ChatMRO
Find the right industrial part, just by asking
Email us at [email protected] or call +1 910 713 1311
Mercoid sblt2-5-40
The dwyer instruments sblt2-5-40 is in our catalogue: sensor length 6.7", cable length 40 ft., pressure rating 0 psi to 5 psi.
In stock
dwyer instruments · SBLT2-5-40
mercoid sblt2-5-40 submersible level transmitter 0 to 5 psi
Sensor length
6.7"
Cable length
40 ft.
Pressure rating
0 psi to 5 psi
Power required
13-30V DC
Output
4-20 mA
Sensor length6.7"
Cable length40 ft.
Pressure rating0 psi to 5 psi
Power required13-30V DC
Output4-20 mA
Output amps4-20 mA
Operating temp. range0°F to +150°F
Pressure range0 psi to 5 psi
Cable coatingPolyurathane
TypeBullet Nose
Process connection size1/2"
Cable materialPolyurethane
Connection typeNPT
Electrical protectionYes
GradeGrade 316
Housing materialStainless Steel
Maximum pressure5 psi
Sensor dia.1"
Standard logoCE.png
Measuring depth0 ft. to 11.5 ft.
Manufacturers warranty length1 yr.
Minimum pressure0 psi
SeriesSBLT2 Series
Thermal error-0.02% to +0.02%
Accuracy±0.25% of Full Scale
Electrical connectionsCable & Wire Leads
Seal materialFluoroelastomer
Tip designBullet Nose
Maximum operating temperature150°F
Minimum operating temperature0°F
Overall height7.187"
Maximum loop resistance900 ohms
Response time50 ms
Overall dia.1"
Mfr. seriesSblt2
Cable length-submersible transmitter40 ft.
Measuring depth-submersible transmitter0 ft. to 11.5 ft.
IncludedInstruction
Pressure0 psi to 5 psi
Pressure range-submersible transmitter0 psi to 5 psi
Max. loop resistance900 ohms
Max. pressure5 psi
Mounting orientationSuspended in tank below level being measured.
Pressure limit2X FS.
Thermal effect±0.02% full scale/°F.
Compensated temperature rangeSBLT2: 0 to 140°F (-18 to 60°C); SBLTX: 0 to 176°F (-18 to 80°C).
Temperature limitSBLT2: Polyurethane: 0 to 150°F (-18 to 66°C); ETFE: 0 to200°F (-18 to 93°C); SBLTX -4 to 176°F (-20 to 80°C); Polyurethane: -4 to 149°F(-20 to 65°C).
Wetted materialsBody: 316 SS, 316L SS; Bullet nose: PVC; Cable: Polyether polyurethane or ETFE; Seals: Fluoroelastomer.
Power requirementSBLT2: 10 to 30 VDC (≤1000 ft (305 m) of cable); SBLTX: 10 to 28 VDC.
ServiceCompatible liquids.
ComplianceSBLT2: CE; SBLTX: CE, cULus intrinsically safe for Class I,Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G; Class III Div. 1; ATEX: II1 G Ex ia IIC T4 Ga and II 1 D Ex ia IIIC T135C Da (according to control drawing001833-43)*.
Output signal4 to 20 mA DC, 2-wire.
Sensing modePiezoresistive
Body styleSubmersible
TerminationCable
Supply voltage13-30 VDC
Ip ratingIP66
Measurement range11.54 ft
Mounting typeHanging