ShapeY
Size2"
GradeGrade 356T6
Break quantity0
Max. operating pressure250 psi
MaterialAluminum
Maximum pressure (psi - 2 decimals)250.00
Unspsc code40141734
Hose size2
Thread typeNon-Threaded
Maximum pressure250psi
TypeWye
Coupling typeCam & Groove
Coupling descriptorWye Coupler x Adapter
Coupler size (fractional inch)2
Thread sizeNon-Threaded
Maximum operating pressure250 PSI
ApplicationDesigned for use with liquids, consult Anderson Process for specific recommendations.
Safety notesUnder no circumstances should cam and groove couplings be used for compressed air or steam service!; Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F (21°C) with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Anderson Process.
Warning!This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. For more information go to www.P65Warnings.ca.gov
Psi250 PSI
ProductWyes
Product typeSimple product
BrandDixon Valve & Coupling
How it worksTo make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down. Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter. No more fumbling with clamps, wire, clips or pins, just close the handles and the locking mechanism is engaged. Extremely easy to open, the releaser lever is under your thumb when you want to open the fitting, ergonomic.
SpecificationsProduced to interchange with all product produced to Commercial Item Description A-A-59326D.
Mpn200YDAAAL
Optional package/box quantity5
Shape (orientation)Y
Material(s)Aluminum
Dimensions7-21/32 in H
Domestic/importDomestic
End styleCoupler x Adapter Wye
Fitting/connector typeCoupling
Nominal size2 in
Pressure rating250 psi
ManufacturerDixon Valve & Coupling Co