ChatMRO
Find the right industrial part, just by asking
Email us at [email protected] or call +1 910 713 1311
Eaton 421ak02114b
The Eaton 421ak02114b is in our catalogue: diagnostic pressure ports .4375-20 Unf-2B Sae O-Ring Ports-Suction And Pressure-Plugged, torque control setting 0 lbs.-in., drain port size and location 0.875-14 UNF-2B O-Ring Port, Top (28CC And 45CC).
In stock
Eaton · 421AK02114B
eaton 421ak02114b open circuit piston pump
$ 3527.28per unit · ex. VAT
Diagnostic pressure ports
.4375-20 Unf-2B Sae O-Ring Ports-Suction And Pressure-Plugged
Torque control setting
0 lbs.-in.
Drain port size and location
0.875-14 UNF-2B O-Ring Port, Top (28CC And 45CC)
Length
12.21"
Min. recommended operating viscosity
16 cST
Diagnostic pressure ports.4375-20 Unf-2B Sae O-Ring Ports-Suction And Pressure-Plugged
Torque control setting0 lbs.-in.
Drain port size and location0.875-14 UNF-2B O-Ring Port, Top (28CC And 45CC)
Min. recommended operating viscosity16 cST
Min. flow compensator setting19.31 Bar
Front mounting2 Bolt B
Min. pressure compensator setting206.8 Bar
Fluid cleanliness21/18/13
Max. pressure compensator setting213.7 Bar
Flow compensator setting - maximum22.06 Bar
Maximum case drain temp.220°F
Input speed at 0.8 bar absolute2400 RPM
Max. input torque2460 lbs.-in.
Response time25 ms
Input speed at 1.0 bar absolute2600 RPM
Theoretical input torque at max. displacement278 N-m
Inlet pressure280 Bar
Input speed at 2.0 bar absolute2800 RPM
Continuous allowable case pressure320 Bar
Bearing life at rated pressure3320 hrs.
Maximum case pressure350 Bar
Maximum input speed3600 RPM
Max. recommended operating viscosity40 cST
Nominal pressure rating4600 psi
Peak pressure rating5000 psi
Housing materialCast Iron
Min. input speed600 RPM
Max. input power75.6 kW
PaintBlue Primer Per Spec 209-13Cd
Max. displacement optionExternal Manual Stroke Adjustment (Set at Maximum)
Shaft seal materialFluorocarbon Rubber
IdentificationMark Eaton Product Number And Full Model Code On Label
Code titlePressure Compensated/Pressure Flow Compensated
Controller typePressure Compensator
Shaft rotationRight
Design codeSecond
Main port size and locationSide Ports, Suction - 2.00 SAE J518 4-Bolt Split Flange Port Standard Pressure Series (Code 61), Pressure - 1.00 SAE J518 4-Bolt Split Flange Port Standard Pressure Series (Code 61)
Input shaftStraight Shaft Diameter 25.4 [1.00], Keyway (SAE J744-25-1) (Key Included)
Displacement62.3 cc/rev.