ChatMRO
Find the right industrial part, just by asking
Email us at [email protected] or call +1 910 713 1311
Finish Thompson db11p-m215
The Finish Thompson db11p-m215 is in our catalogue: inlet size 2", self priming Manual, height 10 4/5".
In stock
Finish Thompson · DB11P-M215
finish thompson db11p-m215 pump magnetic drive 2 hp 208-230/460v
$ 2566.70per unit · ex. VAT
Inlet size
2"
Self priming
Manual
Height
10 4/5"
Length
20 1/2"
Inlet type
FNPT
Inlet size2"
Self primingManual
Inlet typeFNPT
Motor enclosure designTotally Enclosed Fan Cooled
Mounting orientationHorizontal
Flow rate @ 50 ft.93 GPM
Hp2 hp
Max. viscosity100 cPS
Flow rate @ 1 ft.115 GPM
Max. fluid temp.180°F
Max. flow rate @ 15 ft.115 GPM
Flow rate @ 6 ft.115 GPM
Flow rate @ 24 ft.115 GPM
Flow rate @ 3 ft.115 GPM
Flow rate @ 9 ft.115 GPM
Max. operating pressure90 psi
TypeStraight
DesignCentrifugal
SeriesDB11 Series
Compatible chemicalsDeionized Water
Outlet size1 1/2"
Impeller materialPolypropylene
Rpm3450 RPM
Gasket materialViton
Phase3
Motor typeInduction
Flow rate @ 18 ft.115 GPM
Outlet typeMNPT
Bushing materialCarbon
Mounting locationOpen Air
Warranty5 yrs.
Temp (f) @ 0 psig180°F
Temp (f) @ 30 psig180°F
Temp (f) @ 20 psig180°F
Max. outlet pressure32 psi
Operating pressure32 psi
Specific gravity1.8
Flow rate @ 40 ft.104 GPM
Temp (f) @ 10 psig180°F
Housing materialPolypropylene
Discharge pipe size1 1/2"
Flow rate @ 50 ft of head (maximum)93 GPM
Flow rate @ 40 ft of head (maximum)104 GPM
Flow rate @ 18 ft of head (maximum)115 GPM
Viscosity (maximum)100 cPS
Feet of head (maximum)74 ft.
Flow rate @ 6 ft of head (maximum)115 GPM
Flow rate @ 24 ft of head (maximum)115 GPM
Flow rate @ 15 ft of head (maximum)115 GPM
Max. head73 ft.
Motor mounting typeHorizontal
MountingHorizontal
PrimingManual
Chemical compatibilityDeionized Water
Horsepower (maximum)2 hp
Intake pipe size2"
Overall width9.7"
Overall height10 4/5"
Operating pressure (maximum)32 psi
Flow rate @ 3 ft of head (maximum)115 GPM
Flow rate @ 9 ft of head (maximum)115 GPM
ApplicationAcids, Caustics, Di-Water, Plating Solutions
Discharge port size1 1/2"
Discharge port typeMNPT
Max. specific gravity1.8
Suction port2" FNPT
Discharge pipe typeMNPT
Intake pipe typeFNPT
Manufacturers warranty length5 yrs.
Max. discharge pressure32 psi
Max. flow rate @ 50 ft of head93 GPM
Motor speed (maximum)3450 RPM
Discharge port typeMNPT
Discharge port size1 1/2"