plain English. The AI matches your description against 30M+ indexed parts and returns the closest Fill-Rite SKU with datasheet, alternatives, and a quote option. Try it now — no account required.
Just describe what you need. ChatMRO finds the right Fill-Rite fuel transfer pump in seconds.
The Fill-Rite FR610GA is among the most widely specified 115V AC fuel transfer pumps for stationary aboveground tank installations in agriculture, construction, and fleet operations. Fill-Rite, a Tuthill Transfer Systems brand made in the USA, commands significant market presence due to its proven rotary vane pump technology, cast iron and bronze construction rated for daily heavy-duty use, and UL/cUL listing with a limited lifetime warranty on the pump. Procurement professionals and facilities managers in India, Southeast Asia, and North America regularly source Fill-Rite fuel transfer pumps for on-site fuel dispensing, fleet refueling, and general stationary tank fuel transfer needs.
ChatMRO simplifies this procurement process by providing AI-powered natural language search across a catalogue of 30 million+ indexed industrial parts. Buyers no longer need to memorize model codes or navigate multi-level filter trees to find the right pump. A simple description of the tank size, fuel type, or nozzle preference is sufficient to surface the correct Fill-Rite product alongside cross-brand alternatives and real-time pricing.
