ChatMRO
Find the right industrial part, just by asking
Email us at [email protected] or call +1 910 713 1311
Finish Thompson sp10p-3-m219
The Finish Thompson sp10p-3-m219 is in our catalogue: inlet size 1", phase 3, self priming Yes.
In stock
Finish Thompson · SP10P-3-M219
finish thompson sp10p-3-m219 pump magnetic drive 208-230/460v
$ 2116.94per unit · ex. VAT
Inlet size
1"
Phase
3
Self priming
Yes
Flow rate @ 40 ft.
32 GPM
Length
22.1"
Inlet size1"
Phase3
Self primingYes
Flow rate @ 40 ft.32 GPM
Flow rate @ 50 ft.4 GPM
Gasket materialViton
Motor typeInduction
TypeSelf Priming
Compatible chemicalsDeionized Water
Outlet size1"
DesignCentrifugal
ApplicationHighly Corrosive Chemicals
SeriesSP10 Series
Impeller materialPolypropylene
Inlet typeFNPT
Housing materialPolypropylene
Outlet typeMNPT
Rpm3450 RPM
Hp1 hp
Motor enclosure designTotally Enclosed Fan Cooled
Mounting orientationHorizontal
Flow rate @ 1 ft.55 GPM
Max. fluid temp.180°F
Mounting locationOpen Air
Warranty5 yrs.
Temp (f) @ 0 psig180°F
Temp (f) @ 30 psig180°F
Temp (f) @ 20 psig180°F
Max. viscosity50 cPS
Flow rate @ 18 ft.52 GPM
Max. flow rate @ 15 ft.55 GPM
Flow rate @ 6 ft.55 GPM
Operating pressure21.6 psi
Flow rate @ 24 ft.46 GPM
Flow rate @ 3 ft.55 GPM
Flow rate @ 9 ft.55 GPM
Specific gravity1.8
Temp (f) @ 10 psig180°F
Horsepower (maximum)1 hp
Discharge pipe size1"
Intake pipe size1"
Overall height8 1/2"
Overall width7 1/2"
Flow rate @ 9 ft of head (maximum)55 GPM
Max. head50 ft.
Flow rate @ 18 ft of head (maximum)52 GPM
Viscosity (maximum)50 cPS
Flow rate @ 6 ft of head (maximum)55 GPM
Flow rate @ 24 ft of head (maximum)46 GPM
Flow rate @ 15 ft of head (maximum)55 GPM
Feet of head (maximum)63 ft.
Flow rate @ 3 ft of head (maximum)55 GPM
Flow rate @ 50 ft of head (maximum)4 GPM
Flow rate @ 40 ft of head (maximum)32 GPM
Operating pressure (maximum)21.6 psi
Chemical compatibilityDeionized Water
Motor mounting typeHorizontal
MountingHorizontal
Discharge port size1"
Discharge port typeMNPT
Suction port1" FNPT
Specific gravity (maximum)1.8 xg
Discharge pipe typeMNPT
Intake pipe typeFNPT
PrimingSelf Priming
Manufacturers warranty length5 yrs.
Motor speed (maximum)3450 RPM
Maximum head63′
Inlet port size1″
Temperature rating180
Pressure rating22psi
Power1hp
Flow rate55gal/min
Gallons per minute55.0 gal/min
Rotations per minute3450 rpm
Discharge connection size1 in
Inlet connection1 in
Max head63 ft
Electrical phaseThree-Phase
Voltage208/460V
Outlet port size1″
Inlet connection typeFNPT
Gallons per hour3300 gal/hr
Amperage1.4/2.8/2.96 A
Hertz60 Hz
ColorBlue
Horsepower1 HP
BrandFinish Thompson
Temperature of liquid pumped180
Discharge connection typeMNPT
Manufacturers part numberSP10P-3-M219
Max exit pressure22.0 psi
Gallons per minute @ bep35 gal/min