The fastest way to find, compare and buy 24 RPM 115V open vented gearmotors.
Describe the torque, shaft configuration, or equipment you're replacing a motor on. ChatMRO finds the exact Dayton match, shows alternatives, and gives you a quote — in seconds. No part number needed.
Updated
AI-generated imageA 24 RPM 115V open vented AC/DC gearmotor combines a universal motor (capable of running on either AC or DC input) with a right-angle gear reduction unit, taking a high-speed, low-torque motor input and converting it to a slow, high-torque rotary output through a fixed gear ratio — commonly 229:1 on this class of unit. The open vented enclosure allows air-over cooling through the motor housing, distinguishing it from totally enclosed (TENV/TEFC) gearmotor designs used in dirtier or washdown environments.
Foodservice equipment technicians, OEM equipment builders, and general industrial maintenance teams rely on this specific gearmotor class for slow-rotation drive applications — rotisserie ovens, warmers, display cases, and small conveyor or indexing mechanisms are common uses, with direct cross-reference fitment to commercial kitchen equipment brands like Vulcan Hart being especially common. The universal AC/DC motor design's reversible rotation, all-position mounting, and replaceable brushes make it a versatile, easily serviced drive component wherever a compact, low-cost slow-speed motor is needed. Where the drive is direct rather than geared and starting torque matters more than slow output speed, a capacitor-start general purpose motor covers that end of the range.
Common configuration: 1/15-1/6 HP input power, 24 RPM nameplate output speed, 115V AC or DC operation at 50/60 Hz, maximum torque around 85 in-lb, overhung load capacity around 100 lb, right-angle shaft orientation with 1/2" output shaft diameter, die-cast zinc gearcase with grease-filled lubrication, steel input gear and cast iron output gear, bronze sleeve bearings, Class B motor insulation, and replaceable brushes rated for approximately 300 hours of life.
Stop second-guessing. Match your use case below — then let ChatMRO's AI surface the exact model variant, shaft configuration, and alternatives in one natural-language search.
Direct replacement for commercial kitchen rotisserie and warmer drive motors. Standard single or right-hand output configurations dominate here.
Equipment requiring drive output on both sides of the gearbox, such as dual-spit rotisseries or symmetric display mechanisms.
Installations requiring a specific output shaft side (left-hand vs. standard) to match existing equipment mounting.
Dayton (Grainger's private-label industrial brand) manufactures this 24 RPM 115V open vented gearmotor across several model number variants distinguished by output shaft configuration and location. Here's how to navigate the lineup without a 40-tab browser session.
ChatMRO indexes the full Dayton gearmotor catalogue. Search any product by description, application, or rough spec.
The general-purpose workhorse. 1/15-1/6 HP input, 24 RPM nameplate speed, 1.3A at 115V AC/DC, 50/60 Hz. 85 in-lb max torque, 229:1 gear ratio, 1/2" output shaft, right angle orientation, reversible CW/CCW rotation, UL Recognized.
Search 1LRA1 Series →Same core specifications as the standard model with a double output shaft configuration (1/2" x 1-5/8") for applications needing drive output on both sides of the gearbox. 100 lb overhung load capacity, all-position mounting.
Search 1LRA1 Double-Shaft Variant →Identical motor and gearcase specifications to the 1LRA-series, configured with output location on the left-hand side for equipment requiring that specific mounting orientation. Die-cast zinc gearcase, grease-filled lubrication.
Search 1LPZ8/1LPZ9 Series →Use this table as a decision shortcut. Ask ChatMRO for the exact part once you know which row fits your spec.
