About BOPLA
BOPLA Modular Enclosure & Control Cabinet SolutionsPhoenix Mecano
BOPLA, a brand of Phoenix Mecano (a leading European industrial packaging and electronic enclosure manufacturer), supplies a comprehensive range of plastic and aluminum enclosures designed for industrial control, electronics assembly, and field instrumentation. BOPLA's modular approach enables rapid customization: customers can combine standard housing sizes, mounting hardware, cooling/ventilation options, and EMC-shielding accessories to meet unique application needs without long lead times or tooling charges.
BOPLA's product portfolio spans DIN rail enclosures (standard 35mm rail mounting for modular circuit boards and relay logic), terminal enclosures (for DIN-rail-mounted terminal blocks with flexible cable routing), controller enclosures (compact plastic housings for PCB-based control modules with internal component racks), and large wall-mount or pole-mount cabinets in aluminum (for extreme EMC/thermal duty) or fiberglass-reinforced plastic (for lighter weight and corrosion resistance). Protection ratings range from IP54 (dust and splash) to IP66 (complete dust seal and water jet resistance), meeting automotive, industrial automation, and outdoor equipment standards.
Aluminum enclosures from BOPLA deliver superior EMC shielding, thermal conductivity, and mechanical protection for sensitive electronics — ideal for factory automation controls, power distribution units, and RF-sensitive measurement instruments. Plastic variants in polyamide, polycarbonate, and ABS are lighter, more corrosion-resistant in salt-spray or chemical environments, and cost-effective for stationary indoor installations where thermal load is minimal. All housings accept quick-mount DIN rails, cable glands (PFLITSCH and other standard threading), and tool-less snap fasteners for rapid assembly.
BOPLA's modular design philosophy extends to accessories: pre-drilled mounting plates, pre-configured terminal blocks, cooling fans with thermostat kits, and cable entry plates integrate seamlessly into standard housing dimensions. Many customers standardize on a few BOPLA sizes (e.g., 300×400×200mm aluminum, 600×800×300mm fiberglass) and populate them with project-specific internal components, dramatically reducing procurement cycles and engineering overhead compared to custom-designed enclosures.
ChatMRO streamlines BOPLA enclosure procurement: describe your application (DIN rail terminal board, panel-mount controller, wall cabinet), required protection rating (IP54, IP66), material preference (aluminum, plastic, polycarbonate), and rough internal component footprint, and ChatMRO instantly retrieves matching BOPLA housings from 30M+ indexed inventory — complete with dimensional drawings, mounting templates, accessory compatibility, and lead times — enabling first-pass fit and rapid deployment.
Prefer a quick quote?
Get BOPLA Pricing in Your Inbox
Tell us your protection rating, internal space needs, and material preference — we'll match the exact BOPLA enclosure and mount options instantly.
Frequently asked questions
What is the difference between IP54, IP65, and IP66 protection ratings, and which enclosure should I choose?
IP54 protects against dust and light splashing; IP65 against dust and water jets; IP66 against complete dust sealing and high-pressure jets (e.g., washdown environments). Choose IP54 for clean indoor production floors; IP65 for light spray or occasional washdown; IP66 for outdoor, high-humidity, or aggressive water/chemical spray environments. BOPLA labels each enclosure with its IP rating — verify the rating matches your installation environment, as undersized protection will lead to premature corrosion and component failure.
Can I use a plastic (ABS/polycarbonate) BOPLA enclosure instead of aluminum for EMC shielding?
Plastic enclosures do NOT provide EMC shielding; aluminum variants offer ~60–80 dB attenuation depending on thickness and shielding design. If your control electronics must meet EMC emission limits (e.g., automotive immunity standards, industrial CE marking), use aluminum BOPLA or line the plastic enclosure's interior with conductive shielding tape and provide proper cable grounding — plastic is suitable only for non-critical electronics or shielded-cable installations with ground return paths.
How do I mount a BOPLA enclosure with DIN rail components inside?
BOPLA enclosures include pre-punched holes and mounting feet for 35mm DIN rail installation: slide the rail into the mounting brackets and tighten the locking clips or screws. Cable routing is flexible — most BOPLA designs include knock-out cable-entry holes that accept standard metric (M16–M50) or Pg-sized glands. Ensure adequate internal clearance for terminal block depth and cable bend radius, and mount the enclosure in a location where heat dissipation airflow is unobstructed if cooling is required.
What is the thermal operating range for BOPLA plastic and aluminum enclosures?
Standard plastic enclosures (ABS/polycarbonate) operate from –20 °C to +60 °C; specialized high-temperature variants may extend to +80 °C; aluminum BOPLA enclosures are rated –40 °C to +100 °C depending on the alloy and finish. Electronic components inside generate heat — if ambient temperature plus internal dissipation exceeds the enclosure rating, install a thermostat-controlled cooling fan or select an oversized housing to reduce internal temperature rise. Confirm your specific variant's datasheet limits before final installation.
Can BOPLA enclosures be customized with internal racks, mounting plates, or cooling fans?
Yes, BOPLA's modular philosophy enables extensive customization: internal mounting plates, DIN-rail-mounted circuit-board racks, pre-wired terminal blocks, and cooling fans with thermostats are available as accessory kits or can be specified at order. Many distributors offer assembly services — they configure the enclosure interior per your wiring diagram and deliver a ready-to-install control box. Contact your BOPLA distributor or reseller to discuss custom kit options and lead times.