ChatMRO
Find the right industrial part, just by asking
Email us at [email protected] or call +1 910 713 1311
Dixon Valve & Coupling 4060-da-ss
The dixon valve and coupling 4060-da-ss is in our catalogue: coupler size 4", adapter size 6", grade Grade 316.
In stock
dixon valve and coupling · 4060-DA-SS
dixon 4060-da-ss 4 inch reducer coupler x 6 inch adapter, 316 stainless steel, welded fabrication
$ 998.50per unit · ex. VAT
Coupler size
4"
Adapter size
6"
Grade
Grade 316
Seal
Nitrile Rubber
Cam type
Other
Coupler size4"
Adapter size6"
GradeGrade 316
SealNitrile Rubber
Cam typeOther
MaterialStainless Steel
ShapeStraight
Break quantity0
Max. operating pressure75 psi
Seal materialNitrile Rubber
Coupling size4 in (100 mm)
Maximum pressure75
Max operating pressure (psi)75
Domestic/importDomestic
End styleCoupler x Adapter
Fitting/connector typeReducing Coupling
Nominal size6 x 4 in
Pressure rating75 psi
TypeType DA
ManufacturerDixon Valve & Coupling Co
Warning!This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. For more information go to www.P65Warnings.ca.gov
Safety notesUnder no circumstances should cam and groove couplings be used for compressed air or steam service! Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Anderson Process.
OptionsOther gasket types are available, Contact Anderson Process.
NoteIn reducing couplings, the coupler is the first size in the part number.
How it worksTo make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down. Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter. No more fumbling with clamps, wire, clips or pins, just close the handles and the locking mechanism is engaged. Extremely easy to open, the releaser lever is under your thumb when you want to open the fitting, ergonomic.
SpecificationsProduced to interchange with all product produced to Commercial Item Description A-A-59326D.
ApplicationDesigned for use with liquids, consult Anderson Process for specific recommendations.
ConstructionBuna-N gasket; Produced as a welded fabrication
Psi75 PSI
ProductType DA Coupler x Adapter
SeriesDixon®
Product typeSimple product
BrandDixon Valve & Coupling
Shape (orientation)Straight
Ends configuration4in Female Cam & Groove X 6in Male Cam & Groove
Material(s)316 Stainless Steel
Maximum operating pressure75 PSI
Optional package/box quantity0