Parker ssh3-62y
ChatMRO

The Parker SSH3-62Y is in our catalogue: Material Type 316 Stainless Steel, Body Size 3/8, Thread Size 3/8-18 NPTF.

ChatMRO can make mistakes, so double check it

In stockHydraulic Quick Coupling - 3/8-18 NPTF Female Thread, Type 316 Stainless Steel
Parker · SSH3-62Y

Hydraulic Quick Coupling - 3/8-18 NPTF Female Thread, Type 316 Stainless Steel

$ 268.00per unit · ex. VAT
General purpose 60 Series manual sleeve, poppet valve hydraulic quick coupling with double shut-off. Constructed from Type 316 stainless steel with fluorocarbon seals, rated for dynamic applications up to 1,500 psi and low-cycle non-pulsating service up to 5,000 psi. Complies with ISO 7241 Series B standard.
Material
Type 316 Stainless Steel
Body Size
3/8
Thread Size
3/8-18 NPTF
Wrench Flats
0.88
Overall Length
2.49
MaterialType 316 Stainless Steel
Body Size3/8
Thread Size3/8-18 NPTF
Wrench Flats0.88
Rated Flow6 gpm
Vacuum Data27.4 inches Hg (-0.9 Bar) both connected and disconnected. (1-1/2 inch and 2-1/2” body size 60 Series couplings are not recommended for service in disconnected mode)
Industry StandardISO 7241 Series B
ANSI/ISO Pressure RatingDynamic applications with normal to moderate hydraulic shocks such as general industrial equipment, hydraulic presses, agricultural equipment, etc. Impulse tested at a multiple (125 percent to 133 percent) of rated pressure.
Seal Temperature Range - Fluorocarbon-15 degree Fahrenheit to +400 degree Fahrenheit (Standard seal for 316 Stainless Steel couplings).
Rated Pressure (psi) - Stainless Steel1500
Low Cycle, Non-pulsating Pressure RatingApplications with lower cycle life and no severe cyclic pressure fluctuations, essentially steady pressure during an operating cycle. Typical applications include hydraulic jacks, mine roof support systems, and high pressure fluid transfer (pumping water or slurry in oil wells). Minor pump ripple is considered non-pulsating. Impulse tested at rated pressure.
Rated Pressure (psi) - Low Cycle, Non-pulsating - Stainless Steel5000