ChatMRO
Find the right industrial part, just by asking
Email us at [email protected] or call +1 910 713 1311
Dixon Valve & Coupling 4ff4
The dixon valve and coupling 4ff4 is in our catalogue: fitting type FNPT, connection type NPT, seal material Nitrile.
In stock
dixon valve and coupling · 4FF4
dixon 4ff4 threaded coupler, 1/2 inch nptf, steel
$ 27.21per unit · ex. VAT
Fitting type
FNPT
Connection type
NPT
Seal material
Nitrile
Temperature rating
-40°F to +250°F
Length
3.06"
Fitting typeFNPT
Connection typeNPT
Seal materialNitrile
Temperature rating-40°F to +250°F
Outside dia.1 6/25"
GenderFemale
MaterialSteel
FinishTrivalent Chrome Plated
Hex size1"
Pipe size1/2"
Body size1/2"
Locking typeSleeve
Max. flow91 CFM
Temp. range-40°F to +250°F
Interchange typeIndustrial
SealsBuna N
Hose connection typeFNPT
For hose i.d.1/2"
Hose fitting size1/2"
Max. outside dia.1 1/4"
BarbedNo
Coupling componentSocket
Finish/coatingZinc Plated
Includes valveYes
Thread size1/2"
Thread typeNPTF
ColorSilver
Coupling locking typeSleeve
Hose fitting genderFemale
Valve typeTubular
Max. flow rate2576.83 LPM
Max. working pressure @ 70 f500 psi
ApplicationPneumatic, Pneumatic
TypePneumatic Quick Coupler
Product weight.49
Temperature-40°F - 250°F
Hose i d1/2"
Uomeach
Pressure rating500psi
Outlet port size1/2″
Inlet port size1/2″
Size b1/2"
Size a1/2"
Working pressure500 psi
Break quantity0
Optional package/box quantity5
Maximum od1.24"(31.4 mm)
ThreadNPTF
Temperature range-40°F to 250°F(-40°C to 121°C)
Hex1"
Max od1.24 in (31.4 mm)
Warning!This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. For more information go to www.P65Warnings.ca.gov
BrandDixon Valve & Coupling
Product typeSimple product
ProductCouplers
SeriesDF-Series Industrial
ConnectionFemale NPT
Min. temp (°f)-40
Max temp (°f)250
ConstructionMachined components are manufactured using solid bar stock. Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life. Nitrile (Buna-N) seals are standard; Steel componentry is plated using ROHS Compliant Trivalent Chrome. Steel sleeve and steel tubular valve
SpecificationsRated pressure for connected Steel Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 15,500 PSI (1,070 bar) Burst
Data1" Hex Size
How it worksTo disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free; Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand; After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted; After the line is fully exhausted, you are able to safely separate the nipple from the coupler.
Safety notesIt is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
InterchangeFoster 3, 4, 5 and 6 Series; Parker 20-Series Manual Interchange; Hansen 1000, 400 and 500
Gender 2Female
Connection size 21/2 in
Thread size 21/2-14
Dimensions1.24 in OD x 3.06 in L
Connection 11/2 in Quick Disconnect
Connection type 1Quick Disconnect
Connection size 11/2 in
Connection 21/2 in NPT
Connection type 2NPTF