| Model | Output Shaft Config | Output Location | Best For | Max Torque | Gear Ratio | ChatMRO Verdict |
|---|---|---|---|---|---|---|
| Dayton 1LRA1 | Single, 1/2" dia. | Standard/right hand | General single-output drive replacement | 85 in-lb | 229:1 | Best all-around choice for standard slow-speed drive replacement |
| Dayton 1LRA1 (double shaft variant) | Double, 1/2" x 1-5/8" | Both sides | Dual-spit rotisseries, symmetric drive mechanisms | 85 in-lb | 229:1 | Go-to when drive output is needed on both sides of the gearbox |
| Dayton 1LRA2/1LRA3/1LRA5 | Model-specific variant | Model-specific | Direct cross-reference to specific OEM equipment models | 85 in-lb (typical) | 229:1 (typical) | Use when your equipment's OEM part number matches this specific variant |
| Dayton 1LPZ8 | Model-specific | Left-hand | Equipment requiring left-hand output orientation | 85 in-lb | 229:1 | Best when mounting orientation requires left-hand output |
| Dayton 1LPZ9 | Model-specific | Left-hand | Equipment requiring left-hand output, alternate configuration | 85 in-lb | 229:1 | Use as an alternate left-hand configuration if 1LPZ8 doesn't match |
| Generic Import 24 RPM Gearmotor | Variable | Variable | Budget, occasional light use | Manufacturer-stated only | Variable | Verify UL recognition and exact shaft/output configuration before ordering |
Not sure which row is yours? Describe your application to ChatMRO and get an instant AI-matched recommendation with datasheets.
Traditional catalogues force you to know the exact MPN before you find anything. ChatMRO flips that: describe what you need in plain English, and the AI finds the right gearmotor from 30M+ indexed parts.
In plain language — by torque, shaft configuration, or equipment being replaced. No MPN required.
Natural language processing maps your description to the closest-fit products across brands and specs.
Cross-brand equivalents, lower-cost substitutes, and in-stock alternatives shown side-by-side.
Add to cart or request RFQ directly from the results. No phone calls. No email chains.
Whether you're a foodservice equipment technician replacing a rotisserie drive, or an OEM builder specifying a slow-speed motor for a new mechanism — use this framework before you procure.
This gearmotor family is cross-referenced to specific commercial equipment models — checking your equipment's original part number (e.g., against Vulcan Hart or similar brands) can quickly identify the exact matching Dayton variant.
Confirm whether your application needs drive output from one side of the gearbox only, or from both sides (double output shaft) — installing the wrong configuration means the mechanism won't connect properly.
Some equipment mounts require the output shaft on a specific side of the gearbox — confirm this against your existing unit or equipment drawing before ordering.
The standard 85 in-lb max torque and 100 lb overhung load capacity cover most slow-rotation drive applications, but verify against your specific mechanism's resistance and mounted load before relying on this rating.
Open vented (air-over) enclosures are not sealed for washdown or heavy moisture exposure — confirm this matches your installation location, especially in food service environments with regular cleaning. The same open-versus-enclosed judgement applies when specifying a plain drive motor, covered in open drip proof motor selection.
Multiple model variants share the same 24 RPM/115V rating but differ in shaft configuration and output location. Search by function on ChatMRO — the AI surfaces exact matches AND available substitutes with the correct shaft configuration.
This enclosure type is not sealed for direct washdown spray — confirm the installation location's moisture exposure matches the open vented rating before installing.
Brushes on this universal AC/DC motor design are rated for approximately 300 hours of life and are replaceable — factor this into maintenance planning rather than assuming the full gearmotor needs replacement when performance degrades.
Describing your application to ChatMRO takes 30 seconds. The AI reads the full Dayton gearmotor catalogue so you don't have to.
Just describe what you need. ChatMRO finds the right 24 RPM 115V open vented gearmotor in seconds.
24 RPM 115V open vented AC/DC gearmotors are among the most widely specified slow-speed drive components for commercial kitchen equipment, OEM machine builds, and general industrial indexing mechanisms. The Dayton brand commands significant market presence due to its proven universal AC/DC motor design, 229:1 gear ratio right-angle gearcase construction, and broad cross-reference compatibility with commercial equipment brands including Vulcan Hart, spanning multiple output shaft and location configurations. Procurement professionals and equipment technicians in India, Southeast Asia, and North America regularly source these gearmotors for rotisserie and warmer drive replacement, small conveyor mechanisms, and general OEM slow-rotation equipment builds. Indexing builds of that kind usually pair the gearmotor with a spring pin plunger limit switch to stop rotation at a set position.
ChatMRO simplifies this procurement process by providing AI-powered natural language search across a catalogue of 30 million+ indexed industrial parts. Buyers no longer need to memorize MPN codes or navigate multi-level filter trees to find the right gearmotor. A simple description of the torque, shaft configuration, or equipment being replaced is sufficient to surface the correct Dayton product alongside cross-brand alternatives and real-time pricing.
