Frequency60 Hz
Standard logoccsaus.png
Amps1.43A
Voltage230V AC
Motor enclosure designOpen Fan Cooled
Gasket materialBuna N
Housing materialGlass Filled Polypropylene
Temp (f) @ 30 psig120°F
Temp (f) @ 20 psig140°F
Flow rate @ 1 ft.8.5 GPM
Impeller materialGlass Filled Polypropylene
Temp (f) @ 10 psig150°F
DesignGravity-Feed, Requires The Pump Inlet To Be Lower Than Liquid Level
ApplicationFor Mild Chemicals At Moderate Temperature, Eliminates Seal Caused Friction Loss, Wear, Contamination And Leakage
SeriesMD-SC Series
TypeMagnetic Drive
Outlet size1/2"
Inlet typeFNPT
Inlet size1/2"
Outlet typeNPT
Watts100 W
Specific gravity1.1
Mounting orientationHorizontal
Cord length6 ft.
Phase1
Max. ambient temp.77°F
Max. flow rate8.5 GPM
Max. flow rate @ 60 hz8.5 GPM
Flow rate @ 6 ft.6.8 GPM
Max. outlet pressure6.3 psi
Flow rate @ 3 ft.7.8 GPM
Max. fluid temp.150°F
Flow rate @ 9 ft.5.5 GPM
Liquid temp.150°F
Gpm of water @ 3 ft.7.7 GPM
Max. head14.6 ft.
Temp (f) @ 0 psig150°F
Bearing typeThrust
Cord type3-conductor SJP
Discharge pipe size1/2"
Intake pipe size1/2"
Hp1/25 hp
Discharge port size1/2"
Discharge port typeNPT
Max. specific gravity1.1
Motor mounting typeHorizontal
Manufacturers warranty length1 yr.
Suction port1/2" FNPT
Discharge pipe typeNPT
Intake pipe typeFNPT
Full load current1.43A
Nameplate voltage115V AC
Overall height4.9"
Overall width3.9"
Max. discharge pressure6.3 psi
Max. flow rate @ 3 ft of head7.8 GPM
Max. flow rate @ 6 ft of head6.8 GPM
Max. flow rate @ 9 ft of head5.5 GPM
Max. ft. of head14.6 ft.
Max. viscosity100 SUS
Max. flow rate @ 50 ft of headNot Applicable
Max. hp1/25 hp
Max. flow rate @ 18 ft of headNot Applicable
Max. flow rate @ 15 ft of headNot Applicable
Max. flow rate @ 40 ft of headNot Applicable
Max. flow rate @ 24 ft of headNot Applicable
MountingHorizontal
Mfr. seriesMd-Sc
Max. operating pressure6.3 psi
Operating pressure6.3 psi
Max. feet of head14.6 ft.
Rpm2900 RPM
Flow rate510 GPH
Washer materialTitanium
Volute materialGlass Filled Polypropylene
O-ring materialNitrile
Washer typeThrust Washer
Plug type3-Prong
Use withThermally Protected, Open, Fan-Cooled Motor
Shaft materialTitanium
Ambient air temp.77°F
Horsepower1/25
Temperature150°F
Wattage100
SpecificationCSA
MaterialPlastic
Total head height14 ft 7-13/64"
Electric / gasElectric
Discharge connection typeMNPT
Warranty1 yr
Inlet connection typeFNPT
Gallons per hour510 @ 1' gal/hr
Amperage0.64 A
Hertz50/60 Hz
ColorWhite
BrandLittle Giant
Temperature of liquid pumped150
Max exit pressure6.3 psi
Manufacturers part number580513
Motor typeOpen Fan-Cooled
Gallons per minute8.5 gal/min
Rotations per minute2700 rpm
Discharge connection size1/2 in
Inlet connection1/2 in
Max head14-5/8 ft
Electrical phaseSingle-Phase
Maximum head14‑5/8′
Outlet port size1/2″
Inlet port size1/2″
Temperature rating150
Pressure rating6.3psi
Power1/30hp
Unspsc code40151500
Amperage rating1.43 A
Uomeach
Product weight6.25