Parker sh3-62-t8
ChatMRO

The Parker SH3-62-T8 is in our catalogue: Body Size 3/8, Thread Size 3/4-16 ORB, Wrench Flats 1.00.

ChatMRO can make mistakes, so double check it

Parker · SH3-62-T8

Hydraulic Quick Coupling, 3/8 Inch Body, 3/4-16 ORB Thread, Type 303 Stainless Steel

$ 367.42per unit · ex. VAT
General purpose hydraulic quick coupling from the Parker 60 Series, featuring a manual sleeve and poppet valve design. Constructed with Type 303 stainless steel body and Nitrile seals, compliant with ISO 7241 Series B standard. Suitable for dynamic applications with moderate hydraulic shocks in industrial, agricultural, and high-pressure fluid transfer systems.
Body Size
3/8
Thread Size
3/4-16 ORB
Wrench Flats
1.00
Overall Length
2.75
Largest Diameter
1.40
Body Size3/8
Thread Size3/4-16 ORB
Wrench Flats1.00
Rated Flow6 gpm
Vacuum Data27.4 inches Hg (-0.9 Bar) both connected and disconnected. (1-1/2 inch and 2-1/2” body size 60 Series couplings are not recommended for service in disconnected mode)
Industry StandardParker 60 Series couplings comply with ISO 7241 Series B Standard.
ANSI/ISO Pressure RatingDynamic applications with normal to moderate hydraulic shocks such as general industrial equipment, hydraulic presses, agricultural equipment, etc. Impulse tested at a multiple (125 percent to 133 percent) of rated pressure.
Seal Temperature Range - Nitrile-40 degree Fahrenheit to +250 degree Fahrenheit (Standard seal for Brass, Steel, & 303 Stainless Steel couplings).
Rated Pressure (psi) - Stainless steel5000
Low Cycle, Non-pulsating Pressure RatingApplications with lower cycle life and no severe cyclic pressure fluctuations, essentially steady pressure during an operating cycle. Typical applications include hydraulic jacks, mine roof support systems, and high pressure fluid transfer (pumping water or slurry in oil wells). Minor pump ripple is considered non-pulsating. Impulse tested at rated pressure.
Valve TypePoppet
Shut OffDouble