ChatMRO
Find the right industrial part, just by asking
Email us at [email protected] or call +1 910 713 1311
Dixon Valve & Coupling 400da-90al
The dixon valve and coupling 400da-90al is in our catalogue: material Aluminum, grade Grade 356T6, seal Nitrile Rubber.
In stock
dixon valve and coupling · 400DA-90AL
dixon 400da-90al coupler elbow, 4 inch size, 90 deg. bend, male adapter x female
$ 251.32per unit · ex. VAT
Material
Aluminum
Grade
Grade 356T6
Seal
Nitrile Rubber
Fitting shape
Type DA
Break quantity
0
MaterialAluminum
GradeGrade 356T6
SealNitrile Rubber
Fitting shapeType DA
Break quantity0
Pressure rating100 psi
Type90 Degree Elbow
Max. operating pressure100 psi
Seal materialNitrile Rubber
Size4"
Thread typeNon-Threaded
Maximum pressure100psi
Coupling typeCam & Groove
Coupling descriptorAdapter x 90° Coupler
Coupler size (fractional inch)4
Thread sizeNon-Threaded
Hose size4
Maximum pressure (psi - 2 decimals)100.00
Unspsc code40141734
Domestic/importDomestic
End styleMale Adapter x Female Coupler
Fitting/connector type90 deg Elbow
Nominal size4 in
ManufacturerDixon Valve & Coupling Co
Connection size 14 in
Connection size 24 in
Fitting type90 deg Elbow
Connection 14 in Fitting
Connection 24 in Fitting
Connection type 1Fitting
Connection type 2Fitting
Gender 1Male
Gender 2Female
How it worksTo make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down. Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter. No more fumbling with clamps, wire, clips or pins, just close the handles and the locking mechanism is engaged. Extremely easy to open, the releaser lever is under your thumb when you want to open the fitting, ergonomic.
Warning!This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. For more information go to www.P65Warnings.ca.gov
ProductElbows & Bends
Safety notesUnder no circumstances should cam and groove couplings be used for compressed air or steam service!; Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F (21°C) with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Anderson Process.
Product typeSimple product
BrandDixon Valve & Coupling
SpecificationsProduced to interchange with all product produced to Commercial Item Description A-A-59326D.
ApplicationDesigned for use with liquids, consult Anderson Process for specific recommendations.
Angle90°
Psi100 PSI
Maximum operating pressure100 PSI
Optional package/box quantity0